writeimage.sh

#!/bin/bash -e


function usage() {
    echo "Usage: $0 [options...]"
    echo ""
    echo "Available options:"
    echo "    <-i image_file> - indicates the path to the image file (e.g. -i /home/user/Download/file.img.gz)"
    echo "    <-d sdcard_dev> - indicates the path to the sdcard block device (e.g. -d /dev/mmcblk0)"
    echo "    [-m modem:apn:user:pwd:pin] - configures the mobile network modem (e.g. -m ttyUSB0:internet)"
    echo "    [-n ssid:psk] - sets the wireless network name and key (e.g. -n mynet:mykey1234)"
    echo "    [-s ip/cidr:gw:dns] - sets a static IP configuration instead of DHCP (e.g. -s 192.168.1.101/24:192.168.1.1:8.8.8.8)"
    exit 1
}

if [ -z "$1" ]; then
    usage 1>&2
fi

if [[ $(id -u) -ne 0 ]]; then echo "please run as root"; exit 1; fi

function msg() {
    echo " * $1"
}

while getopts "a:d:f:h:i:lm:n:o:p:s:w" o; do
    case "$o" in
        d)
            SDCARD_DEV=$OPTARG
            ;;
        i)
            DISK_IMG=$OPTARG
            ;;
        m)
            IFS=":" SETTINGS=($OPTARG)
            MODEM=${SETTINGS[0]}
            APN=${SETTINGS[1]}
            MUSER=${SETTINGS[2]}
            MPWD=${SETTINGS[3]}
            PIN=${SETTINGS[4]}
            ;;
        n)
            IFS=":" NETWORK=($OPTARG)
            SSID=${NETWORK[0]}
            PSK=${NETWORK[1]}
            ;;
        s)
            IFS=":" S_IP=($OPTARG)
            IP=${S_IP[0]}
            GW=${S_IP[1]}
            DNS=${S_IP[2]}
            ;;
        *)
            usage 1>&2
            ;;
    esac
done

if [ -z "$SDCARD_DEV" ] || [ -z "$DISK_IMG" ]; then
    usage 1>&2
fi

function cleanup {
    set +e

    # unmount sdcard
    umount ${SDCARD_DEV}* >/dev/null 2>&1
}

trap cleanup EXIT

BOOT=$(dirname $0)/.boot

if ! [ -f $DISK_IMG ]; then
    echo "could not find image file $DISK_IMG"
    exit 1
fi

gunzip=$(which unpigz 2> /dev/null || which gunzip 2> /dev/null || true)
unxz=$(which unxz 2> /dev/null || true)

if [[ $DISK_IMG == *.gz ]]; then
    if [ -z "$gunzip" ]; then
        msg "make sure you have the gzip package installed"
        exit 1
    fi
    msg "decompressing the .gz compressed image"
    $gunzip -c $DISK_IMG > ${DISK_IMG%???}
    DISK_IMG=${DISK_IMG%???}
elif [[ $DISK_IMG == *.xz ]]; then
    if [ -z "$unxz" ]; then
        msg "make sure you have the xz package installed"
        exit 1
    fi
    msg "decompressing the .xz compressed image"
    $unxz -T 0 -c $DISK_IMG > ${DISK_IMG%???}
    DISK_IMG=${DISK_IMG%???}
fi

umount ${SDCARD_DEV}* 2>/dev/null || true
msg "writing disk image to sdcard"
dd if=$DISK_IMG of=$SDCARD_DEV bs=1048576
sync

if which partprobe > /dev/null 2>&1; then
    msg "re-reading sdcard partition table"
    partprobe ${SDCARD_DEV}
    sleep 1
fi

msg "mounting sdcard"
mkdir -p $BOOT

if [ `uname` == "Darwin" ]; then
    BOOT_DEV=${SDCARD_DEV}s1 # e.g. /dev/disk4s1
    diskutil unmountDisk ${SDCARD_DEV}
    mount -ft msdos $BOOT_DEV $BOOT
else # assuming Linux
    BOOT_DEV=${SDCARD_DEV}p1 # e.g. /dev/mmcblk0p1
    if ! [ -e ${SDCARD_DEV}p1 ]; then
        BOOT_DEV=${SDCARD_DEV}1 # e.g. /dev/sdc1
    fi
    mount $BOOT_DEV $BOOT
fi

# wifi
if [ -n "$SSID" ]; then
    msg "creating wireless configuration"
    conf=$BOOT/wpa_supplicant.conf
    echo "update_config=1" > $conf
    echo "ctrl_interface=/var/run/wpa_supplicant" >> $conf
    echo "network={" >> $conf
    echo "    scan_ssid=1" >> $conf
    echo "    ssid=\"$SSID\"" >> $conf
    if [ -n "$PSK" ]; then
        echo "    psk=\"$PSK\"" >> $conf
    fi
    echo "}" >> $conf
    echo "" >> $conf
fi

# modem
if [ -n "$MODEM" ]; then
    msg "creating mobile network configuration"
    conf=$BOOT/ppp
    mkdir -p $conf
    echo $MODEM > $conf/modem
    echo "AT+CGDCONT=1,\"IP\",\"$APN\"" > $conf/apn
    echo > $conf/extra
    echo > $conf/auth
    echo > $conf/pin
    if [ -n "$MUSER" ]; then
        echo "user \"$MUSER\"" > $conf/auth
        echo "password \"$MPWD\"" >> $conf/auth
    fi
    if [ -n "$PIN" ]; then
        echo "AT+CPIN=$PIN" > $conf/pin
    fi
fi

# static ip
if [ -n "$IP" ] && [ -n "$GW" ] && [ -n "$DNS" ]; then
    msg "setting static IP configuration"
    conf=$BOOT/static_ip.conf
    echo "STATIC_IP=\"$IP\"" > $conf
    echo "STATIC_GW=\"$GW\"" >> $conf
    echo "STATIC_DNS=\"$DNS\"" >> $conf
fi

msg "unmounting sdcard"
sync
umount $BOOT
rmdir $BOOT

msg "you can now remove the sdcard"