Update README.md

Moved the tip about erasing marauder firmware lower in the dev board section so that it is not assumed every user must do it.
bigbrodude6119 · Jul 5, 2023 · b040674 · b040674
1 parent 6b87f66
commit b040674
Showing 1 changed file with 2 additions and 2 deletions.
diff --git a/README.md b/README.md
@@ -49,8 +49,6 @@ If you want to create your own `index.html` file keep in mind that there is a li
 
 ## Installing/flashing the Wi-Fi dev board
 
-If you've already flashed your Wi-Fi dev board with the Marauder firmware or something else you will need to erase it before installing the new firmware here. Follow [the guide here](#erasing-firmware) for that.
-
 Follow the steps below to flash the Wi-Fi dev board with the evil portal firmware via Windows. The instructions below are for the Flipper Zero Wi-Fi Wrover Development Module (**ESP32-S2**), you may have to adjust the steps for your specific board:
 
 1. Download and install the Arduino IDE from [here][link-arduino].
@@ -78,6 +76,8 @@ Follow the steps below to flash the Wi-Fi dev board with the evil portal firmwar
     ```
 14. Plug in the Wi-Fi Dev board to the flipper, press the reset button on the Wi-Fi dev board and you should now see a solid blue light.
 
+Some users reported that if you've already flashed your Wi-Fi dev board with the Marauder firmware or something else you **might** need to erase it before installing the new firmware here. Follow [the guide here](#erasing-firmware) or the `Erasing firmware` section below if you run into issues. 
+
 ## Installing/flashing an ESP32 Wroom board
 
 Reddit user dellycem [compiled binaries](https://old.reddit.com/r/flipperzero/comments/14ni93r/i_made_a_evil_portal_app_for_the_fz_wifi_dev_board/jqd42fi/?context=3) for the ESP32 Wroom board if you would like to use that instead of the Wi-Fi devboard.