Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Build the tags v2.78.0+rev22 and then the console always keep "Returning to boot ROM..." #75

Open
yishinhung opened this issue Jul 21, 2022 · 1 comment

Comments

@yishinhung
Copy link

yishinhung commented Jul 21, 2022

Hi Balena member:
I try to build the image for ASUS tinker board by source tags v2.78.0+rev22.
But, I encounter the following console log and look like can't load the uboot nomally.
Did you have any idea about this?
Thank a lot!

  • Build environment: ubuntu 18.04
  • Command: ./balena-yocto-scripts/build/barys -m asus-tinker-board -d
  • Fail Log: Returning to boot ROM... <--- only have the log
  • Build Result:
    Summary: There were 34 WARNING messages shown.
    [000008356][LOG]Build for asus-tinker-board suceeded.
    [000008356][LOG]If build for asus-tinker-board succeeded, final image should have been generated here:
    [000008356][LOG] build/tmp/deploy/images/asus-tinker-board/balena-image-asus-tinker-board.balenaos-img
    [000008356][LOG]Done.
@yishinhung
Copy link
Author

Hi Balena member:
I try to build the v2.78.0+rev1 for asus tinker board.
But, I still ecounter the differenct fail in uboot.
Did you have any idea about this?
Thank a lot!

Build environment: ubuntu 18.04
Build tags: v2.78.0+rev1
Command: ./balena-yocto-scripts/build/barys -m asus-tinker-board -d
Fail Log:

U-Boot SPL 2017.07 (Jul 21 2022 - 03:50:28)
Returning to boot ROM...

U-Boot 2017.07 (Jul 21 2022 - 03:50:28 +0000)

Model: Tinker-RK3288
DRAM: 2 GiB
MMC: dwmmc@ff0c0000: 1, dwmmc@ff0f0000: 0
*** Error - default environment is too large

In: serial
Out: serial
Err: serial
Model: Tinker-RK3288
Net:
Error: ethernet@ff290000 address not set.
No ethernet found.
env_buf [32 bytes] too small for value of "bootcmd"
Hit any key to stop autoboot: 1 0

ERROR ### Please RESET the board

=========================================================
Build Result:
Summary: There were 34 WARNING messages shown.
[000008664][LOG]Build for asus-tinker-board suceeded.
[000008665][LOG]If build for asus-tinker-board succeeded, final image should have been generated here:
[000008665][LOG] build/tmp/deploy/images/asus-tinker-board/balena-image-asus-tinker-board.balenaos-img
[000008665][LOG]Done.
yihsin@asus-docker-env:/tmp/8fc5c413c664b3e7a05f1283e9a480eb$ ls -l build/tmp/deploy/images/asus-tinker-board/balena-image-asus-tinker-board.balenaos-img
lrwxrwxrwx 2 yihsin yihsin 65 Jul 21 05:34 build/tmp/deploy/images/asus-tinker-board/balena-image-asus-tinker-board.balenaos-img -> balena-image-asus-tinker-board-20220721031012.rootfs.balenaos-img

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
None yet
Projects
None yet
Development

No branches or pull requests

1 participant