Kubernetes 开源不易，帮忙点个star，谢谢了🌹
kubernetes二进制安装
强烈建议在Github上查看文档。Github出问题会更新文档，并且后续尽可能第一时间更新新版本文档
1.21.13 和 1.22.10 和 1.23.3 和 1.23.4 和 1.23.5 和 1.23.6 和 1.23.7 和 1.24.0 和1.24.1 和1.24.2 文档以及安装包已生成。
我使用IPV6的目的是在公网进行访问，所以我配置了IPV6静态地址。
若您没有IPV6环境，或者不想使用IPv6，不对主机进行配置IPv6地址即可。
不配置IPV6，不影响后续，不过集群依旧是支持IPv6的。为后期留有扩展可能性。
https://github.com/cby-chen/Kubernetes/releases
手动项目地址：https://github.com/cby-chen/Kubernetes
脚本项目地址：https://github.com/cby-chen/Binary_installation_of_Kubernetes
kubernetes 1.24 变化较大，详细见：https://kubernetes.io/zh/blog/2022/04/07/upcoming-changes-in-kubernetes-1-24/
| 主机名称 | IP地址 | 说明 | 软件 |
|---|---|---|---|
| Master01 | 10.0.0.61 | master节点 | kube-apiserver、kube-controller-manager、kube-scheduler、etcd、 kubelet、kube-proxy、nfs-client |
| Master02 | 10.0.0.62 | master节点 | kube-apiserver、kube-controller-manager、kube-scheduler、etcd、 kubelet、kube-proxy、nfs-client |
| Master03 | 10.0.0.63 | master节点 | kube-apiserver、kube-controller-manager、kube-scheduler、etcd、 kubelet、kube-proxy、nfs-client |
| Node01 | 10.0.0.64 | node节点 | kubelet、kube-proxy、nfs-client |
| Node02 | 10.0.0.65 | node节点 | kubelet、kube-proxy、nfs-client |
| Node03 | 10.0.0.66 | node节点 | kubelet、kube-proxy、nfs-client |
| Node04 | 10.0.0.67 | node节点 | kubelet、kube-proxy、nfs-client |
| Node05 | 10.0.0.68 | node节点 | kubelet、kube-proxy、nfs-client |
| Lb01 | 10.0.0.70 | Lb01节点 | haproxy、keepalived |
| Lb02 | 10.0.0.80 | Lb02节点 | haproxy、keepalived |
| 10.0.0.69 | VIP |
| 软件 | 版本 |
|---|---|
| kernel | 5.18.0-1.el8 |
| CentOS 8 | v8 或者 v7 |
| kube-apiserver、kube-controller-manager、kube-scheduler、kubelet、kube-proxy | v1.24.2 |
| etcd | v3.5.4 |
| containerd | v1.6.6 |
| cfssl | v1.6.1 |
| cni | v1.1.1 |
| crictl | v1.24.2 |
| haproxy | v1.8.27 |
| keepalived | v2.1.5 |
网段
物理主机：10.0.0.0/24
service：10.96.0.0/12
pod：172.16.0.0/12
建议k8s集群与etcd集群分开安装
安装包已经整理好：https://github.com/cby-chen/Kubernetes/releases/download/v1.24.2/kubernetes-v1.24.2.tar
ssh [email protected] "nmcli con mod ens160 ipv4.addresses 10.0.0.61/24; nmcli con mod ens160 ipv4.gateway 10.0.0.1; nmcli con mod ens160 ipv4.method manual; nmcli con mod ens160 ipv4.dns "8.8.8.8"; nmcli con up ens160"
ssh [email protected] "nmcli con mod ens160 ipv4.addresses 10.0.0.62/24; nmcli con mod ens160 ipv4.gateway 10.0.0.1; nmcli con mod ens160 ipv4.method manual; nmcli con mod ens160 ipv4.dns "8.8.8.8"; nmcli con up ens160"
ssh [email protected] "nmcli con mod ens160 ipv4.addresses 10.0.0.63/24; nmcli con mod ens160 ipv4.gateway 10.0.0.1; nmcli con mod ens160 ipv4.method manual; nmcli con mod ens160 ipv4.dns "8.8.8.8"; nmcli con up ens160"
ssh [email protected] "nmcli con mod ens160 ipv4.addresses 10.0.0.64/24; nmcli con mod ens160 ipv4.gateway 10.0.0.1; nmcli con mod ens160 ipv4.method manual; nmcli con mod ens160 ipv4.dns "8.8.8.8"; nmcli con up ens160"
ssh [email protected] "nmcli con mod ens160 ipv4.addresses 10.0.0.65/24; nmcli con mod ens160 ipv4.gateway 10.0.0.1; nmcli con mod ens160 ipv4.method manual; nmcli con mod ens160 ipv4.dns "8.8.8.8"; nmcli con up ens160"
ssh [email protected] "nmcli con mod ens160 ipv4.addresses 10.0.0.66/24; nmcli con mod ens160 ipv4.gateway 10.0.0.1; nmcli con mod ens160 ipv4.method manual; nmcli con mod ens160 ipv4.dns "8.8.8.8"; nmcli con up ens160"
ssh [email protected] "nmcli con mod ens160 ipv4.addresses 10.0.0.67/24; nmcli con mod ens160 ipv4.gateway 10.0.0.1; nmcli con mod ens160 ipv4.method manual; nmcli con mod ens160 ipv4.dns "8.8.8.8"; nmcli con up ens160"
ssh [email protected] "nmcli con mod ens160 ipv4.addresses 10.0.0.68/24; nmcli con mod ens160 ipv4.gateway 10.0.0.1; nmcli con mod ens160 ipv4.method manual; nmcli con mod ens160 ipv4.dns "8.8.8.8"; nmcli con up ens160"
ssh [email protected] "nmcli con mod ens160 ipv4.addresses 10.0.0.70/24; nmcli con mod ens160 ipv4.gateway 10.0.0.1; nmcli con mod ens160 ipv4.method manual; nmcli con mod ens160 ipv4.dns "8.8.8.8"; nmcli con up ens160"
ssh [email protected] "nmcli con mod ens160 ipv4.addresses 10.0.0.80/24; nmcli con mod ens160 ipv4.gateway 10.0.0.1; nmcli con mod ens160 ipv4.method manual; nmcli con mod ens160 ipv4.dns "8.8.8.8"; nmcli con up ens160"
ssh [email protected] "nmcli con mod ens160 ipv6.addresses 2408:8207:78cc:5cc1:181c::10; nmcli con mod ens160 ipv6.gateway fe80::2e2:69ff:fe3f:b198; nmcli con mod ens160 ipv6.method manual; nmcli con mod ens160 ipv6.dns "2001:4860:4860::8888"; nmcli con up ens160"
ssh [email protected] "nmcli con mod ens160 ipv6.addresses 2408:8207:78cc:5cc1:181c::20; nmcli con mod ens160 ipv6.gateway fe80::2e2:69ff:fe3f:b198; nmcli con mod ens160 ipv6.method manual; nmcli con mod ens160 ipv6.dns "2001:4860:4860::8888"; nmcli con up ens160"
ssh [email protected] "nmcli con mod ens160 ipv6.addresses 2408:8207:78cc:5cc1:181c::30; nmcli con mod ens160 ipv6.gateway fe80::2e2:69ff:fe3f:b198; nmcli con mod ens160 ipv6.method manual; nmcli con mod ens160 ipv6.dns "2001:4860:4860::8888"; nmcli con up ens160"
ssh [email protected] "nmcli con mod ens160 ipv6.addresses 2408:8207:78cc:5cc1:181c::40; nmcli con mod ens160 ipv6.gateway fe80::2e2:69ff:fe3f:b198; nmcli con mod ens160 ipv6.method manual; nmcli con mod ens160 ipv6.dns "2001:4860:4860::8888"; nmcli con up ens160"
ssh [email protected] "nmcli con mod ens160 ipv6.addresses 2408:8207:78cc:5cc1:181c::50; nmcli con mod ens160 ipv6.gateway fe80::2e2:69ff:fe3f:b198; nmcli con mod ens160 ipv6.method manual; nmcli con mod ens160 ipv6.dns "2001:4860:4860::8888"; nmcli con up ens160"
ssh [email protected] "nmcli con mod ens160 ipv6.addresses 2408:8207:78cc:5cc1:181c::60; nmcli con mod ens160 ipv6.gateway fe80::2e2:69ff:fe3f:b198; nmcli con mod ens160 ipv6.method manual; nmcli con mod ens160 ipv6.dns "2001:4860:4860::8888"; nmcli con up ens160"
ssh [email protected] "nmcli con mod ens160 ipv6.addresses 2408:8207:78cc:5cc1:181c::70; nmcli con mod ens160 ipv6.gateway fe80::2e2:69ff:fe3f:b198; nmcli con mod ens160 ipv6.method manual; nmcli con mod ens160 ipv6.dns "2001:4860:4860::8888"; nmcli con up ens160"
ssh [email protected] "nmcli con mod ens160 ipv6.addresses 2408:8207:78cc:5cc1:181c::80; nmcli con mod ens160 ipv6.gateway fe80::2e2:69ff:fe3f:b198; nmcli con mod ens160 ipv6.method manual; nmcli con mod ens160 ipv6.dns "2001:4860:4860::8888"; nmcli con up ens160"
ssh [email protected] "nmcli con mod ens160 ipv6.addresses 2408:8207:78cc:5cc1:181c::90; nmcli con mod ens160 ipv6.gateway fe80::2e2:69ff:fe3f:b198; nmcli con mod ens160 ipv6.method manual; nmcli con mod ens160 ipv6.dns "2001:4860:4860::8888"; nmcli con up ens160"
ssh [email protected] "nmcli con mod ens160 ipv6.addresses 2408:8207:78cc:5cc1:181c::100; nmcli con mod ens160 ipv6.gateway fe80::2e2:69ff:fe3f:b198; nmcli con mod ens160 ipv6.method manual; nmcli con mod ens160 ipv6.dns "2001:4860:4860::8888"; nmcli con up ens160"hostnamectl set-hostname k8s-master01
hostnamectl set-hostname k8s-master02
hostnamectl set-hostname k8s-master03
hostnamectl set-hostname k8s-node01
hostnamectl set-hostname k8s-node02
hostnamectl set-hostname k8s-node03
hostnamectl set-hostname k8s-node04
hostnamectl set-hostname k8s-node05
hostnamectl set-hostname lb01
hostnamectl set-hostname lb02# 对于 CentOS 7
sudo sed -e 's|^mirrorlist=|#mirrorlist=|g' \
-e 's|^#baseurl=http://mirror.centos.org|baseurl=https://mirrors.tuna.tsinghua.edu.cn|g' \
-i.bak \
/etc/yum.repos.d/CentOS-*.repo
# 对于 CentOS 8
sudo sed -e 's|^mirrorlist=|#mirrorlist=|g' \
-e 's|^#baseurl=http://mirror.centos.org/$contentdir|baseurl=https://mirrors.tuna.tsinghua.edu.cn/centos|g' \
-i.bak \
/etc/yum.repos.d/CentOS-*.repo
# 对于私有仓库
sed -e 's|^mirrorlist=|#mirrorlist=|g' -e 's|^#baseurl=http://mirror.centos.org/\$contentdir|baseurl=http://10.0.0.123/centos|g' -i.bak /etc/yum.repos.d/CentOS-*.repoyum -y install wget jq psmisc vim net-tools nfs-utils telnet yum-utils device-mapper-persistent-data lvm2 git network-scripts tar curl -y1.下载kubernetes1.24.+的二进制包
github二进制包下载地址：https://github.com/kubernetes/kubernetes/blob/master/CHANGELOG/CHANGELOG-1.24.md
wget https://dl.k8s.io/v1.24.2/kubernetes-server-linux-amd64.tar.gz
2.下载etcdctl二进制包
github二进制包下载地址：https://github.com/etcd-io/etcd/releases
wget https://github.com/etcd-io/etcd/releases/download/v3.5.4/etcd-v3.5.4-linux-amd64.tar.gz
3.docker-ce二进制包下载地址
二进制包下载地址：https://download.docker.com/linux/static/stable/x86_64/
这里需要下载20.10.+版本
wget https://download.docker.com/linux/static/stable/x86_64/docker-20.10.14.tgz
4.containerd二进制包下载
github下载地址：https://github.com/containerd/containerd/releases
containerd下载时下载带cni插件的二进制包。
wget https://github.com/containerd/containerd/releases/download/v1.6.6/cri-containerd-cni-1.6.6-linux-amd64.tar.gz
5.下载cfssl二进制包
github二进制包下载地址：https://github.com/cloudflare/cfssl/releases
wget https://github.com/cloudflare/cfssl/releases/download/v1.6.1/cfssl_1.6.1_linux_amd64
wget https://github.com/cloudflare/cfssl/releases/download/v1.6.1/cfssljson_1.6.1_linux_amd64
wget https://github.com/cloudflare/cfssl/releases/download/v1.6.1/cfssl-certinfo_1.6.1_linux_amd64
6.cni插件下载
github下载地址：https://github.com/containernetworking/plugins/releases
wget https://github.com/containernetworking/plugins/releases/download/v1.1.1/cni-plugins-linux-amd64-v1.1.1.tgz
7.crictl客户端二进制下载
github下载：https://github.com/kubernetes-sigs/cri-tools/releases
wget https://github.com/kubernetes-sigs/cri-tools/releases/download/v1.24.2/crictl-v1.24.2-linux-amd64.tar.gzsystemctl disable --now firewalldsetenforce 0
sed -i 's#SELINUX=enforcing#SELINUX=disabled#g' /etc/selinux/configsed -ri 's/.*swap.*/#&/' /etc/fstab
swapoff -a && sysctl -w vm.swappiness=0
cat /etc/fstab
# /dev/mapper/centos-swap swap swap defaults 0 0# 方式一
# systemctl disable --now NetworkManager
# systemctl start network && systemctl enable network
# 方式二
cat > /etc/NetworkManager/conf.d/calico.conf << EOF
[keyfile]
unmanaged-devices=interface-name:cali*;interface-name:tunl*
EOF
systemctl restart NetworkManager# 服务端
yum install chrony -y
cat > /etc/chrony.conf << EOF
pool ntp.aliyun.com iburst
driftfile /var/lib/chrony/drift
makestep 1.0 3
rtcsync
allow 10.0.0.0/24
local stratum 10
keyfile /etc/chrony.keys
leapsectz right/UTC
logdir /var/log/chrony
EOF
systemctl restart chronyd
systemctl enable chronyd
# 客户端
yum install chrony -y
cat > /etc/chrony.conf << EOF
pool 10.0.0.61 iburst
driftfile /var/lib/chrony/drift
makestep 1.0 3
rtcsync
keyfile /etc/chrony.keys
leapsectz right/UTC
logdir /var/log/chrony
EOF
cat /etc/chrony.conf | grep -v "^#" | grep -v "^$"
pool 10.0.0.61 iburst
driftfile /var/lib/chrony/drift
makestep 1.0 3
rtcsync
keyfile /etc/chrony.keys
leapsectz right/UTC
logdir /var/log/chrony
systemctl restart chronyd ; systemctl enable chronyd
# 客户端安装一条命令
yum install chrony -y ; sed -i "s#2.centos.pool.ntp.org#10.0.0.61#g" /etc/chrony.conf ; systemctl restart chronyd ; systemctl enable chronyd
#使用客户端进行验证
chronyc sources -vulimit -SHn 65535
cat >> /etc/security/limits.conf <<EOF
* soft nofile 655360
* hard nofile 131072
* soft nproc 655350
* hard nproc 655350
* seft memlock unlimited
* hard memlock unlimitedd
EOFyum install -y sshpass
ssh-keygen -f /root/.ssh/id_rsa -P ''
export IP="10.0.0.61 10.0.0.62 10.0.0.63 10.0.0.64 10.0.0.65 10.0.0.66 10.0.0.67 10.0.0.68 10.0.0.70 10.0.0.80"
export SSHPASS=123123
for HOST in $IP;do
sshpass -e ssh-copy-id -o StrictHostKeyChecking=no $HOST
done# 为 RHEL-8或 CentOS-8配置源
yum install https://www.elrepo.org/elrepo-release-8.el8.elrepo.noarch.rpm
# 为 RHEL-7 SL-7 或 CentOS-7 安装 ELRepo
yum install https://www.elrepo.org/elrepo-release-7.el7.elrepo.noarch.rpm
# 查看可用安装包
yum --disablerepo="*" --enablerepo="elrepo-kernel" list available# 安装最新的内核
# 我这里选择的是稳定版kernel-ml 如需更新长期维护版本kernel-lt
yum --enablerepo=elrepo-kernel install kernel-ml
# 查看已安装那些内核
rpm -qa | grep kernel
kernel-core-4.18.0-358.el8.x86_64
kernel-tools-4.18.0-358.el8.x86_64
kernel-ml-core-5.16.7-1.el8.elrepo.x86_64
kernel-ml-5.16.7-1.el8.elrepo.x86_64
kernel-modules-4.18.0-358.el8.x86_64
kernel-4.18.0-358.el8.x86_64
kernel-tools-libs-4.18.0-358.el8.x86_64
kernel-ml-modules-5.16.7-1.el8.elrepo.x86_64
# 查看默认内核
grubby --default-kernel
/boot/vmlinuz-5.16.7-1.el8.elrepo.x86_64
# 若不是最新的使用命令设置
grubby --set-default /boot/vmlinuz-「您的内核版本」.x86_64
# 重启生效
reboot
# v8 整合命令为：
yum install https://www.elrepo.org/elrepo-release-8.el8.elrepo.noarch.rpm -y ; yum --disablerepo="*" --enablerepo="elrepo-kernel" list available -y ; yum --enablerepo=elrepo-kernel install kernel-ml -y ; grubby --default-kernel ; reboot
# v7 整合命令为：
yum install https://www.elrepo.org/elrepo-release-7.el7.elrepo.noarch.rpm -y ; yum --disablerepo="*" --enablerepo="elrepo-kernel" list available -y ; yum --enablerepo=elrepo-kernel install kernel-ml -y ; grubby --set-default \$(ls /boot/vmlinuz-* | grep elrepo) ; grubby --default-kernelyum install ipvsadm ipset sysstat conntrack libseccomp -y
cat >> /etc/modules-load.d/ipvs.conf <<EOF
ip_vs
ip_vs_rr
ip_vs_wrr
ip_vs_sh
nf_conntrack
ip_tables
ip_set
xt_set
ipt_set
ipt_rpfilter
ipt_REJECT
ipip
EOF
systemctl restart systemd-modules-load.service
lsmod | grep -e ip_vs -e nf_conntrack
ip_vs_sh 16384 0
ip_vs_wrr 16384 0
ip_vs_rr 16384 0
ip_vs 180224 6 ip_vs_rr,ip_vs_sh,ip_vs_wrr
nf_conntrack 176128 1 ip_vs
nf_defrag_ipv6 24576 2 nf_conntrack,ip_vs
nf_defrag_ipv4 16384 1 nf_conntrack
libcrc32c 16384 3 nf_conntrack,xfs,ip_vscat <<EOF > /etc/sysctl.d/k8s.conf
net.ipv4.ip_forward = 1
net.bridge.bridge-nf-call-iptables = 1
fs.may_detach_mounts = 1
vm.overcommit_memory=1
vm.panic_on_oom=0
fs.inotify.max_user_watches=89100
fs.file-max=52706963
fs.nr_open=52706963
net.netfilter.nf_conntrack_max=2310720
net.ipv4.tcp_keepalive_time = 600
net.ipv4.tcp_keepalive_probes = 3
net.ipv4.tcp_keepalive_intvl =15
net.ipv4.tcp_max_tw_buckets = 36000
net.ipv4.tcp_tw_reuse = 1
net.ipv4.tcp_max_orphans = 327680
net.ipv4.tcp_orphan_retries = 3
net.ipv4.tcp_syncookies = 1
net.ipv4.tcp_max_syn_backlog = 16384
net.ipv4.ip_conntrack_max = 65536
net.ipv4.tcp_max_syn_backlog = 16384
net.ipv4.tcp_timestamps = 0
net.core.somaxconn = 16384
net.ipv6.conf.all.disable_ipv6 = 0
net.ipv6.conf.default.disable_ipv6 = 0
net.ipv6.conf.lo.disable_ipv6 = 0
net.ipv6.conf.all.forwarding = 0
EOF
sysctl --systemcat > /etc/hosts <<EOF
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
2408:8207:78cc:5cc1:181c::10 k8s-master01
2408:8207:78cc:5cc1:181c::20 k8s-master02
2408:8207:78cc:5cc1:181c::30 k8s-master03
2408:8207:78cc:5cc1:181c::40 k8s-node01
2408:8207:78cc:5cc1:181c::50 k8s-node02
2408:8207:78cc:5cc1:181c::60 k8s-node03
2408:8207:78cc:5cc1:181c::70 k8s-node04
2408:8207:78cc:5cc1:181c::80 k8s-node05
2408:8207:78cc:5cc1:181c::90 lb01
2408:8207:78cc:5cc1:181c::100 lb02
10.0.0.61 k8s-master01
10.0.0.62 k8s-master02
10.0.0.63 k8s-master03
10.0.0.64 k8s-node01
10.0.0.65 k8s-node02
10.0.0.66 k8s-node03
10.0.0.67 k8s-node04
10.0.0.68 k8s-node05
10.0.0.70 lb01
10.0.0.80 lb02
10.0.0.69 lb-vip
EOFwget https://github.com/containernetworking/plugins/releases/download/v1.1.1/cni-plugins-linux-amd64-v1.1.1.tgz
#创建cni插件所需目录
mkdir -p /etc/cni/net.d /opt/cni/bin
#解压cni二进制包
tar xf cni-plugins-linux-amd64-v1.1.1.tgz -C /opt/cni/bin/
wget https://github.com/containerd/containerd/releases/download/v1.6.6/cri-containerd-cni-1.6.6-linux-amd64.tar.gz
#解压
tar -xzf cri-containerd-cni-*-linux-amd64.tar.gz -C /
rm -rf /etc/cni/net.d/10-containerd-net.conflist
#创建服务启动文件
cat > /etc/systemd/system/containerd.service <<EOF
[Unit]
Description=containerd container runtime
Documentation=https://containerd.io
After=network.target local-fs.target
[Service]
ExecStartPre=-/sbin/modprobe overlay
ExecStart=/usr/local/bin/containerd
Type=notify
Delegate=yes
KillMode=process
Restart=always
RestartSec=5
LimitNPROC=infinity
LimitCORE=infinity
LimitNOFILE=infinity
TasksMax=infinity
OOMScoreAdjust=-999
[Install]
WantedBy=multi-user.target
EOFcat <<EOF | sudo tee /etc/modules-load.d/containerd.conf
overlay
br_netfilter
EOFsystemctl restart systemd-modules-load.servicecat <<EOF | sudo tee /etc/sysctl.d/99-kubernetes-cri.conf
net.bridge.bridge-nf-call-iptables = 1
net.ipv4.ip_forward = 1
net.bridge.bridge-nf-call-ip6tables = 1
EOF
# 加载内核
sysctl --systemmkdir -p /etc/containerd
containerd config default | tee /etc/containerd/config.toml
修改Containerd的配置文件
sed -i "s#SystemdCgroup\ \=\ false#SystemdCgroup\ \=\ true#g" /etc/containerd/config.toml
cat /etc/containerd/config.toml | grep SystemdCgroup
sed -i "s#k8s.gcr.io#registry.cn-hangzhou.aliyuncs.com/chenby#g" /etc/containerd/config.toml
cat /etc/containerd/config.toml | grep sandbox_image
# 找到containerd.runtimes.runc.options，在其下加入SystemdCgroup = true
[plugins."io.containerd.grpc.v1.cri".containerd.runtimes.runc.options]
SystemdCgroup = true
[plugins."io.containerd.grpc.v1.cri".cni]
# 将sandbox_image默认地址改为符合版本地址
sandbox_image = "registry.cn-hangzhou.aliyuncs.com/chenby/pause:3.6"systemctl daemon-reload
systemctl enable --now containerdwget https://github.com/kubernetes-sigs/cri-tools/releases/download/v1.24.2/crictl-v1.24.2-linux-amd64.tar.gz
#解压
tar xf crictl-v1.24.2-linux-amd64.tar.gz -C /usr/bin/
#生成配置文件
cat > /etc/crictl.yaml <<EOF
runtime-endpoint: unix:///run/containerd/containerd.sock
image-endpoint: unix:///run/containerd/containerd.sock
timeout: 10
debug: false
EOF
#测试
systemctl restart containerd
crictl info
# 下载安装包
wget https://dl.k8s.io/v1.24.2/kubernetes-server-linux-amd64.tar.gz
wget https://github.com/etcd-io/etcd/releases/download/v3.5.4/etcd-v3.5.4-linux-amd64.tar.gz
# 解压k8s安装文件
cd cby
tar -xf kubernetes-server-linux-amd64.tar.gz --strip-components=3 -C /usr/local/bin kubernetes/server/bin/kube{let,ctl,-apiserver,-controller-manager,-scheduler,-proxy}
# 解压etcd安装文件
tar -xf etcd-v3.5.4-linux-amd64.tar.gz --strip-components=1 -C /usr/local/bin etcd-v3.5.4-linux-amd64/etcd{,ctl}
# 查看/usr/local/bin下内容
ls /usr/local/bin/
containerd containerd-shim-runc-v1 containerd-stress critest ctr etcdctl kube-controller-manager kubelet kube-scheduler containerd-shim containerd-shim-runc-v2 crictl ctd-decoder etcd kube-apiserver kubectl kube-proxy
[root@k8s-master01 ~]# kubelet --version
Kubernetes v1.24.2
[root@k8s-master01 ~]# etcdctl version
etcdctl version: 3.5.4
API version: 3.5
[root@k8s-master01 ~]# Master='k8s-master02 k8s-master03'
Work='k8s-node01 k8s-node02 k8s-node03 k8s-node04 k8s-node05'
for NODE in $Master; do echo $NODE; scp /usr/local/bin/kube{let,ctl,-apiserver,-controller-manager,-scheduler,-proxy} $NODE:/usr/local/bin/; scp /usr/local/bin/etcd* $NODE:/usr/local/bin/; done
for NODE in $Work; do scp /usr/local/bin/kube{let,-proxy} $NODE:/usr/local/bin/ ; done
mkdir -p /opt/cni/binmkdir pki
cd pki
cat > admin-csr.json << EOF
{
"CN": "admin",
"key": {
"algo": "rsa",
"size": 2048
},
"names": [
{
"C": "CN",
"ST": "Beijing",
"L": "Beijing",
"O": "system:masters",
"OU": "Kubernetes-manual"
}
]
}
EOF
cat > ca-config.json << EOF
{
"signing": {
"default": {
"expiry": "876000h"
},
"profiles": {
"kubernetes": {
"usages": [
"signing",
"key encipherment",
"server auth",
"client auth"
],
"expiry": "876000h"
}
}
}
}
EOF
cat > etcd-ca-csr.json << EOF
{
"CN": "etcd",
"key": {
"algo": "rsa",
"size": 2048
},
"names": [
{
"C": "CN",
"ST": "Beijing",
"L": "Beijing",
"O": "etcd",
"OU": "Etcd Security"
}
],
"ca": {
"expiry": "876000h"
}
}
EOF
cat > front-proxy-ca-csr.json << EOF
{
"CN": "kubernetes",
"key": {
"algo": "rsa",
"size": 2048
},
"ca": {
"expiry": "876000h"
}
}
EOF
cat > kubelet-csr.json << EOF
{
"CN": "system:node:\$NODE",
"key": {
"algo": "rsa",
"size": 2048
},
"names": [
{
"C": "CN",
"L": "Beijing",
"ST": "Beijing",
"O": "system:nodes",
"OU": "Kubernetes-manual"
}
]
}
EOF
cat > manager-csr.json << EOF
{
"CN": "system:kube-controller-manager",
"key": {
"algo": "rsa",
"size": 2048
},
"names": [
{
"C": "CN",
"ST": "Beijing",
"L": "Beijing",
"O": "system:kube-controller-manager",
"OU": "Kubernetes-manual"
}
]
}
EOF
cat > apiserver-csr.json << EOF
{
"CN": "kube-apiserver",
"key": {
"algo": "rsa",
"size": 2048
},
"names": [
{
"C": "CN",
"ST": "Beijing",
"L": "Beijing",
"O": "Kubernetes",
"OU": "Kubernetes-manual"
}
]
}
EOF
cat > ca-csr.json << EOF
{
"CN": "kubernetes",
"key": {
"algo": "rsa",
"size": 2048
},
"names": [
{
"C": "CN",
"ST": "Beijing",
"L": "Beijing",
"O": "Kubernetes",
"OU": "Kubernetes-manual"
}
],
"ca": {
"expiry": "876000h"
}
}
EOF
cat > etcd-csr.json << EOF
{
"CN": "etcd",
"key": {
"algo": "rsa",
"size": 2048
},
"names": [
{
"C": "CN",
"ST": "Beijing",
"L": "Beijing",
"O": "etcd",
"OU": "Etcd Security"
}
]
}
EOF
cat > front-proxy-client-csr.json << EOF
{
"CN": "front-proxy-client",
"key": {
"algo": "rsa",
"size": 2048
}
}
EOF
cat > kube-proxy-csr.json << EOF
{
"CN": "system:kube-proxy",
"key": {
"algo": "rsa",
"size": 2048
},
"names": [
{
"C": "CN",
"ST": "Beijing",
"L": "Beijing",
"O": "system:kube-proxy",
"OU": "Kubernetes-manual"
}
]
}
EOF
cat > scheduler-csr.json << EOF
{
"CN": "system:kube-scheduler",
"key": {
"algo": "rsa",
"size": 2048
},
"names": [
{
"C": "CN",
"ST": "Beijing",
"L": "Beijing",
"O": "system:kube-scheduler",
"OU": "Kubernetes-manual"
}
]
}
EOF
cd ..
mkdir bootstrap
cd bootstrap
cat > bootstrap.secret.yaml << EOF
apiVersion: v1
kind: Secret
metadata:
name: bootstrap-token-c8ad9c
namespace: kube-system
type: bootstrap.kubernetes.io/token
stringData:
description: "The default bootstrap token generated by 'kubelet '."
token-id: c8ad9c
token-secret: 2e4d610cf3e7426e
usage-bootstrap-authentication: "true"
usage-bootstrap-signing: "true"
auth-extra-groups: system:bootstrappers:default-node-token,system:bootstrappers:worker,system:bootstrappers:ingress
---
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRoleBinding
metadata:
name: kubelet-bootstrap
roleRef:
apiGroup: rbac.authorization.k8s.io
kind: ClusterRole
name: system:node-bootstrapper
subjects:
- apiGroup: rbac.authorization.k8s.io
kind: Group
name: system:bootstrappers:default-node-token
---
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRoleBinding
metadata:
name: node-autoapprove-bootstrap
roleRef:
apiGroup: rbac.authorization.k8s.io
kind: ClusterRole
name: system:certificates.k8s.io:certificatesigningrequests:nodeclient
subjects:
- apiGroup: rbac.authorization.k8s.io
kind: Group
name: system:bootstrappers:default-node-token
---
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRoleBinding
metadata:
name: node-autoapprove-certificate-rotation
roleRef:
apiGroup: rbac.authorization.k8s.io
kind: ClusterRole
name: system:certificates.k8s.io:certificatesigningrequests:selfnodeclient
subjects:
- apiGroup: rbac.authorization.k8s.io
kind: Group
name: system:nodes
---
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRole
metadata:
annotations:
rbac.authorization.kubernetes.io/autoupdate: "true"
labels:
kubernetes.io/bootstrapping: rbac-defaults
name: system:kube-apiserver-to-kubelet
rules:
- apiGroups:
- ""
resources:
- nodes/proxy
- nodes/stats
- nodes/log
- nodes/spec
- nodes/metrics
verbs:
- "*"
---
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRoleBinding
metadata:
name: system:kube-apiserver
namespace: ""
roleRef:
apiGroup: rbac.authorization.k8s.io
kind: ClusterRole
name: system:kube-apiserver-to-kubelet
subjects:
- apiGroup: rbac.authorization.k8s.io
kind: User
name: kube-apiserver
EOF
cd ..
mkdir coredns
cd coredns
cat > coredns.yaml << EOF
apiVersion: v1
kind: ServiceAccount
metadata:
name: coredns
namespace: kube-system
---
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRole
metadata:
labels:
kubernetes.io/bootstrapping: rbac-defaults
name: system:coredns
rules:
- apiGroups:
- ""
resources:
- endpoints
- services
- pods
- namespaces
verbs:
- list
- watch
- apiGroups:
- discovery.k8s.io
resources:
- endpointslices
verbs:
- list
- watch
---
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRoleBinding
metadata:
annotations:
rbac.authorization.kubernetes.io/autoupdate: "true"
labels:
kubernetes.io/bootstrapping: rbac-defaults
name: system:coredns
roleRef:
apiGroup: rbac.authorization.k8s.io
kind: ClusterRole
name: system:coredns
subjects:
- kind: ServiceAccount
name: coredns
namespace: kube-system
---
apiVersion: v1
kind: ConfigMap
metadata:
name: coredns
namespace: kube-system
data:
Corefile: |
.:53 {
errors
health {
lameduck 5s
}
ready
kubernetes cluster.local in-addr.arpa ip6.arpa {
fallthrough in-addr.arpa ip6.arpa
}
prometheus :9153
forward . /etc/resolv.conf {
max_concurrent 1000
}
cache 30
loop
reload
loadbalance
}
---
apiVersion: apps/v1
kind: Deployment
metadata:
name: coredns
namespace: kube-system
labels:
k8s-app: kube-dns
kubernetes.io/name: "CoreDNS"
spec:
# replicas: not specified here:
# 1. Default is 1.
# 2. Will be tuned in real time if DNS horizontal auto-scaling is turned on.
strategy:
type: RollingUpdate
rollingUpdate:
maxUnavailable: 1
selector:
matchLabels:
k8s-app: kube-dns
template:
metadata:
labels:
k8s-app: kube-dns
spec:
priorityClassName: system-cluster-critical
serviceAccountName: coredns
tolerations:
- key: "CriticalAddonsOnly"
operator: "Exists"
nodeSelector:
kubernetes.io/os: linux
affinity:
podAntiAffinity:
preferredDuringSchedulingIgnoredDuringExecution:
- weight: 100
podAffinityTerm:
labelSelector:
matchExpressions:
- key: k8s-app
operator: In
values: ["kube-dns"]
topologyKey: kubernetes.io/hostname
containers:
- name: coredns
image: registry.cn-beijing.aliyuncs.com/dotbalo/coredns:1.8.6
imagePullPolicy: IfNotPresent
resources:
limits:
memory: 170Mi
requests:
cpu: 100m
memory: 70Mi
args: [ "-conf", "/etc/coredns/Corefile" ]
volumeMounts:
- name: config-volume
mountPath: /etc/coredns
readOnly: true
ports:
- containerPort: 53
name: dns
protocol: UDP
- containerPort: 53
name: dns-tcp
protocol: TCP
- containerPort: 9153
name: metrics
protocol: TCP
securityContext:
allowPrivilegeEscalation: false
capabilities:
add:
- NET_BIND_SERVICE
drop:
- all
readOnlyRootFilesystem: true
livenessProbe:
httpGet:
path: /health
port: 8080
scheme: HTTP
initialDelaySeconds: 60
timeoutSeconds: 5
successThreshold: 1
failureThreshold: 5
readinessProbe:
httpGet:
path: /ready
port: 8181
scheme: HTTP
dnsPolicy: Default
volumes:
- name: config-volume
configMap:
name: coredns
items:
- key: Corefile
path: Corefile
---
apiVersion: v1
kind: Service
metadata:
name: kube-dns
namespace: kube-system
annotations:
prometheus.io/port: "9153"
prometheus.io/scrape: "true"
labels:
k8s-app: kube-dns
kubernetes.io/cluster-service: "true"
kubernetes.io/name: "CoreDNS"
spec:
selector:
k8s-app: kube-dns
clusterIP: 10.96.0.10
ports:
- name: dns
port: 53
protocol: UDP
- name: dns-tcp
port: 53
protocol: TCP
- name: metrics
port: 9153
protocol: TCP
EOF
cd ..
mkdir metrics-server
cd metrics-server
cat > metrics-server.yaml << EOF
apiVersion: v1
kind: ServiceAccount
metadata:
labels:
k8s-app: metrics-server
name: metrics-server
namespace: kube-system
---
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRole
metadata:
labels:
k8s-app: metrics-server
rbac.authorization.k8s.io/aggregate-to-admin: "true"
rbac.authorization.k8s.io/aggregate-to-edit: "true"
rbac.authorization.k8s.io/aggregate-to-view: "true"
name: system:aggregated-metrics-reader
rules:
- apiGroups:
- metrics.k8s.io
resources:
- pods
- nodes
verbs:
- get
- list
- watch
---
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRole
metadata:
labels:
k8s-app: metrics-server
name: system:metrics-server
rules:
- apiGroups:
- ""
resources:
- pods
- nodes
- nodes/stats
- namespaces
- configmaps
verbs:
- get
- list
- watch
---
apiVersion: rbac.authorization.k8s.io/v1
kind: RoleBinding
metadata:
labels:
k8s-app: metrics-server
name: metrics-server-auth-reader
namespace: kube-system
roleRef:
apiGroup: rbac.authorization.k8s.io
kind: Role
name: extension-apiserver-authentication-reader
subjects:
- kind: ServiceAccount
name: metrics-server
namespace: kube-system
---
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRoleBinding
metadata:
labels:
k8s-app: metrics-server
name: metrics-server:system:auth-delegator
roleRef:
apiGroup: rbac.authorization.k8s.io
kind: ClusterRole
name: system:auth-delegator
subjects:
- kind: ServiceAccount
name: metrics-server
namespace: kube-system
---
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRoleBinding
metadata:
labels:
k8s-app: metrics-server
name: system:metrics-server
roleRef:
apiGroup: rbac.authorization.k8s.io
kind: ClusterRole
name: system:metrics-server
subjects:
- kind: ServiceAccount
name: metrics-server
namespace: kube-system
---
apiVersion: v1
kind: Service
metadata:
labels:
k8s-app: metrics-server
name: metrics-server
namespace: kube-system
spec:
ports:
- name: https
port: 443
protocol: TCP
targetPort: https
selector:
k8s-app: metrics-server
---
apiVersion: apps/v1
kind: Deployment
metadata:
labels:
k8s-app: metrics-server
name: metrics-server
namespace: kube-system
spec:
selector:
matchLabels:
k8s-app: metrics-server
strategy:
rollingUpdate:
maxUnavailable: 0
template:
metadata:
labels:
k8s-app: metrics-server
spec:
containers:
- args:
- --cert-dir=/tmp
- --secure-port=4443
- --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname
- --kubelet-use-node-status-port
- --metric-resolution=15s
- --kubelet-insecure-tls
- --requestheader-client-ca-file=/etc/kubernetes/pki/front-proxy-ca.pem # change to front-proxy-ca.crt for kubeadm
- --requestheader-username-headers=X-Remote-User
- --requestheader-group-headers=X-Remote-Group
- --requestheader-extra-headers-prefix=X-Remote-Extra-
image: registry.cn-beijing.aliyuncs.com/dotbalo/metrics-server:0.5.0
imagePullPolicy: IfNotPresent
livenessProbe:
failureThreshold: 3
httpGet:
path: /livez
port: https
scheme: HTTPS
periodSeconds: 10
name: metrics-server
ports:
- containerPort: 4443
name: https
protocol: TCP
readinessProbe:
failureThreshold: 3
httpGet:
path: /readyz
port: https
scheme: HTTPS
initialDelaySeconds: 20
periodSeconds: 10
resources:
requests:
cpu: 100m
memory: 200Mi
securityContext:
readOnlyRootFilesystem: true
runAsNonRoot: true
runAsUser: 1000
volumeMounts:
- mountPath: /tmp
name: tmp-dir
- name: ca-ssl
mountPath: /etc/kubernetes/pki
nodeSelector:
kubernetes.io/os: linux
priorityClassName: system-cluster-critical
serviceAccountName: metrics-server
volumes:
- emptyDir: {}
name: tmp-dir
- name: ca-ssl
hostPath:
path: /etc/kubernetes/pki
---
apiVersion: apiregistration.k8s.io/v1
kind: APIService
metadata:
labels:
k8s-app: metrics-server
name: v1beta1.metrics.k8s.io
spec:
group: metrics.k8s.io
groupPriorityMinimum: 100
insecureSkipTLSVerify: true
service:
name: metrics-server
namespace: kube-system
version: v1beta1
versionPriority: 100
EOF# master01节点下载证书生成工具
# wget "https://github.com/cloudflare/cfssl/releases/download/v1.6.1/cfssl_1.6.1_linux_amd64" -O /usr/local/bin/cfssl
# wget "https://github.com/cloudflare/cfssl/releases/download/v1.6.1/cfssljson_1.6.1_linux_amd64" -O /usr/local/bin/cfssljson
# 软件包内有
cp cfssl_1.6.1_linux_amd64 /usr/local/bin/cfssl
cp cfssljson_1.6.1_linux_amd64 /usr/local/bin/cfssljson
chmod +x /usr/local/bin/cfssl /usr/local/bin/cfssljson
特别说明除外，以下操作在所有master节点操作
mkdir /etc/etcd/ssl -pcd pki
# 生成etcd证书和etcd证书的key（如果你觉得以后可能会扩容，可以在ip那多写几个预留出来）
cfssl gencert -initca etcd-ca-csr.json | cfssljson -bare /etc/etcd/ssl/etcd-ca
cfssl gencert \
-ca=/etc/etcd/ssl/etcd-ca.pem \
-ca-key=/etc/etcd/ssl/etcd-ca-key.pem \
-config=ca-config.json \
-hostname=127.0.0.1,k8s-master01,k8s-master02,k8s-master03,10.0.0.61,10.0.0.62,10.0.0.63,2408:8207:78cc:5cc1:181c::10,2408:8207:78cc:5cc1:181c::20,2408:8207:78cc:5cc1:181c::30 \
-profile=kubernetes \
etcd-csr.json | cfssljson -bare /etc/etcd/ssl/etcdMaster='k8s-master02 k8s-master03'
for NODE in $Master; do ssh $NODE "mkdir -p /etc/etcd/ssl"; for FILE in etcd-ca-key.pem etcd-ca.pem etcd-key.pem etcd.pem; do scp /etc/etcd/ssl/${FILE} $NODE:/etc/etcd/ssl/${FILE}; done; done特别说明除外，以下操作在所有master节点操作
mkdir -p /etc/kubernetes/pkicfssl gencert -initca ca-csr.json | cfssljson -bare /etc/kubernetes/pki/ca
# 生成一个根证书 ，多写了一些IP作为预留IP，为将来添加node做准备
# 10.96.0.1是service网段的第一个地址，需要计算，10.0.0.69为高可用vip地址
cfssl gencert \
-ca=/etc/kubernetes/pki/ca.pem \
-ca-key=/etc/kubernetes/pki/ca-key.pem \
-config=ca-config.json \
-hostname=10.96.0.1,10.0.0.69,127.0.0.1,kubernetes,kubernetes.default,kubernetes.default.svc,kubernetes.default.svc.cluster,kubernetes.default.svc.cluster.local,x.oiox.cn,k.oiox.cn,l.oiox.cn,o.oiox.cn,10.0.0.61,10.0.0.62,10.0.0.63,10.0.0.64,10.0.0.65,10.0.0.66,10.0.0.67,10.0.0.68,10.0.0.80,10.0.0.80,10.0.0.40,10.0.0.41,2408:8207:78cc:5cc1:181c::10,2408:8207:78cc:5cc1:181c::20,2408:8207:78cc:5cc1:181c::30,2408:8207:78cc:5cc1:181c::40,2408:8207:78cc:5cc1:181c::50,2408:8207:78cc:5cc1:181c::60,2408:8207:78cc:5cc1:181c::70,2408:8207:78cc:5cc1:181c::80,2408:8207:78cc:5cc1:181c::90,2408:8207:78cc:5cc1:181c::100 \
-profile=kubernetes apiserver-csr.json | cfssljson -bare /etc/kubernetes/pki/apiservercfssl gencert -initca front-proxy-ca-csr.json | cfssljson -bare /etc/kubernetes/pki/front-proxy-ca
# 有一个警告，可以忽略
cfssl gencert \
-ca=/etc/kubernetes/pki/front-proxy-ca.pem \
-ca-key=/etc/kubernetes/pki/front-proxy-ca-key.pem \
-config=ca-config.json \
-profile=kubernetes front-proxy-client-csr.json | cfssljson -bare /etc/kubernetes/pki/front-proxy-clientcfssl gencert \
-ca=/etc/kubernetes/pki/ca.pem \
-ca-key=/etc/kubernetes/pki/ca-key.pem \
-config=ca-config.json \
-profile=kubernetes \
manager-csr.json | cfssljson -bare /etc/kubernetes/pki/controller-manager
# 设置一个集群项
kubectl config set-cluster kubernetes \
--certificate-authority=/etc/kubernetes/pki/ca.pem \
--embed-certs=true \
--server=https://10.0.0.69:8443 \
--kubeconfig=/etc/kubernetes/controller-manager.kubeconfig
# 设置一个环境项，一个上下文
kubectl config set-context system:kube-controller-manager@kubernetes \
--cluster=kubernetes \
--user=system:kube-controller-manager \
--kubeconfig=/etc/kubernetes/controller-manager.kubeconfig
# 设置一个用户项
kubectl config set-credentials system:kube-controller-manager \
--client-certificate=/etc/kubernetes/pki/controller-manager.pem \
--client-key=/etc/kubernetes/pki/controller-manager-key.pem \
--embed-certs=true \
--kubeconfig=/etc/kubernetes/controller-manager.kubeconfig
# 设置默认环境
kubectl config use-context system:kube-controller-manager@kubernetes \
--kubeconfig=/etc/kubernetes/controller-manager.kubeconfig
cfssl gencert \
-ca=/etc/kubernetes/pki/ca.pem \
-ca-key=/etc/kubernetes/pki/ca-key.pem \
-config=ca-config.json \
-profile=kubernetes \
scheduler-csr.json | cfssljson -bare /etc/kubernetes/pki/scheduler
kubectl config set-cluster kubernetes \
--certificate-authority=/etc/kubernetes/pki/ca.pem \
--embed-certs=true \
--server=https://10.0.0.69:8443 \
--kubeconfig=/etc/kubernetes/scheduler.kubeconfig
kubectl config set-credentials system:kube-scheduler \
--client-certificate=/etc/kubernetes/pki/scheduler.pem \
--client-key=/etc/kubernetes/pki/scheduler-key.pem \
--embed-certs=true \
--kubeconfig=/etc/kubernetes/scheduler.kubeconfig
kubectl config set-context system:kube-scheduler@kubernetes \
--cluster=kubernetes \
--user=system:kube-scheduler \
--kubeconfig=/etc/kubernetes/scheduler.kubeconfig
kubectl config use-context system:kube-scheduler@kubernetes \
--kubeconfig=/etc/kubernetes/scheduler.kubeconfig
cfssl gencert \
-ca=/etc/kubernetes/pki/ca.pem \
-ca-key=/etc/kubernetes/pki/ca-key.pem \
-config=ca-config.json \
-profile=kubernetes \
admin-csr.json | cfssljson -bare /etc/kubernetes/pki/admin
kubectl config set-cluster kubernetes \
--certificate-authority=/etc/kubernetes/pki/ca.pem \
--embed-certs=true \
--server=https://10.0.0.69:8443 \
--kubeconfig=/etc/kubernetes/admin.kubeconfig
kubectl config set-credentials kubernetes-admin \
--client-certificate=/etc/kubernetes/pki/admin.pem \
--client-key=/etc/kubernetes/pki/admin-key.pem \
--embed-certs=true \
--kubeconfig=/etc/kubernetes/admin.kubeconfig
kubectl config set-context kubernetes-admin@kubernetes \
--cluster=kubernetes \
--user=kubernetes-admin \
--kubeconfig=/etc/kubernetes/admin.kubeconfig
kubectl config use-context kubernetes-admin@kubernetes --kubeconfig=/etc/kubernetes/admin.kubeconfigcfssl gencert \
-ca=/etc/kubernetes/pki/ca.pem \
-ca-key=/etc/kubernetes/pki/ca-key.pem \
-config=ca-config.json \
-profile=kubernetes \
kube-proxy-csr.json | cfssljson -bare /etc/kubernetes/pki/kube-proxy
kubectl config set-cluster kubernetes \
--certificate-authority=/etc/kubernetes/pki/ca.pem \
--embed-certs=true \
--server=https://10.0.0.69:8443 \
--kubeconfig=/etc/kubernetes/kube-proxy.kubeconfig
kubectl config set-credentials kube-proxy \
--client-certificate=/etc/kubernetes/pki/kube-proxy.pem \
--client-key=/etc/kubernetes/pki/kube-proxy-key.pem \
--embed-certs=true \
--kubeconfig=/etc/kubernetes/kube-proxy.kubeconfig
kubectl config set-context kube-proxy@kubernetes \
--cluster=kubernetes \
--user=kube-proxy \
--kubeconfig=/etc/kubernetes/kube-proxy.kubeconfig
kubectl config use-context kube-proxy@kubernetes --kubeconfig=/etc/kubernetes/kube-proxy.kubeconfigopenssl genrsa -out /etc/kubernetes/pki/sa.key 2048
openssl rsa -in /etc/kubernetes/pki/sa.key -pubout -out /etc/kubernetes/pki/sa.pub#其他节点创建目录
# mkdir /etc/kubernetes/pki/ -p
for NODE in k8s-master02 k8s-master03; do for FILE in $(ls /etc/kubernetes/pki | grep -v etcd); do scp /etc/kubernetes/pki/${FILE} $NODE:/etc/kubernetes/pki/${FILE}; done; for FILE in admin.kubeconfig controller-manager.kubeconfig scheduler.kubeconfig; do scp /etc/kubernetes/${FILE} $NODE:/etc/kubernetes/${FILE}; done; donels /etc/kubernetes/pki/
admin.csr ca.csr front-proxy-ca.csr kube-proxy.csr scheduler-key.pem
admin-key.pem ca-key.pem front-proxy-ca-key.pem kube-proxy-key.pem scheduler.pem
admin.pem ca.pem front-proxy-ca.pem kube-proxy.pem
apiserver.csr controller-manager.csr front-proxy-client.csr sa.key
apiserver-key.pem controller-manager-key.pem front-proxy-client-key.pem sa.pub
apiserver.pem controller-manager.pem front-proxy-client.pem scheduler.csr
# 一共26个就对了
ls /etc/kubernetes/pki/ |wc -l
26# 如果要用IPv6那么把IPv4地址修改为IPv6即可
cat > /etc/etcd/etcd.config.yml << EOF
name: 'k8s-master01'
data-dir: /var/lib/etcd
wal-dir: /var/lib/etcd/wal
snapshot-count: 5000
heartbeat-interval: 100
election-timeout: 1000
quota-backend-bytes: 0
listen-peer-urls: 'https://10.0.0.61:2380'
listen-client-urls: 'https://10.0.0.61:2379,http://127.0.0.1:2379'
max-snapshots: 3
max-wals: 5
cors:
initial-advertise-peer-urls: 'https://10.0.0.61:2380'
advertise-client-urls: 'https://10.0.0.61:2379'
discovery:
discovery-fallback: 'proxy'
discovery-proxy:
discovery-srv:
initial-cluster: 'k8s-master01=https://10.0.0.61:2380,k8s-master02=https://10.0.0.62:2380,k8s-master03=https://10.0.0.63:2380'
initial-cluster-token: 'etcd-k8s-cluster'
initial-cluster-state: 'new'
strict-reconfig-check: false
enable-v2: true
enable-pprof: true
proxy: 'off'
proxy-failure-wait: 5000
proxy-refresh-interval: 30000
proxy-dial-timeout: 1000
proxy-write-timeout: 5000
proxy-read-timeout: 0
client-transport-security:
cert-file: '/etc/kubernetes/pki/etcd/etcd.pem'
key-file: '/etc/kubernetes/pki/etcd/etcd-key.pem'
client-cert-auth: true
trusted-ca-file: '/etc/kubernetes/pki/etcd/etcd-ca.pem'
auto-tls: true
peer-transport-security:
cert-file: '/etc/kubernetes/pki/etcd/etcd.pem'
key-file: '/etc/kubernetes/pki/etcd/etcd-key.pem'
peer-client-cert-auth: true
trusted-ca-file: '/etc/kubernetes/pki/etcd/etcd-ca.pem'
auto-tls: true
debug: false
log-package-levels:
log-outputs: [default]
force-new-cluster: false
EOF# 如果要用IPv6那么把IPv4地址修改为IPv6即可
cat > /etc/etcd/etcd.config.yml << EOF
name: 'k8s-master02'
data-dir: /var/lib/etcd
wal-dir: /var/lib/etcd/wal
snapshot-count: 5000
heartbeat-interval: 100
election-timeout: 1000
quota-backend-bytes: 0
listen-peer-urls: 'https://10.0.0.62:2380'
listen-client-urls: 'https://10.0.0.62:2379,http://127.0.0.1:2379'
max-snapshots: 3
max-wals: 5
cors:
initial-advertise-peer-urls: 'https://10.0.0.62:2380'
advertise-client-urls: 'https://10.0.0.62:2379'
discovery:
discovery-fallback: 'proxy'
discovery-proxy:
discovery-srv:
initial-cluster: 'k8s-master01=https://10.0.0.61:2380,k8s-master02=https://10.0.0.62:2380,k8s-master03=https://10.0.0.63:2380'
initial-cluster-token: 'etcd-k8s-cluster'
initial-cluster-state: 'new'
strict-reconfig-check: false
enable-v2: true
enable-pprof: true
proxy: 'off'
proxy-failure-wait: 5000
proxy-refresh-interval: 30000
proxy-dial-timeout: 1000
proxy-write-timeout: 5000
proxy-read-timeout: 0
client-transport-security:
cert-file: '/etc/kubernetes/pki/etcd/etcd.pem'
key-file: '/etc/kubernetes/pki/etcd/etcd-key.pem'
client-cert-auth: true
trusted-ca-file: '/etc/kubernetes/pki/etcd/etcd-ca.pem'
auto-tls: true
peer-transport-security:
cert-file: '/etc/kubernetes/pki/etcd/etcd.pem'
key-file: '/etc/kubernetes/pki/etcd/etcd-key.pem'
peer-client-cert-auth: true
trusted-ca-file: '/etc/kubernetes/pki/etcd/etcd-ca.pem'
auto-tls: true
debug: false
log-package-levels:
log-outputs: [default]
force-new-cluster: false
EOF# 如果要用IPv6那么把IPv4地址修改为IPv6即可
cat > /etc/etcd/etcd.config.yml << EOF
name: 'k8s-master03'
data-dir: /var/lib/etcd
wal-dir: /var/lib/etcd/wal
snapshot-count: 5000
heartbeat-interval: 100
election-timeout: 1000
quota-backend-bytes: 0
listen-peer-urls: 'https://10.0.0.63:2380'
listen-client-urls: 'https://10.0.0.63:2379,http://127.0.0.1:2379'
max-snapshots: 3
max-wals: 5
cors:
initial-advertise-peer-urls: 'https://10.0.0.63:2380'
advertise-client-urls: 'https://10.0.0.63:2379'
discovery:
discovery-fallback: 'proxy'
discovery-proxy:
discovery-srv:
initial-cluster: 'k8s-master01=https://10.0.0.61:2380,k8s-master02=https://10.0.0.62:2380,k8s-master03=https://10.0.0.63:2380'
initial-cluster-token: 'etcd-k8s-cluster'
initial-cluster-state: 'new'
strict-reconfig-check: false
enable-v2: true
enable-pprof: true
proxy: 'off'
proxy-failure-wait: 5000
proxy-refresh-interval: 30000
proxy-dial-timeout: 1000
proxy-write-timeout: 5000
proxy-read-timeout: 0
client-transport-security:
cert-file: '/etc/kubernetes/pki/etcd/etcd.pem'
key-file: '/etc/kubernetes/pki/etcd/etcd-key.pem'
client-cert-auth: true
trusted-ca-file: '/etc/kubernetes/pki/etcd/etcd-ca.pem'
auto-tls: true
peer-transport-security:
cert-file: '/etc/kubernetes/pki/etcd/etcd.pem'
key-file: '/etc/kubernetes/pki/etcd/etcd-key.pem'
peer-client-cert-auth: true
trusted-ca-file: '/etc/kubernetes/pki/etcd/etcd-ca.pem'
auto-tls: true
debug: false
log-package-levels:
log-outputs: [default]
force-new-cluster: false
EOFcat > /usr/lib/systemd/system/etcd.service << EOF
[Unit]
Description=Etcd Service
Documentation=https://coreos.com/etcd/docs/latest/
After=network.target
[Service]
Type=notify
ExecStart=/usr/local/bin/etcd --config-file=/etc/etcd/etcd.config.yml
Restart=on-failure
RestartSec=10
LimitNOFILE=65536
[Install]
WantedBy=multi-user.target
Alias=etcd3.service
EOFmkdir /etc/kubernetes/pki/etcd
ln -s /etc/etcd/ssl/* /etc/kubernetes/pki/etcd/
systemctl daemon-reload
systemctl enable --now etcd# 如果要用IPv6那么把IPv4地址修改为IPv6即可
export ETCDCTL_API=3
etcdctl --endpoints="10.0.0.63:2379,10.0.0.62:2379,10.0.0.61:2379" --cacert=/etc/kubernetes/pki/etcd/etcd-ca.pem --cert=/etc/kubernetes/pki/etcd/etcd.pem --key=/etc/kubernetes/pki/etcd/etcd-key.pem endpoint status --write-out=table
+----------------+------------------+---------+---------+-----------+------------+-----------+------------+--------------------+--------+
| ENDPOINT | ID | VERSION | DB SIZE | IS LEADER | IS LEARNER | RAFT TERM | RAFT INDEX | RAFT APPLIED INDEX | ERRORS |
+----------------+------------------+---------+---------+-----------+------------+-----------+------------+--------------------+--------+
| 10.0.0.63:2379 | c0c8142615b9523f | 3.5.4 | 20 kB | false | false | 2 | 9 | 9 | |
| 10.0.0.62:2379 | de8396604d2c160d | 3.5.4 | 20 kB | false | false | 2 | 9 | 9 | |
| 10.0.0.61:2379 | 33c9d6df0037ab97 | 3.5.4 | 20 kB | true | false | 2 | 9 | 9 | |
+----------------+------------------+---------+---------+-----------+------------+-----------+------------+--------------------+--------+
[root@k8s-master01 pki]# systemctl disable --now firewalld
setenforce 0
sed -i 's#SELINUX=enforcing#SELINUX=disabled#g' /etc/selinux/config
yum -y install keepalived haproxy# cp /etc/haproxy/haproxy.cfg /etc/haproxy/haproxy.cfg.bak
cat >/etc/haproxy/haproxy.cfg<<"EOF"
global
maxconn 2000
ulimit-n 16384
log 127.0.0.1 local0 err
stats timeout 30s
defaults
log global
mode http
option httplog
timeout connect 5000
timeout client 50000
timeout server 50000
timeout http-request 15s
timeout http-keep-alive 15s
frontend monitor-in
bind *:33305
mode http
option httplog
monitor-uri /monitor
frontend k8s-master
bind 0.0.0.0:8443
bind 127.0.0.1:8443
mode tcp
option tcplog
tcp-request inspect-delay 5s
default_backend k8s-master
backend k8s-master
mode tcp
option tcplog
option tcp-check
balance roundrobin
default-server inter 10s downinter 5s rise 2 fall 2 slowstart 60s maxconn 250 maxqueue 256 weight 100
server k8s-master01 10.0.0.61:6443 check
server k8s-master02 10.0.0.62:6443 check
server k8s-master03 10.0.0.63:6443 check
EOF#cp /etc/keepalived/keepalived.conf /etc/keepalived/keepalived.conf.bak
cat > /etc/keepalived/keepalived.conf << EOF
! Configuration File for keepalived
global_defs {
router_id LVS_DEVEL
}
vrrp_script chk_apiserver {
script "/etc/keepalived/check_apiserver.sh"
interval 5
weight -5
fall 2
rise 1
}
vrrp_instance VI_1 {
state MASTER
# 注意网卡名
interface ens160
mcast_src_ip 10.0.0.70
virtual_router_id 51
priority 100
nopreempt
advert_int 2
authentication {
auth_type PASS
auth_pass K8SHA_KA_AUTH
}
virtual_ipaddress {
10.0.0.69
}
track_script {
chk_apiserver
} }
EOF# cp /etc/keepalived/keepalived.conf /etc/keepalived/keepalived.conf.bak
cat > /etc/keepalived/keepalived.conf << EOF
! Configuration File for keepalived
global_defs {
router_id LVS_DEVEL
}
vrrp_script chk_apiserver {
script "/etc/keepalived/check_apiserver.sh"
interval 5
weight -5
fall 2
rise 1
}
vrrp_instance VI_1 {
state BACKUP
# 注意网卡名
interface ens160
mcast_src_ip 10.0.0.80
virtual_router_id 51
priority 50
nopreempt
advert_int 2
authentication {
auth_type PASS
auth_pass K8SHA_KA_AUTH
}
virtual_ipaddress {
10.0.0.69
}
track_script {
chk_apiserver
} }
EOFcat > /etc/keepalived/check_apiserver.sh << EOF
#!/bin/bash
err=0
for k in \$(seq 1 3)
do
check_code=\$(pgrep haproxy)
if [[ \$check_code == "" ]]; then
err=\$(expr \$err + 1)
sleep 1
continue
else
err=0
break
fi
done
if [[ \$err != "0" ]]; then
echo "systemctl stop keepalived"
/usr/bin/systemctl stop keepalived
exit 1
else
exit 0
fi
EOF
# 给脚本授权
chmod +x /etc/keepalived/check_apiserver.shsystemctl daemon-reload
systemctl enable --now haproxy
systemctl enable --now keepalived# 能ping同
[root@k8s-node02 ~]# ping 10.0.0.69
# 能telnet访问
[root@k8s-node02 ~]# telnet 10.0.0.69 8443
# 关闭主节点，看vip是否漂移到备节点所有k8s节点创建以下目录
mkdir -p /etc/kubernetes/manifests/ /etc/systemd/system/kubelet.service.d /var/lib/kubelet /var/log/kubernetescat > /usr/lib/systemd/system/kube-apiserver.service << EOF
[Unit]
Description=Kubernetes API Server
Documentation=https://github.com/kubernetes/kubernetes
After=network.target
[Service]
ExecStart=/usr/local/bin/kube-apiserver \\
--v=2 \\
--logtostderr=true \\
--allow-privileged=true \\
--bind-address=0.0.0.0 \\
--secure-port=6443 \\
--advertise-address=10.0.0.61 \\
--service-cluster-ip-range=10.96.0.0/12,fd00:1111::/112 \\
--feature-gates=IPv6DualStack=true \\
--service-node-port-range=30000-32767 \\
--etcd-servers=https://10.0.0.61:2379,https://10.0.0.62:2379,https://10.0.0.63:2379 \\
--etcd-cafile=/etc/etcd/ssl/etcd-ca.pem \\
--etcd-certfile=/etc/etcd/ssl/etcd.pem \\
--etcd-keyfile=/etc/etcd/ssl/etcd-key.pem \\
--client-ca-file=/etc/kubernetes/pki/ca.pem \\
--tls-cert-file=/etc/kubernetes/pki/apiserver.pem \\
--tls-private-key-file=/etc/kubernetes/pki/apiserver-key.pem \\
--kubelet-client-certificate=/etc/kubernetes/pki/apiserver.pem \\
--kubelet-client-key=/etc/kubernetes/pki/apiserver-key.pem \\
--service-account-key-file=/etc/kubernetes/pki/sa.pub \\
--service-account-signing-key-file=/etc/kubernetes/pki/sa.key \\
--service-account-issuer=https://kubernetes.default.svc.cluster.local \\
--kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname \\
--enable-admission-plugins=NamespaceLifecycle,LimitRanger,ServiceAccount,DefaultStorageClass,DefaultTolerationSeconds,NodeRestriction,ResourceQuota \
--authorization-mode=Node,RBAC \\
--enable-bootstrap-token-auth=true \\
--requestheader-client-ca-file=/etc/kubernetes/pki/front-proxy-ca.pem \\
--proxy-client-cert-file=/etc/kubernetes/pki/front-proxy-client.pem \\
--proxy-client-key-file=/etc/kubernetes/pki/front-proxy-client-key.pem \\
--requestheader-allowed-names=aggregator \\
--requestheader-group-headers=X-Remote-Group \\
--requestheader-extra-headers-prefix=X-Remote-Extra- \\
--requestheader-username-headers=X-Remote-User \\
--enable-aggregator-routing=true
# --token-auth-file=/etc/kubernetes/token.csv
Restart=on-failure
RestartSec=10s
LimitNOFILE=65535
[Install]
WantedBy=multi-user.target
EOFcat > /usr/lib/systemd/system/kube-apiserver.service << EOF
[Unit]
Description=Kubernetes API Server
Documentation=https://github.com/kubernetes/kubernetes
After=network.target
[Service]
ExecStart=/usr/local/bin/kube-apiserver \\
--v=2 \\
--logtostderr=true \\
--allow-privileged=true \\
--bind-address=0.0.0.0 \\
--secure-port=6443 \\
--advertise-address=10.0.0.62 \\
--service-cluster-ip-range=10.96.0.0/12,fd00:1111::/112 \\
--feature-gates=IPv6DualStack=true \\
--service-node-port-range=30000-32767 \\
--etcd-servers=https://10.0.0.61:2379,https://10.0.0.62:2379,https://10.0.0.63:2379 \\
--etcd-cafile=/etc/etcd/ssl/etcd-ca.pem \\
--etcd-certfile=/etc/etcd/ssl/etcd.pem \\
--etcd-keyfile=/etc/etcd/ssl/etcd-key.pem \\
--client-ca-file=/etc/kubernetes/pki/ca.pem \\
--tls-cert-file=/etc/kubernetes/pki/apiserver.pem \\
--tls-private-key-file=/etc/kubernetes/pki/apiserver-key.pem \\
--kubelet-client-certificate=/etc/kubernetes/pki/apiserver.pem \\
--kubelet-client-key=/etc/kubernetes/pki/apiserver-key.pem \\
--service-account-key-file=/etc/kubernetes/pki/sa.pub \\
--service-account-signing-key-file=/etc/kubernetes/pki/sa.key \\
--service-account-issuer=https://kubernetes.default.svc.cluster.local \\
--kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname \\
--enable-admission-plugins=NamespaceLifecycle,LimitRanger,ServiceAccount,DefaultStorageClass,DefaultTolerationSeconds,NodeRestriction,ResourceQuota \\
--authorization-mode=Node,RBAC \\
--enable-bootstrap-token-auth=true \\
--requestheader-client-ca-file=/etc/kubernetes/pki/front-proxy-ca.pem \\
--proxy-client-cert-file=/etc/kubernetes/pki/front-proxy-client.pem \\
--proxy-client-key-file=/etc/kubernetes/pki/front-proxy-client-key.pem \\
--requestheader-allowed-names=aggregator \\
--requestheader-group-headers=X-Remote-Group \\
--requestheader-extra-headers-prefix=X-Remote-Extra- \\
--requestheader-username-headers=X-Remote-User \\
--enable-aggregator-routing=true
# --token-auth-file=/etc/kubernetes/token.csv
Restart=on-failure
RestartSec=10s
LimitNOFILE=65535
[Install]
WantedBy=multi-user.target
EOFcat > /usr/lib/systemd/system/kube-apiserver.service << EOF
[Unit]
Description=Kubernetes API Server
Documentation=https://github.com/kubernetes/kubernetes
After=network.target
[Service]
ExecStart=/usr/local/bin/kube-apiserver \\
--v=2 \\
--logtostderr=true \\
--allow-privileged=true \\
--bind-address=0.0.0.0 \\
--secure-port=6443 \\
--advertise-address=10.0.0.63 \\
--service-cluster-ip-range=10.96.0.0/12,fd00:1111::/112 \\
--feature-gates=IPv6DualStack=true \\
--service-node-port-range=30000-32767 \\
--etcd-servers=https://10.0.0.61:2379,https://10.0.0.62:2379,https://10.0.0.63:2379 \\
--etcd-cafile=/etc/etcd/ssl/etcd-ca.pem \\
--etcd-certfile=/etc/etcd/ssl/etcd.pem \\
--etcd-keyfile=/etc/etcd/ssl/etcd-key.pem \\
--client-ca-file=/etc/kubernetes/pki/ca.pem \\
--tls-cert-file=/etc/kubernetes/pki/apiserver.pem \\
--tls-private-key-file=/etc/kubernetes/pki/apiserver-key.pem \\
--kubelet-client-certificate=/etc/kubernetes/pki/apiserver.pem \\
--kubelet-client-key=/etc/kubernetes/pki/apiserver-key.pem \\
--service-account-key-file=/etc/kubernetes/pki/sa.pub \\
--service-account-signing-key-file=/etc/kubernetes/pki/sa.key \\
--service-account-issuer=https://kubernetes.default.svc.cluster.local \\
--kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname \\
--enable-admission-plugins=NamespaceLifecycle,LimitRanger,ServiceAccount,DefaultStorageClass,DefaultTolerationSeconds,NodeRestriction,ResourceQuota \\
--authorization-mode=Node,RBAC \\
--enable-bootstrap-token-auth=true \\
--requestheader-client-ca-file=/etc/kubernetes/pki/front-proxy-ca.pem \\
--proxy-client-cert-file=/etc/kubernetes/pki/front-proxy-client.pem \\
--proxy-client-key-file=/etc/kubernetes/pki/front-proxy-client-key.pem \\
--requestheader-allowed-names=aggregator \\
--requestheader-group-headers=X-Remote-Group \\
--requestheader-extra-headers-prefix=X-Remote-Extra- \\
--requestheader-username-headers=X-Remote-User \\
--enable-aggregator-routing=true
Restart=on-failure
RestartSec=10s
LimitNOFILE=65535
[Install]
WantedBy=multi-user.target
EOFsystemctl daemon-reload && systemctl enable --now kube-apiserver
# 注意查看状态是否启动正常
systemctl status kube-apiserver# 所有master节点配置，且配置相同
# 172.16.0.0/12为pod网段，按需求设置你自己的网段
cat > /usr/lib/systemd/system/kube-controller-manager.service << EOF
[Unit]
Description=Kubernetes Controller Manager
Documentation=https://github.com/kubernetes/kubernetes
After=network.target
[Service]
ExecStart=/usr/local/bin/kube-controller-manager \\
--v=2 \\
--logtostderr=true \\
--bind-address=127.0.0.1 \\
--root-ca-file=/etc/kubernetes/pki/ca.pem \\
--cluster-signing-cert-file=/etc/kubernetes/pki/ca.pem \\
--cluster-signing-key-file=/etc/kubernetes/pki/ca-key.pem \\
--service-account-private-key-file=/etc/kubernetes/pki/sa.key \\
--kubeconfig=/etc/kubernetes/controller-manager.kubeconfig \\
--leader-elect=true \\
--use-service-account-credentials=true \\
--node-monitor-grace-period=40s \\
--node-monitor-period=5s \\
--pod-eviction-timeout=2m0s \\
--controllers=*,bootstrapsigner,tokencleaner \\
--allocate-node-cidrs=true \\
--feature-gates=IPv6DualStack=true \\
--service-cluster-ip-range=10.96.0.0/12,fd00:1111::/112 \\
--cluster-cidr=172.16.0.0/12,fc00:2222::/112 \\
--node-cidr-mask-size-ipv4=24 \\
--node-cidr-mask-size-ipv6=120 \\
--requestheader-client-ca-file=/etc/kubernetes/pki/front-proxy-ca.pem
Restart=always
RestartSec=10s
[Install]
WantedBy=multi-user.target
EOFsystemctl daemon-reload
systemctl enable --now kube-controller-manager
systemctl status kube-controller-managercat > /usr/lib/systemd/system/kube-scheduler.service << EOF
[Unit]
Description=Kubernetes Scheduler
Documentation=https://github.com/kubernetes/kubernetes
After=network.target
[Service]
ExecStart=/usr/local/bin/kube-scheduler \\
--v=2 \\
--logtostderr=true \\
--bind-address=127.0.0.1 \\
--leader-elect=true \\
--kubeconfig=/etc/kubernetes/scheduler.kubeconfig
Restart=always
RestartSec=10s
[Install]
WantedBy=multi-user.target
EOFsystemctl daemon-reload
systemctl enable --now kube-scheduler
systemctl status kube-schedulercd bootstrap
kubectl config set-cluster kubernetes \
--certificate-authority=/etc/kubernetes/pki/ca.pem \
--embed-certs=true --server=https://10.0.0.69:8443 \
--kubeconfig=/etc/kubernetes/bootstrap-kubelet.kubeconfig
kubectl config set-credentials tls-bootstrap-token-user \
--token=c8ad9c.2e4d610cf3e7426e \
--kubeconfig=/etc/kubernetes/bootstrap-kubelet.kubeconfig
kubectl config set-context tls-bootstrap-token-user@kubernetes \
--cluster=kubernetes \
--user=tls-bootstrap-token-user \
--kubeconfig=/etc/kubernetes/bootstrap-kubelet.kubeconfig
kubectl config use-context tls-bootstrap-token-user@kubernetes \
--kubeconfig=/etc/kubernetes/bootstrap-kubelet.kubeconfig
# token的位置在bootstrap.secret.yaml，如果修改的话到这个文件修改
mkdir -p /root/.kube ; cp /etc/kubernetes/admin.kubeconfig /root/.kube/configkubectl get cs
Warning: v1 ComponentStatus is deprecated in v1.19+
NAME STATUS MESSAGE ERROR
scheduler Healthy ok
controller-manager Healthy ok
etcd-0 Healthy {"health":"true","reason":""}
etcd-2 Healthy {"health":"true","reason":""}
etcd-1 Healthy {"health":"true","reason":""}
# 切记执行，别忘记！！！
kubectl create -f bootstrap.secret.yamlcd /etc/kubernetes/
for NODE in k8s-master02 k8s-master03 k8s-node01 k8s-node02 k8s-node03 k8s-node04 k8s-node05; do ssh $NODE mkdir -p /etc/kubernetes/pki; for FILE in pki/ca.pem pki/ca-key.pem pki/front-proxy-ca.pem bootstrap-kubelet.kubeconfig kube-proxy.kubeconfig; do scp /etc/kubernetes/$FILE $NODE:/etc/kubernetes/${FILE}; done; donemkdir -p /var/lib/kubelet /var/log/kubernetes /etc/systemd/system/kubelet.service.d /etc/kubernetes/manifests/
# 所有k8s节点配置kubelet service
cat > /usr/lib/systemd/system/kubelet.service << EOF
[Unit]
Description=Kubernetes Kubelet
Documentation=https://github.com/kubernetes/kubernetes
After=containerd.service
Requires=containerd.service
[Service]
ExecStart=/usr/local/bin/kubelet \\
--bootstrap-kubeconfig=/etc/kubernetes/bootstrap-kubelet.kubeconfig \\
--kubeconfig=/etc/kubernetes/kubelet.kubeconfig \\
--config=/etc/kubernetes/kubelet-conf.yml \\
--container-runtime=remote \\
--runtime-request-timeout=15m \\
--container-runtime-endpoint=unix:///run/containerd/containerd.sock \\
--cgroup-driver=systemd \\
--node-labels=node.kubernetes.io/node= \\
--feature-gates=IPv6DualStack=true
[Install]
WantedBy=multi-user.target
EOF注意若是CentOS7，将 --node-labels=node.kubernetes.io/node='' 替换为 --node-labels=node.kubernetes.io/node=
将 '' 删除
cat > /etc/kubernetes/kubelet-conf.yml <<EOF
apiVersion: kubelet.config.k8s.io/v1beta1
kind: KubeletConfiguration
address: 0.0.0.0
port: 10250
readOnlyPort: 10255
authentication:
anonymous:
enabled: false
webhook:
cacheTTL: 2m0s
enabled: true
x509:
clientCAFile: /etc/kubernetes/pki/ca.pem
authorization:
mode: Webhook
webhook:
cacheAuthorizedTTL: 5m0s
cacheUnauthorizedTTL: 30s
cgroupDriver: systemd
cgroupsPerQOS: true
clusterDNS:
- 10.96.0.10
clusterDomain: cluster.local
containerLogMaxFiles: 5
containerLogMaxSize: 10Mi
contentType: application/vnd.kubernetes.protobuf
cpuCFSQuota: true
cpuManagerPolicy: none
cpuManagerReconcilePeriod: 10s
enableControllerAttachDetach: true
enableDebuggingHandlers: true
enforceNodeAllocatable:
- pods
eventBurst: 10
eventRecordQPS: 5
evictionHard:
imagefs.available: 15%
memory.available: 100Mi
nodefs.available: 10%
nodefs.inodesFree: 5%
evictionPressureTransitionPeriod: 5m0s
failSwapOn: true
fileCheckFrequency: 20s
hairpinMode: promiscuous-bridge
healthzBindAddress: 127.0.0.1
healthzPort: 10248
httpCheckFrequency: 20s
imageGCHighThresholdPercent: 85
imageGCLowThresholdPercent: 80
imageMinimumGCAge: 2m0s
iptablesDropBit: 15
iptablesMasqueradeBit: 14
kubeAPIBurst: 10
kubeAPIQPS: 5
makeIPTablesUtilChains: true
maxOpenFiles: 1000000
maxPods: 110
nodeStatusUpdateFrequency: 10s
oomScoreAdj: -999
podPidsLimit: -1
registryBurst: 10
registryPullQPS: 5
resolvConf: /etc/resolv.conf
rotateCertificates: true
runtimeRequestTimeout: 2m0s
serializeImagePulls: true
staticPodPath: /etc/kubernetes/manifests
streamingConnectionIdleTimeout: 4h0m0s
syncFrequency: 1m0s
volumeStatsAggPeriod: 1m0s
EOFsystemctl daemon-reload
systemctl restart kubelet
systemctl enable --now kubelet[root@k8s-master01 ~]# kubectl get node
NAME STATUS ROLES AGE VERSION
k8s-master01 Ready <none> 18s v1.24.2
k8s-master02 Ready <none> 16s v1.24.2
k8s-master03 Ready <none> 16s v1.24.2
k8s-node01 Ready <none> 14s v1.24.2
k8s-node02 Ready <none> 14s v1.24.2
k8s-node03 Ready <none> 14s v1.24.2
k8s-node04 Ready <none> 14s v1.24.2
k8s-node05 Ready <none> 14s v1.24.2
[root@k8s-master01 ~]#
for NODE in k8s-master02 k8s-master03; do scp /etc/kubernetes/kube-proxy.kubeconfig $NODE:/etc/kubernetes/kube-proxy.kubeconfig; done
for NODE in k8s-node01 k8s-node02 k8s-node03 k8s-node04 k8s-node05; do scp /etc/kubernetes/kube-proxy.kubeconfig $NODE:/etc/kubernetes/kube-proxy.kubeconfig; donecat > /usr/lib/systemd/system/kube-proxy.service << EOF
[Unit]
Description=Kubernetes Kube Proxy
Documentation=https://github.com/kubernetes/kubernetes
After=network.target
[Service]
ExecStart=/usr/local/bin/kube-proxy \\
--config=/etc/kubernetes/kube-proxy.yaml \\
--v=2
Restart=always
RestartSec=10s
[Install]
WantedBy=multi-user.target
EOFcat > /etc/kubernetes/kube-proxy.yaml << EOF
apiVersion: kubeproxy.config.k8s.io/v1alpha1
bindAddress: 0.0.0.0
clientConnection:
acceptContentTypes: ""
burst: 10
contentType: application/vnd.kubernetes.protobuf
kubeconfig: /etc/kubernetes/kube-proxy.kubeconfig
qps: 5
clusterCIDR: 172.16.0.0/12,fc00:2222::/112
configSyncPeriod: 15m0s
conntrack:
max: null
maxPerCore: 32768
min: 131072
tcpCloseWaitTimeout: 1h0m0s
tcpEstablishedTimeout: 24h0m0s
enableProfiling: false
healthzBindAddress: 0.0.0.0:10256
hostnameOverride: ""
iptables:
masqueradeAll: false
masqueradeBit: 14
minSyncPeriod: 0s
syncPeriod: 30s
ipvs:
masqueradeAll: true
minSyncPeriod: 5s
scheduler: "rr"
syncPeriod: 30s
kind: KubeProxyConfiguration
metricsBindAddress: 127.0.0.1:10249
mode: "ipvs"
nodePortAddresses: null
oomScoreAdj: -999
portRange: ""
udpIdleTimeout: 250ms
EOF systemctl daemon-reload
systemctl restart kube-proxy
systemctl enable --now kube-proxy群里网友反映说 centos7 要升级libseccomp 不然 无法安装calico
# vim calico.yaml
vim calico-ipv6.yaml
# calico-config ConfigMap处
"ipam": {
"type": "calico-ipam",
"assign_ipv4": "true",
"assign_ipv6": "true"
},
- name: IP
value: "autodetect"
- name: IP6
value: "autodetect"
- name: CALICO_IPV4POOL_CIDR
value: "172.16.0.0/12"
- name: CALICO_IPV6POOL_CIDR
value: "fc00::/48"
- name: FELIX_IPV6SUPPORT
value: "true"
# kubectl apply -f calico.yaml
kubectl apply -f calico-ipv6.yaml [root@k8s-master01 ~]# kubectl get pod -A
NAMESPACE NAME READY STATUS RESTARTS AGE
kube-system calico-kube-controllers-56cdb7c587-bq6rn 1/1 Running 0 10m
kube-system calico-node-2vt27 1/1 Running 0 10m
kube-system calico-node-7bg82 1/1 Running 0 10m
kube-system calico-node-gg9tv 1/1 Running 0 10m
kube-system calico-node-lkdhr 1/1 Running 0 10m
kube-system calico-node-msl6j 1/1 Running 0 10m
kube-system calico-node-qqrx9 1/1 Running 0 10m
kube-system calico-node-tgzxk 1/1 Running 0 10m
kube-system calico-node-z59jx 1/1 Running 0 10m
kube-system calico-typha-6775694657-xzmcs 1/1 Running 0 10m
[root@k8s-master01 ~]# cd coredns/
cat coredns.yaml | grep clusterIP:
clusterIP: 10.96.0.10 kubectl create -f coredns.yaml
serviceaccount/coredns created
clusterrole.rbac.authorization.k8s.io/system:coredns created
clusterrolebinding.rbac.authorization.k8s.io/system:coredns created
configmap/coredns created
deployment.apps/coredns created
service/kube-dns created在新版的Kubernetes中系统资源的采集均使用Metrics-server，可以通过Metrics采集节点和Pod的内存、磁盘、CPU和网络的使用率
# 安装metrics server
cd metrics-server/
kubectl apply -f metrics-server.yaml kubectl top node
NAME CPU(cores) CPU% MEMORY(bytes) MEMORY%
k8s-master01 154m 1% 1715Mi 21%
k8s-master02 151m 1% 1274Mi 16%
k8s-master03 523m 6% 1345Mi 17%
k8s-node01 84m 1% 671Mi 8%
k8s-node02 73m 0% 727Mi 9%
k8s-node03 96m 1% 769Mi 9%
k8s-node04 68m 0% 673Mi 8%
k8s-node05 82m 1% 679Mi 8% cat<<EOF | kubectl apply -f -
apiVersion: v1
kind: Pod
metadata:
name: busybox
namespace: default
spec:
containers:
- name: busybox
image: docker.io/library/busybox:1.28
command:
- sleep
- "3600"
imagePullPolicy: IfNotPresent
restartPolicy: Always
EOF
# 查看
kubectl get pod
NAME READY STATUS RESTARTS AGE
busybox 1/1 Running 0 17skubectl get svc
NAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S) AGE
kubernetes ClusterIP 10.96.0.1 <none> 443/TCP 17h
kubectl exec busybox -n default -- nslookup kubernetes
3Server: 10.96.0.10
Address 1: 10.96.0.10 kube-dns.kube-system.svc.cluster.local
Name: kubernetes
Address 1: 10.96.0.1 kubernetes.default.svc.cluster.localkubectl exec busybox -n default -- nslookup kube-dns.kube-system
Server: 10.96.0.10
Address 1: 10.96.0.10 kube-dns.kube-system.svc.cluster.local
Name: kube-dns.kube-system
Address 1: 10.96.0.10 kube-dns.kube-system.svc.cluster.localtelnet 10.96.0.1 443
Trying 10.96.0.1...
Connected to 10.96.0.1.
Escape character is '^]'.
telnet 10.96.0.10 53
Trying 10.96.0.10...
Connected to 10.96.0.10.
Escape character is '^]'.
curl 10.96.0.10:53
curl: (52) Empty reply from serverkubectl get po -owide
NAME READY STATUS RESTARTS AGE IP NODE NOMINATED NODE READINESS GATES
busybox 1/1 Running 0 17m 172.27.14.193 k8s-node02 <none> <none>
kubectl get po -n kube-system -owide
NAME READY STATUS RESTARTS AGE IP NODE NOMINATED NODE READINESS GATES
calico-kube-controllers-5dffd5886b-4blh6 1/1 Running 0 77m 172.25.244.193 k8s-master01 <none> <none>
calico-node-fvbdq 1/1 Running 1 (75m ago) 77m 10.0.0.61 k8s-master01 <none> <none>
calico-node-g8nqd 1/1 Running 0 77m 10.0.0.64 k8s-node01 <none> <none>
calico-node-mdps8 1/1 Running 0 77m 10.0.0.65 k8s-node02 <none> <none>
calico-node-nf4nt 1/1 Running 0 77m 10.0.0.63 k8s-master03 <none> <none>
calico-node-sq2ml 1/1 Running 0 77m 10.0.0.62 k8s-master02 <none> <none>
calico-typha-8445487f56-mg6p8 1/1 Running 0 77m 10.0.0.65 k8s-node02 <none> <none>
calico-typha-8445487f56-pxbpj 1/1 Running 0 77m 10.0.0.61 k8s-master01 <none> <none>
calico-typha-8445487f56-tnssl 1/1 Running 0 77m 10.0.0.64 k8s-node01 <none> <none>
coredns-5db5696c7-67h79 1/1 Running 0 63m 172.25.92.65 k8s-master02 <none> <none>
metrics-server-6bf7dcd649-5fhrw 1/1 Running 0 61m 172.18.195.1 k8s-master03 <none> <none>
# 进入busybox ping其他节点上的pod
kubectl exec -ti busybox -- sh
/ # ping 10.0.0.64
PING 10.0.0.64 (10.0.0.64): 56 data bytes
64 bytes from 10.0.0.64: seq=0 ttl=63 time=0.358 ms
64 bytes from 10.0.0.64: seq=1 ttl=63 time=0.668 ms
64 bytes from 10.0.0.64: seq=2 ttl=63 time=0.637 ms
64 bytes from 10.0.0.64: seq=3 ttl=63 time=0.624 ms
64 bytes from 10.0.0.64: seq=4 ttl=63 time=0.907 ms
# 可以连通证明这个pod是可以跨命名空间和跨主机通信的cat > deployments.yaml << EOF
apiVersion: apps/v1
kind: Deployment
metadata:
name: nginx-deployment
labels:
app: nginx
spec:
replicas: 3
selector:
matchLabels:
app: nginx
template:
metadata:
labels:
app: nginx
spec:
containers:
- name: nginx
image: docker.io/library/nginx:1.14.2
ports:
- containerPort: 80
EOF
kubectl apply -f deployments.yaml
deployment.apps/nginx-deployment created
kubectl get pod
NAME READY STATUS RESTARTS AGE
busybox 1/1 Running 0 6m25s
nginx-deployment-9456bbbf9-4bmvk 1/1 Running 0 8s
nginx-deployment-9456bbbf9-9rcdk 1/1 Running 0 8s
nginx-deployment-9456bbbf9-dqv8s 1/1 Running 0 8s
# 删除nginx
[root@k8s-master01 ~]# kubectl delete -f deployments.yaml wget https://raw.githubusercontent.com/cby-chen/Kubernetes/main/yaml/dashboard.yaml
wget https://raw.githubusercontent.com/cby-chen/Kubernetes/main/yaml/dashboard-user.yaml
kubectl apply -f dashboard.yaml
kubectl apply -f dashboard-user.yamlkubectl edit svc kubernetes-dashboard -n kubernetes-dashboard
type: NodePortkubectl get svc kubernetes-dashboard -n kubernetes-dashboard
NAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S) AGE
kubernetes-dashboard NodePort 10.108.120.110 <none> 443:30034/TCP 34skubectl -n kubernetes-dashboard create token admin-user
eyJhbGciOiJSUzI1NiIsImtpZCI6Inlkd0RKV2lQeUpvNmRxb2hENDlRM3llWU55T2I4dC0wVW5KOU5PZGRSdWsifQ.eyJhdWQiOlsiaHR0cHM6Ly9rdWJlcm5ldGVzLmRlZmF1bHQuc3ZjLmNsdXN0ZXIubG9jYWwiXSwiZXhwIjoxNjU1NzA2MTQwLCJpYXQiOjE2NTU3MDI1NDAsImlzcyI6Imh0dHBzOi8va3ViZXJuZXRlcy5kZWZhdWx0LnN2Yy5jbHVzdGVyLmxvY2FsIiwia3ViZXJuZXRlcy5pbyI6eyJuYW1lc3BhY2UiOiJrdWJlcm5ldGVzLWRhc2hib2FyZCIsInNlcnZpY2VhY2NvdW50Ijp7Im5hbWUiOiJhZG1pbi11c2VyIiwidWlkIjoiZGVhYjdiY2MtNDczZS00N2E0LThlYTUtZmE4Yjc2NGY2NGJjIn19LCJuYmYiOjE2NTU3MDI1NDAsInN1YiI6InN5c3RlbTpzZXJ2aWNlYWNjb3VudDprdWJlcm5ldGVzLWRhc2hib2FyZDphZG1pbi11c2VyIn0.YzVrnSq3IuWn3qqY_td7SPqHisT40Gk1neMx7Ok9PsTxd6RASWxv9Y_1-T4wpE3ljaCiXxMBETzvYDgf-y9FOxm6drkQWWLk9UUuvOdjexxkdTXztB5X_0BiUGcMlvD3CA0qFbnzcg1cLpokypkuOnlSB8GBTleNyhQvHQnoXU3fSUCNRR_zHu2bRNgJZwABPMdj2D42EQndD56ZDP4g4IK8iMVJbaM-6DdNjdpfQx2358n8syPDjznu_1W1fUvwxY3eoEyeuIEjDbEeYEwh5uW2k4NOjW8m54W2YgmipDuqpvIB_-cnAo_KzF2q1Qb4WpIAItGkkpgwQFMFagKRTgcd ingress/
kubectl apply -f deploy.yaml
kubectl apply -f backend.yaml
# 等创建完成后在执行：
kubectl apply -f ingress-demo-app.yaml
kubectl get ingress
NAME CLASS HOSTS ADDRESS PORTS AGE
ingress-host-bar nginx hello.chenby.cn,demo.chenby.cn 10.0.0.62 80 7s
[root@hello ~/yaml]# kubectl get svc -A | grep ingress
ingress-nginx ingress-nginx-controller NodePort 10.104.231.36 <none> 80:32636/TCP,443:30579/TCP 104s
ingress-nginx ingress-nginx-controller-admission ClusterIP 10.101.85.88 <none> 443/TCP 105s
[root@hello ~/yaml]#
#部署应用
[root@k8s-master01 ~]# vim cby.yaml
[root@k8s-master01 ~]# cat cby.yaml
apiVersion: apps/v1
kind: Deployment
metadata:
name: chenby
spec:
replicas: 3
selector:
matchLabels:
app: chenby
template:
metadata:
labels:
app: chenby
spec:
containers:
- name: chenby
image: docker.io/library/nginx
resources:
limits:
memory: "128Mi"
cpu: "500m"
ports:
- containerPort: 80
---
apiVersion: v1
kind: Service
metadata:
name: chenby
spec:
ipFamilyPolicy: PreferDualStack
ipFamilies:
- IPv6
- IPv4
type: NodePort
selector:
app: chenby
ports:
- port: 80
targetPort: 80
[root@k8s-master01 ~]# kubectl apply -f cby.yaml
#查看端口
[root@k8s-master01 ~]# kubectl get svc
NAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S) AGE
chenby NodePort fd00::a29c <none> 80:30779/TCP 5s
[root@k8s-master01 ~]#
#使用内网访问
[root@localhost yaml]# curl -I http://[fd00::a29c]
HTTP/1.1 200 OK
Server: nginx/1.21.6
Date: Thu, 05 May 2022 10:20:35 GMT
Content-Type: text/html
Content-Length: 615
Last-Modified: Tue, 25 Jan 2022 15:03:52 GMT
Connection: keep-alive
ETag: "61f01158-267"
Accept-Ranges: bytes
[root@localhost yaml]# curl -I http://10.0.0.61:30779
HTTP/1.1 200 OK
Server: nginx/1.21.6
Date: Thu, 05 May 2022 10:20:59 GMT
Content-Type: text/html
Content-Length: 615
Last-Modified: Tue, 25 Jan 2022 15:03:52 GMT
Connection: keep-alive
ETag: "61f01158-267"
Accept-Ranges: bytes
[root@localhost yaml]#
#使用公网访问
[root@localhost yaml]# curl -I http://[2408:8207:78cc:5cc1:181c::10]:30779
HTTP/1.1 200 OK
Server: nginx/1.21.6
Date: Thu, 05 May 2022 10:20:54 GMT
Content-Type: text/html
Content-Length: 615
Last-Modified: Tue, 25 Jan 2022 15:03:52 GMT
Connection: keep-alive
ETag: "61f01158-267"
Accept-Ranges: bytes
yum install bash-completion -y
source /usr/share/bash-completion/bash_completion
source <(kubectl completion bash)
echo "source <(kubectl completion bash)" >> ~/.bashrc关于
https://www.oiox.cn/index.php/start-page.html
CSDN、GitHub、知乎、开源中国、思否、掘金、简书、华为云、阿里云、腾讯云、哔哩哔哩、今日头条、新浪微博、个人博客
全网可搜《小陈运维》
文章主要发布于微信公众号：《Linux运维交流社区》