Disabled Adapt Brightness Entity Switch changes brightness to 100% for ZHA group lights

[dn-gt]

• [Y] I have updated to the latest Adaptive Lighting version available in HACS.
• [Y] I have reviewed the Troubleshooting Section in the README.
• (If using Zigbee2MQTT) I have read the Zigbee2MQTT troubleshooting guide in the README.
• [Y] I have checked the V2 Roadmap and open issues to ensure my issue isn't a duplicate.

Required information for bug reports:

Please include the following information in your issue.

2. Your Adaptive Lighting configuration:

3. (If using Zigbee2MQTT), provide your configuration files (remove all personal information before posting):
   Using ZHA with multiple Zigbee groups containing different Philips Hue bulbs (GU10 Color, Filament bulbs).

The issue does not seem to be present with a group of similar lights controlled with the Philps Hue integration!

4. Describe the bug and how to reproduce it:

I wanted to use multiple different Adaptive Lighting configurations for different rooms and zones. After experimenting a lot I had always issues with different kind of color temperatures because the settings are not consistent. Therefore I wanted to change the approach and have one universal configuration for the Color Temperature in combination with multiple room/zone dependent configurations for Brightness only. My idea was to switch off the relevant entity Adaptive Lighting Adapt Brightness for the univerals Color Temperature Configuration resp. Adaptive Lighting Adapt Color for the room/zone configurations.

While the disabled swith Adaptive Lighting Adapt Color is working properly, the diesabled entity Adaptive Lighting Adapt Brightness does not work like wanted, because the brightness is touched during light turn on and is increased to 100%. This is the case even when both configurations are not working simultaniously but also if only the Color Temperature Configuration (with disabled entity Adaptive Lighting Adapt Brightness ) is active.

5. Steps to reproduce the behavior:

Configure at least two bulbs in a ZHA group, include the group in a configuration of Adaptive Lighting.

Disable the entity Adaptive Lighting Adapt Brightness for the relevant configuration.

Swith the Light On, manually change the brightness to value 10%

Swith the Light Off, switch it on again. After very few time the light is adjusted to 100% brightness (even if startup brightness for the bulb is configured at only 20% in ZHA settings)