diff --git a/charts/celestia-app/Chart.yaml b/charts/celestia-app/Chart.yaml
index 59905ef..d8a013a 100644
--- a/charts/celestia-app/Chart.yaml
+++ b/charts/celestia-app/Chart.yaml
@@ -2,7 +2,7 @@ annotations:
   category: celestia
   licenses: Apache-2.0
 apiVersion: v2
-appVersion: v3.1.1
+appVersion: v3.2.0
 dependencies:
 - name: common-celestia-app
   version: 0.1.1
@@ -24,4 +24,4 @@ maintainers:
 name: celestia-app
 sources:
   - https://github.com/celestiaorg/celestia-app
-version: 0.0.4
+version: 0.0.5
diff --git a/charts/celestia-app/values.yaml b/charts/celestia-app/values.yaml
index 395ffc7..889684f 100644
--- a/charts/celestia-app/values.yaml
+++ b/charts/celestia-app/values.yaml
@@ -95,7 +95,7 @@ app:
     # -- repository for the image, celestiaorg/celestia-app by default
     repository: celestiaorg/celestia-app
     # -- tag for the image, v3.0.0 by default
-    tag: v3.1.1
+    tag: v3.2.0
     digest: ""
     ## Specify a imagePullPolicy
     ## Defaults to 'Always' if image tag is 'latest', else set to 'IfNotPresent'
diff --git a/scripts/config/app/v3.2.0-arabica/app.toml b/scripts/config/app/v3.2.0-arabica/app.toml
new file mode 100644
index 0000000..7759ce7
--- /dev/null
+++ b/scripts/config/app/v3.2.0-arabica/app.toml
@@ -0,0 +1,252 @@
+# This is a TOML config file.
+# For more information, see https://github.com/toml-lang/toml
+
+###############################################################################
+###                           Base Configuration                            ###
+###############################################################################
+
+# The minimum gas prices a validator is willing to accept for processing a
+# transaction. A transaction's fees must meet the minimum of any denomination
+# specified in this config (e.g. 0.25token1;0.0001token2).
+minimum-gas-prices = "0.002utia"
+
+# default: the last 362880 states are kept, pruning at 10 block intervals
+# nothing: all historic states will be saved, nothing will be deleted (i.e. archiving node)
+# everything: 2 latest states will be kept; pruning at 10 block intervals.
+# custom: allow pruning options to be manually specified through 'pruning-keep-recent', and 'pruning-interval'
+pruning = "default"
+
+# These are applied if and only if the pruning strategy is custom.
+pruning-keep-recent = "0"
+pruning-interval = "0"
+
+# HaltHeight contains a non-zero block height at which a node will gracefully
+# halt and shutdown that can be used to assist upgrades and testing.
+#
+# Note: Commitment of state will be attempted on the corresponding block.
+halt-height = 0
+
+# HaltTime contains a non-zero minimum block time (in Unix seconds) at which
+# a node will gracefully halt and shutdown that can be used to assist upgrades
+# and testing.
+#
+# Note: Commitment of state will be attempted on the corresponding block.
+halt-time = 0
+
+# MinRetainBlocks defines the minimum block height offset from the current
+# block being committed, such that all blocks past this offset are pruned
+# from Tendermint. It is used as part of the process of determining the
+# ResponseCommit.RetainHeight value during ABCI Commit. A value of 0 indicates
+# that no blocks should be pruned.
+#
+# This configuration value is only responsible for pruning Tendermint blocks.
+# It has no bearing on application state pruning which is determined by the
+# "pruning-*" configurations.
+#
+# Note: Tendermint block pruning is dependant on this parameter in conunction
+# with the unbonding (safety threshold) period, state pruning and state sync
+# snapshot parameters to determine the correct minimum value of
+# ResponseCommit.RetainHeight.
+min-retain-blocks = 0
+
+# InterBlockCache enables inter-block caching.
+inter-block-cache = true
+
+# IndexEvents defines the set of events in the form {eventType}.{attributeKey},
+# which informs Tendermint what to index. If empty, all events will be indexed.
+#
+# Example:
+# ["message.sender", "message.recipient"]
+index-events = []
+
+# IavlCacheSize set the size of the iavl tree cache. 
+# Default cache size is 50mb.
+iavl-cache-size = 781250
+
+# IavlDisableFastNode enables or disables the fast node feature of IAVL. 
+# Default is false.
+iavl-disable-fastnode = false
+
+# EXPERIMENTAL: IAVLLazyLoading enable/disable the lazy loading of iavl store.
+# Default is false.
+iavl-lazy-loading = false
+
+# AppDBBackend defines the database backend type to use for the application and snapshots DBs.
+# An empty string indicates that a fallback will be used.
+# First fallback is the deprecated compile-time types.DBBackend value.
+# Second fallback (if the types.DBBackend also isn't set), is the db-backend value set in Tendermint's config.toml.
+app-db-backend = ""
+
+###############################################################################
+###                         Telemetry Configuration                         ###
+###############################################################################
+
+[telemetry]
+
+# Prefixed with keys to separate services.
+service-name = ""
+
+# Enabled enables the application telemetry functionality. When enabled,
+# an in-memory sink is also enabled by default. Operators may also enabled
+# other sinks such as Prometheus.
+enabled = false
+
+# Enable prefixing gauge values with hostname.
+enable-hostname = false
+
+# Enable adding hostname to labels.
+enable-hostname-label = false
+
+# Enable adding service to labels.
+enable-service-label = false
+
+# PrometheusRetentionTime, when positive, enables a Prometheus metrics sink.
+prometheus-retention-time = 0
+
+# GlobalLabels defines a global set of name/value label tuples applied to all
+# metrics emitted using the wrapper functions defined in telemetry package.
+#
+# Example:
+# [["chain_id", "cosmoshub-1"]]
+global-labels = [
+]
+
+###############################################################################
+###                           API Configuration                             ###
+###############################################################################
+
+[api]
+
+# Enable defines if the API server should be enabled.
+enable = false
+
+# Swagger defines if swagger documentation should automatically be registered.
+swagger = false
+
+# Address defines the API server to listen on.
+address = "tcp://0.0.0.0:1317"
+
+# MaxOpenConnections defines the number of maximum open connections.
+max-open-connections = 1000
+
+# RPCReadTimeout defines the Tendermint RPC read timeout (in seconds).
+rpc-read-timeout = 10
+
+# RPCWriteTimeout defines the Tendermint RPC write timeout (in seconds).
+rpc-write-timeout = 0
+
+# RPCMaxBodyBytes defines the Tendermint maximum response body (in bytes).
+rpc-max-body-bytes = 1000000
+
+# EnableUnsafeCORS defines if CORS should be enabled (unsafe - use it at your own risk).
+enabled-unsafe-cors = false
+
+###############################################################################
+###                           Rosetta Configuration                         ###
+###############################################################################
+
+[rosetta]
+
+# Enable defines if the Rosetta API server should be enabled.
+enable = false
+
+# Address defines the Rosetta API server to listen on.
+address = ":8080"
+
+# Network defines the name of the blockchain that will be returned by Rosetta.
+blockchain = "app"
+
+# Network defines the name of the network that will be returned by Rosetta.
+network = "network"
+
+# Retries defines the number of retries when connecting to the node before failing.
+retries = 3
+
+# Offline defines if Rosetta server should run in offline mode.
+offline = false
+
+# EnableDefaultSuggestedFee defines if the server should suggest fee by default.
+# If 'construction/medata' is called without gas limit and gas price,
+# suggested fee based on gas-to-suggest and denom-to-suggest will be given.
+enable-fee-suggestion = false
+
+# GasToSuggest defines gas limit when calculating the fee
+gas-to-suggest = 210000
+
+# DenomToSuggest defines the defult denom for fee suggestion.
+# Price must be in minimum-gas-prices.
+denom-to-suggest = "uatom"
+
+###############################################################################
+###                           gRPC Configuration                            ###
+###############################################################################
+
+[grpc]
+
+# Enable defines if the gRPC server should be enabled.
+enable = false
+
+# Address defines the gRPC server address to bind to.
+address = "0.0.0.0:9090"
+
+# MaxRecvMsgSize defines the max message size in bytes the server can receive.
+# The default value is 10MB.
+max-recv-msg-size = "10485760"
+
+# MaxSendMsgSize defines the max message size in bytes the server can send.
+# The default value is math.MaxInt32.
+max-send-msg-size = "2147483647"
+
+###############################################################################
+###                        gRPC Web Configuration                           ###
+###############################################################################
+
+[grpc-web]
+
+# GRPCWebEnable defines if the gRPC-web should be enabled.
+# NOTE: gRPC must also be enabled, otherwise, this configuration is a no-op.
+enable = false
+
+# Address defines the gRPC-web server address to bind to.
+address = "0.0.0.0:9091"
+
+# EnableUnsafeCORS defines if CORS should be enabled (unsafe - use it at your own risk).
+enable-unsafe-cors = false
+
+###############################################################################
+###                        State Sync Configuration                         ###
+###############################################################################
+
+# State sync snapshots allow other nodes to rapidly join the network without replaying historical
+# blocks, instead downloading and applying a snapshot of the application state at a given height.
+[state-sync]
+
+# snapshot-interval specifies the block interval at which local state sync snapshots are
+# taken (0 to disable).
+snapshot-interval = 1500
+
+# snapshot-keep-recent specifies the number of recent snapshots to keep and serve (0 to keep all).
+snapshot-keep-recent = 2
+
+###############################################################################
+###                         Store / State Streaming                         ###
+###############################################################################
+
+[store]
+streamers = []
+
+[streamers]
+[streamers.file]
+keys = ["*", ]
+write_dir = ""
+prefix = ""
+
+# output-metadata specifies if output the metadata file which includes the abci request/responses 
+# during processing the block.
+output-metadata = "true"
+
+# stop-node-on-error specifies if propagate the file streamer errors to consensus state machine.
+stop-node-on-error = "true"
+
+# fsync specifies if call fsync after writing the files.
+fsync = "false"
diff --git a/scripts/config/app/v3.2.0-arabica/client.toml b/scripts/config/app/v3.2.0-arabica/client.toml
new file mode 100644
index 0000000..15ef7a8
--- /dev/null
+++ b/scripts/config/app/v3.2.0-arabica/client.toml
@@ -0,0 +1,17 @@
+# This is a TOML config file.
+# For more information, see https://github.com/toml-lang/toml
+
+###############################################################################
+###                           Client Configuration                            ###
+###############################################################################
+
+# The network chain ID
+chain-id = "celestia"
+# The keyring's backend, where the keys are stored (os|file|kwallet|pass|test|memory)
+keyring-backend = "test"
+# CLI output format (text|json)
+output = "text"
+# <host>:<port> to Tendermint RPC interface for this chain
+node = "tcp://localhost:26657"
+# Transaction broadcasting mode (sync|async|block)
+broadcast-mode = "sync"
diff --git a/scripts/config/app/v3.2.0-arabica/config.toml b/scripts/config/app/v3.2.0-arabica/config.toml
new file mode 100644
index 0000000..7aee6a2
--- /dev/null
+++ b/scripts/config/app/v3.2.0-arabica/config.toml
@@ -0,0 +1,539 @@
+# This is a TOML config file.
+# For more information, see https://github.com/toml-lang/toml
+
+# NOTE: Any path below can be absolute (e.g. "/var/myawesomeapp/data") or
+# relative to the home directory (e.g. "data"). The home directory is
+# "$HOME/.cometbft" by default, but could be changed via $CMTHOME env variable
+# or --home cmd flag.
+
+#######################################################################
+###                   Main Base Config Options                      ###
+#######################################################################
+
+# TCP or UNIX socket address of the ABCI application,
+# or the name of an ABCI application compiled in with the CometBFT binary
+proxy_app = "tcp://127.0.0.1:26658"
+
+# A custom human readable name for this node
+moniker = "app"
+
+# If this node is many blocks behind the tip of the chain, FastSync
+# allows them to catchup quickly by downloading blocks in parallel
+# and verifying their commits
+fast_sync = true
+
+# Database backend: goleveldb | cleveldb | boltdb | rocksdb | badgerdb
+# * goleveldb (github.com/syndtr/goleveldb - most popular implementation)
+#   - pure go
+#   - stable
+# * cleveldb (uses levigo wrapper)
+#   - fast
+#   - requires gcc
+#   - use cleveldb build tag (go build -tags cleveldb)
+# * boltdb (uses etcd's fork of bolt - github.com/etcd-io/bbolt)
+#   - EXPERIMENTAL
+#   - may be faster is some use-cases (random reads - indexer)
+#   - use boltdb build tag (go build -tags boltdb)
+# * rocksdb (uses github.com/tecbot/gorocksdb)
+#   - EXPERIMENTAL
+#   - requires gcc
+#   - use rocksdb build tag (go build -tags rocksdb)
+# * badgerdb (uses github.com/dgraph-io/badger)
+#   - EXPERIMENTAL
+#   - use badgerdb build tag (go build -tags badgerdb)
+db_backend = "goleveldb"
+
+# Database directory
+db_dir = "data"
+
+# Output level for logging, including package level options
+log_level = "info"
+
+# Output format: 'plain' (colored text) or 'json'
+log_format = "plain"
+
+##### additional base config options #####
+
+# Path to the JSON file containing the initial validator set and other meta data
+genesis_file = "config/genesis.json"
+
+# Path to the JSON file containing the private key to use as a validator in the consensus protocol
+priv_validator_key_file = "config/priv_validator_key.json"
+
+# Path to the JSON file containing the last sign state of a validator
+priv_validator_state_file = "data/priv_validator_state.json"
+
+# TCP or UNIX socket address for CometBFT to listen on for
+# connections from an external PrivValidator process
+priv_validator_laddr = ""
+
+# Path to the JSON file containing the private key to use for node authentication in the p2p protocol
+node_key_file = "config/node_key.json"
+
+# Mechanism to connect to the ABCI application: socket | grpc
+abci = "socket"
+
+# If true, query the ABCI app on connecting to a new peer
+# so the app can decide if we should keep the connection or not
+filter_peers = false
+
+
+#######################################################################
+###                 Advanced Configuration Options                  ###
+#######################################################################
+
+#######################################################
+###       RPC Server Configuration Options          ###
+#######################################################
+[rpc]
+
+# TCP or UNIX socket address for the RPC server to listen on
+laddr = "tcp://127.0.0.1:26657"
+
+# A list of origins a cross-domain request can be executed from
+# Default value '[]' disables cors support
+# Use '["*"]' to allow any origin
+cors_allowed_origins = []
+
+# A list of methods the client is allowed to use with cross-domain requests
+cors_allowed_methods = ["HEAD", "GET", "POST", ]
+
+# A list of non simple headers the client is allowed to use with cross-domain requests
+cors_allowed_headers = ["Origin", "Accept", "Content-Type", "X-Requested-With", "X-Server-Time", ]
+
+# TCP or UNIX socket address for the gRPC server to listen on
+# NOTE: This server only supports /broadcast_tx_commit
+grpc_laddr = ""
+
+# Maximum number of simultaneous connections.
+# Does not include RPC (HTTP&WebSocket) connections. See max_open_connections
+# If you want to accept a larger number than the default, make sure
+# you increase your OS limits.
+# 0 - unlimited.
+# Should be < {ulimit -Sn} - {MaxNumInboundPeers} - {MaxNumOutboundPeers} - {N of wal, db and other open files}
+# 1024 - 40 - 10 - 50 = 924 = ~900
+grpc_max_open_connections = 900
+
+# Activate unsafe RPC commands like /dial_seeds and /unsafe_flush_mempool
+unsafe = false
+
+# Maximum number of simultaneous connections (including WebSocket).
+# Does not include gRPC connections. See grpc_max_open_connections
+# If you want to accept a larger number than the default, make sure
+# you increase your OS limits.
+# 0 - unlimited.
+# Should be < {ulimit -Sn} - {MaxNumInboundPeers} - {MaxNumOutboundPeers} - {N of wal, db and other open files}
+# 1024 - 40 - 10 - 50 = 924 = ~900
+max_open_connections = 900
+
+# Maximum number of unique clientIDs that can /subscribe
+# If you're using /broadcast_tx_commit, set to the estimated maximum number
+# of broadcast_tx_commit calls per block.
+max_subscription_clients = 100
+
+# Maximum number of unique queries a given client can /subscribe to
+# If you're using GRPC (or Local RPC client) and /broadcast_tx_commit, set to
+# the estimated # maximum number of broadcast_tx_commit calls per block.
+max_subscriptions_per_client = 5
+
+# Experimental parameter to specify the maximum number of events a node will
+# buffer, per subscription, before returning an error and closing the
+# subscription. Must be set to at least 100, but higher values will accommodate
+# higher event throughput rates (and will use more memory).
+experimental_subscription_buffer_size = 200
+
+# Experimental parameter to specify the maximum number of RPC responses that
+# can be buffered per WebSocket client. If clients cannot read from the
+# WebSocket endpoint fast enough, they will be disconnected, so increasing this
+# parameter may reduce the chances of them being disconnected (but will cause
+# the node to use more memory).
+#
+# Must be at least the same as "experimental_subscription_buffer_size",
+# otherwise connections could be dropped unnecessarily. This value should
+# ideally be somewhat higher than "experimental_subscription_buffer_size" to
+# accommodate non-subscription-related RPC responses.
+experimental_websocket_write_buffer_size = 200
+
+# If a WebSocket client cannot read fast enough, at present we may
+# silently drop events instead of generating an error or disconnecting the
+# client.
+#
+# Enabling this experimental parameter will cause the WebSocket connection to
+# be closed instead if it cannot read fast enough, allowing for greater
+# predictability in subscription behaviour.
+experimental_close_on_slow_client = false
+
+# How long to wait for a tx to be committed during /broadcast_tx_commit.
+# WARNING: Using a value larger than 10s will result in increasing the
+# global HTTP write timeout, which applies to all connections and endpoints.
+# See https://github.com/tendermint/tendermint/issues/3435
+timeout_broadcast_tx_commit = "50s"
+
+# Maximum size of request body, in bytes
+max_body_bytes = 8388608
+
+# Maximum size of request header, in bytes
+max_header_bytes = 1048576
+
+# The path to a file containing certificate that is used to create the HTTPS server.
+# Might be either absolute path or path related to CometBFT's config directory.
+# If the certificate is signed by a certificate authority,
+# the certFile should be the concatenation of the server's certificate, any intermediates,
+# and the CA's certificate.
+# NOTE: both tls_cert_file and tls_key_file must be present for CometBFT to create HTTPS server.
+# Otherwise, HTTP server is run.
+tls_cert_file = ""
+
+# The path to a file containing matching private key that is used to create the HTTPS server.
+# Might be either absolute path or path related to CometBFT's config directory.
+# NOTE: both tls-cert-file and tls-key-file must be present for CometBFT to create HTTPS server.
+# Otherwise, HTTP server is run.
+tls_key_file = ""
+
+# pprof listen address (https://golang.org/pkg/net/http/pprof)
+pprof_laddr = "localhost:6060"
+
+#######################################################
+###           P2P Configuration Options             ###
+#######################################################
+[p2p]
+
+# Address to listen for incoming connections
+laddr = "tcp://0.0.0.0:26656"
+
+# Address to advertise to peers for them to dial
+# If empty, will use the same port as the laddr,
+# and will introspect on the listener or use UPnP
+# to figure out the address. ip and port are required
+# example: 159.89.10.97:26656
+external_address = ""
+
+# Comma separated list of seed nodes to connect to
+seeds = ""
+
+# Comma separated list of nodes to keep persistent connections to
+persistent_peers = ""
+
+# UPNP port forwarding
+upnp = false
+
+# Path to address book
+addr_book_file = "config/addrbook.json"
+
+# Set true for strict address routability rules
+# Set false for private or local networks
+addr_book_strict = true
+
+# Maximum number of inbound peers
+max_num_inbound_peers = 40
+
+# Maximum number of outbound peers to connect to, excluding persistent peers
+max_num_outbound_peers = 10
+
+# List of node IDs, to which a connection will be (re)established ignoring any existing limits
+unconditional_peer_ids = ""
+
+# Maximum pause when redialing a persistent peer (if zero, exponential backoff is used)
+persistent_peers_max_dial_period = "0s"
+
+# Time to wait before flushing messages out on the connection
+flush_throttle_timeout = "100ms"
+
+# Maximum size of a message packet payload, in bytes
+max_packet_msg_payload_size = 1024
+
+# Rate at which packets can be sent, in bytes/second
+send_rate = 5120000
+
+# Rate at which packets can be received, in bytes/second
+recv_rate = 5120000
+
+# Set true to enable the peer-exchange reactor
+pex = true
+
+# Seed mode, in which node constantly crawls the network and looks for
+# peers. If another node asks it for addresses, it responds and disconnects.
+#
+# Does not work if the peer-exchange reactor is disabled.
+seed_mode = false
+
+# Comma separated list of peer IDs to keep private (will not be gossiped to other peers)
+private_peer_ids = ""
+
+# Toggle to disable guard against peers connecting from the same ip.
+allow_duplicate_ip = false
+
+# Peer connection configuration.
+handshake_timeout = "20s"
+dial_timeout = "3s"
+
+#######################################################
+###          Mempool Configuration Option          ###
+#######################################################
+[mempool]
+
+# Mempool version to use:
+#   1) "v0" - FIFO mempool.
+#   2) "v1" - (default) prioritized mempool.
+#   3) "v2" - content addressable transaction pool
+version = "v1"
+
+# Recheck (default: true) defines whether CometBFT should recheck the
+# validity for all remaining transaction in the mempool after a block.
+# Since a block affects the application state, some transactions in the
+# mempool may become invalid. If this does not apply to your application,
+# you can disable rechecking.
+recheck = true
+broadcast = true
+wal_dir = ""
+
+# Maximum number of transactions in the mempool
+size = 5000
+
+# Limit the total size of all txs in the mempool.
+# This only accounts for raw transactions (e.g. given 1MB transactions and
+# max_txs_bytes=5MB, mempool will only accept 5 transactions).
+max_txs_bytes = 39485440
+
+# Size of the cache (used to filter transactions we saw earlier) in transactions
+cache_size = 10000
+
+# Do not remove invalid transactions from the cache (default: false)
+# Set to true if it's not possible for any invalid transaction to become valid
+# again in the future.
+keep-invalid-txs-in-cache = false
+
+# Maximum size of a single transaction.
+# NOTE: the max size of a tx transmitted over the network is {max_tx_bytes}.
+max_tx_bytes = 7897088
+
+# Maximum size of a batch of transactions to send to a peer
+# Including space needed by encoding (one varint per transaction).
+# XXX: Unused due to https://github.com/tendermint/tendermint/issues/5796
+max_batch_bytes = 0
+
+# ttl-duration, if non-zero, defines the maximum amount of time a transaction
+# can exist for in the mempool.
+#
+# Note, if ttl-num-blocks is also defined, a transaction will be removed if it
+# has existed in the mempool at least ttl-num-blocks number of blocks or if it's
+# insertion time into the mempool is beyond ttl-duration.
+ttl-duration = "1m15s"
+
+# ttl-num-blocks, if non-zero, defines the maximum number of blocks a transaction
+# can exist for in the mempool.
+#
+# Note, if ttl-duration is also defined, a transaction will be removed if it
+# has existed in the mempool at least ttl-num-blocks number of blocks or if
+# it's insertion time into the mempool is beyond ttl-duration.
+ttl-num-blocks = 12
+
+# max-gossip-delay is the maximum allotted time that the reactor expects a transaction to
+# arrive before issuing a new request to a different peer
+# Only applicable to the v2 / CAT mempool
+# Default is 200ms
+max-gossip-delay = "0s"
+
+# Experimental parameters to limit gossiping txs to up to the specified number of peers.
+# This feature is only available for the default mempool (version config set to "v0").
+# We use two independent upper values for persistent and non-persistent peers.
+# Unconditional peers are not affected by this feature.
+# If we are connected to more than the specified number of persistent peers, only send txs to
+# ExperimentalMaxGossipConnectionsToPersistentPeers of them. If one of those
+# persistent peers disconnects, activate another persistent peer.
+# Similarly for non-persistent peers, with an upper limit of
+# ExperimentalMaxGossipConnectionsToNonPersistentPeers.
+# If set to 0, the feature is disabled for the corresponding group of peers, that is, the
+# number of active connections to that group of peers is not bounded.
+# For non-persistent peers, if enabled, a value of 10 is recommended based on experimental
+# performance results using the default P2P configuration.
+experimental_max_gossip_connections_to_persistent_peers = 0
+experimental_max_gossip_connections_to_non_persistent_peers = 0
+
+#######################################################
+###         State Sync Configuration Options        ###
+#######################################################
+[statesync]
+# State sync rapidly bootstraps a new node by discovering, fetching, and restoring a state machine
+# snapshot from peers instead of fetching and replaying historical blocks. Requires some peers in
+# the network to take and serve state machine snapshots. State sync is not attempted if the node
+# has any local state (LastBlockHeight > 0). The node will have a truncated block history,
+# starting from the height of the snapshot.
+enable = false
+
+# RPC servers (comma-separated) for light client verification of the synced state machine and
+# retrieval of state data for node bootstrapping. Also needs a trusted height and corresponding
+# header hash obtained from a trusted source, and a period during which validators can be trusted.
+#
+# For Cosmos SDK-based chains, trust_period should usually be about 2/3 of the unbonding time (~2
+# weeks) during which they can be financially punished (slashed) for misbehavior.
+rpc_servers = ""
+trust_height = 0
+trust_hash = ""
+trust_period = "168h0m0s"
+
+# Time to spend discovering snapshots before initiating a restore.
+discovery_time = "15s"
+
+# Temporary directory for state sync snapshot chunks, defaults to the OS tempdir (typically /tmp).
+# Will create a new, randomly named directory within, and remove it when done.
+temp_dir = ""
+
+# The timeout duration before re-requesting a chunk, possibly from a different
+# peer (default: 1 minute).
+chunk_request_timeout = "10s"
+
+# The number of concurrent chunk fetchers to run (default: 1).
+chunk_fetchers = "4"
+
+#######################################################
+###       Fast Sync Configuration Connections       ###
+#######################################################
+[fastsync]
+
+# Fast Sync version to use:
+#   1) "v0" (default) - the legacy fast sync implementation
+#   "v1" and "v2" are disabled. They have been deprecated and will
+#   be completely removed in one of the upcoming releases
+version = "v0"
+
+#######################################################
+###         Consensus Configuration Options         ###
+#######################################################
+[consensus]
+
+# If set to "true", only internal messages will be
+# written to the WAL. External messages like votes, proposal,
+# block parts, will not be written.
+only_internal_wal = "true"
+
+wal_file = "data/cs.wal/wal"
+
+# How long we wait for a proposal block before prevoting nil
+# Deprecated: timeout_commit is overridden by the state machine in app version >= 3.
+# Therefore, the value set in this config will be ignored.
+timeout_propose = "3.5s"
+# How much timeout_propose increases with each round
+timeout_propose_delta = "500ms"
+# How long we wait after receiving +2/3 prevotes for “anything” (ie. not a single block or nil)
+timeout_prevote = "1s"
+# How much the timeout_prevote increases with each round
+timeout_prevote_delta = "500ms"
+# How long we wait after receiving +2/3 precommits for “anything” (ie. not a single block or nil)
+timeout_precommit = "1s"
+# How much the timeout_precommit increases with each round
+timeout_precommit_delta = "500ms"
+# How long we wait after committing a block, before starting on the new
+# height (this gives us a chance to receive some more precommits, even
+# though we already have +2/3).
+# Deprecated: timeout_commit is overridden by the state machine in app version >= 3.
+# Therefore, the value set in this config will be ignored.
+timeout_commit = "4.2s"
+
+# How many blocks to look back to check existence of the node's consensus votes before joining consensus
+# When non-zero, the node will panic upon restart
+# if the same consensus key was used to sign {double_sign_check_height} last blocks.
+# So, validators should stop the state machine, wait for some blocks, and then restart the state machine to avoid panic.
+double_sign_check_height = 0
+
+# Make progress as soon as we have all the precommits (as if TimeoutCommit = 0)
+skip_timeout_commit = false
+
+# EmptyBlocks mode and possible interval between empty blocks
+create_empty_blocks = true
+create_empty_blocks_interval = "0s"
+
+# Reactor sleep duration parameters
+peer_gossip_sleep_duration = "100ms"
+peer_query_maj23_sleep_duration = "2s"
+
+#######################################################
+###         Storage Configuration Options           ###
+#######################################################
+[storage]
+
+# Set to true to discard ABCI responses from the state store, which can save a
+# considerable amount of disk space. Set to false to ensure ABCI responses are
+# persisted. ABCI responses are required for /block_results RPC queries, and to
+# reindex events in the command-line tool.
+discard_abci_responses = true
+
+#######################################################
+###   Transaction Indexer Configuration Options     ###
+#######################################################
+[tx_index]
+
+# What indexer to use for transactions
+#
+# The application will set which txs to index. In some cases a node operator will be able
+# to decide which txs to index based on configuration set in the application.
+#
+# Options:
+#   1) "null"
+#   2) "kv" (default) - the simplest possible indexer, backed by key-value storage (defaults to levelDB; see DBBackend).
+# 		- When "kv" is chosen "tx.height" and "tx.hash" will always be indexed.
+#   3) "psql" - the indexer services backed by PostgreSQL.
+# When "kv" or "psql" is chosen "tx.height" and "tx.hash" will always be indexed.
+indexer = "null"
+
+# The PostgreSQL connection configuration, the connection format:
+#   postgresql://<user>:<password>@<host>:<port>/<db>?<opts>
+psql-conn = ""
+
+#######################################################
+###       Instrumentation Configuration Options     ###
+#######################################################
+[instrumentation]
+
+# When true, Prometheus metrics are served under /metrics on
+# PrometheusListenAddr.
+# Check out the documentation for the list of available metrics.
+prometheus = false
+
+# Address to listen for Prometheus collector(s) connections
+prometheus_listen_addr = ":26660"
+
+# Maximum number of simultaneous connections.
+# If you want to accept a larger number than the default, make sure
+# you increase your OS limits.
+# 0 - unlimited.
+max_open_connections = 3
+
+# Instrumentation namespace
+namespace = "cometbft"
+
+# TracePushConfig is the relative path of the push config.
+# This second config contains credentials for where and how often to
+# push trace data to. For example, if the config is next to this config,
+# it would be "push_config.json".
+trace_push_config = ""
+
+# The tracer pull address specifies which address will be used for pull based
+# event collection. If empty, the pull based server will not be started.
+trace_pull_address = ""
+
+# The tracer to use for collecting trace data.
+trace_type = "noop"
+
+# The size of the batches that are sent to the database.
+trace_push_batch_size = 1000
+
+# The list of tables that are updated when tracing. All available tables and
+# their schema can be found in the pkg/trace/schema package. It is represented as a
+# comma separate string. For example: "consensus_round_state,mempool_tx".
+tracing_tables = "mempool_tx,mempool_peer_state,consensus_round_state,consensus_block_parts,consensus_block,consensus_vote,consensus_state,consensus_proposal,peers,pending_bytes,received_bytes,abci"
+
+# The URL of the pyroscope instance to use for continuous profiling.
+# If empty, continuous profiling is disabled.
+pyroscope_url = ""
+
+# When true, tracing data is added to the continuous profiling
+# performed by pyroscope.
+pyroscope_trace = false
+
+# pyroscope_profile_types is a list of profile types to be traced with
+# pyroscope. Available profile types are: cpu, alloc_objects, alloc_space,
+# inuse_objects, inuse_space, goroutines, mutex_count, mutex_duration,
+# block_count, block_duration.
+pyroscope_profile_types = ["cpu", "alloc_objects", "inuse_objects", "goroutines", "mutex_count", "mutex_duration", "block_count", "block_duration", ]
+