y stop mounting bracket doesnt account for the solder on the switch board

[traceoption]

the y stop bracket doesnt account for the solder on the back side of the switch board. the fix would be to put the cutout hole that's on the side that faces the 4040 on the side that faces the board instead.. I mean the board fits perfectly on the other side, like that cutout was meant to accomodate the back side of the board, but the screw countersinks that are used to mount the bracket to the 4040 are on the other side of the cutout. or just make that cutout go all the way through, the part doesnt go through a lot of stress.

[socketwench]

I discovered this as well. It seems like the opening was placed on the wrong side and the entire part needs to be mirrored from the z-axis in the exported STL.

[Tyler8299]

I put sharpie on the pins. Pressed into plastic and countersunk a few holes lolOn Jul 30, 2023, at 12:51 PM, socketwench ***@***.***> wrote: I discovered this as well. It seems like the opening was placed on the wrong side and the entire part needs to be mirrored from the z-axis in the exported STL. —Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>

[YoungHillionaire]

Had the same issue as well
Even in the cad files showing wrong orientation
Siboor github has the mirrored version