Icons for Apollo Automation

[LRuesink-WebArray]

Hi!

Can you create some icons for Apollo Automation (https://apolloautomation.com/)?
I'll need the following:

• Driver icon; I have a single driver for all sensors (so it should be a bit generic). Supported devices are AIR-1, MSR-2 and MTR-1
• Capability icons. I have a lot of custom capabilities, and I don't think it makes sense to make a new icon for all of them. Maybe we can create a couple generic ones? Otherwise the sensors tab of the device in the Homey app is just a bunch of boxes.

List of capabilities

measure_ammonia.json
measure_angle_1.json
measure_angle_2.json
measure_angle_3.json
measure_direction_1.json
measure_direction_2.json
measure_direction_3.json
measure_distance_1.json
measure_distance_2.json
measure_distance_3.json
measure_ethanol.json
measure_hydrogen.json
measure_methane.json
measure_moving_target_count.json
measure_no2.json
measure_nox.json
measure_pm_0_3_to_1.json
measure_pm_10_weight_concentration.json
measure_pm_1_to_2_5.json
measure_pm_1_weight_concentration.json
measure_pm_2_5_to_4.json
measure_pm_2_5_weight_concentration.json
measure_pm_4_to_10.json
measure_pm_4_weight_concentration.json
measure_presence_target_count.json
measure_radar_detection_distance.json
measure_radar_moving_distance.json
measure_radar_still_distance.json
measure_radar_zone_1_occupancy.json
measure_radar_zone_2_occupancy.json
measure_radar_zone_3_occupancy.json
measure_resolution_1.json
measure_resolution_2.json
measure_resolution_3.json
measure_speed_1.json
measure_speed_2.json
measure_speed_3.json
measure_still_target_count.json
measure_target_1_x.json
measure_target_1_y.json
measure_target_2_x.json
measure_target_2_y.json
measure_target_3_x.json
measure_target_3_y.json
measure_uv_index.json
measure_voc_quality.json
measure_zone_1_all_target_count.json
measure_zone_1_moving_target_count.json
measure_zone_1_still_target_count.json
measure_zone_2_all_target_count.json
measure_zone_2_moving_target_count.json
measure_zone_2_still_target_count.json
measure_zone_3_all_target_count.json
measure_zone_3_moving_target_count.json
measure_zone_3_still_target_count.json

Let me know if you need some more information on these capabilities.

Namespace: com.apolloautomation

[IvoDerksen]

Hi Lex!

Those are indeed a bunch of capabilities that you request :)

It does raise the question, are you presenting them all to the users? Since it is considered best practice not to overload the user.

So for my understanding, what is the context (for example what does target 1 and 2 do, and what is used for resolution?) and can we do with less capabilities to give a better overview and information readability for the user.

For the driver I'll pick the sweetest looking one, or do you have a preference?

Kind regards!
Ivo

[LRuesink-WebArray]

No all, but most of them are presented to users. But we certainly don't need different icons for all of them.
For example: still target count, moving target count and all target count could be 3 (or maybe even 1?) icon. Same for radar. Also angles/distance/direction (moving closer/moving away) are things that only need a single icon per set of capabilities.

For your understanding; the radar and mmWave sensors can track multiple targets (people) in the room, and will expose information on them as different sensors.

For the driver I'm not sure if we can do something "somewhat" generic, as the driver applies to all Apollo Automation sensors. But if you'd like to pick one or two, that's fine with me as well!