diff --git a/_docs/installation/tldr.md b/_docs/installation/tldr.md
deleted file mode 100644
index 6ac8b6a..0000000
--- a/_docs/installation/tldr.md
+++ /dev/null
@@ -1,153 +0,0 @@
----
-layout: book
-title: TL;DR
-section: 2.1
----
-
-You should really read the proper installation documentation. While the
-extent of it may seem somewhat intimidating, that's only because Chimera
-covers a lot of platforms and potential layouts/setups.
-
-The actual installation should be very easy, even if it's manual. In any
-case, here are a few TL;DR basic setups, in the form of a command sequence.
-The setups are intentionally variable and should often not be used as-is,
-as every computer is a little different and may have different disk names,
-swap sizes, and so on.
-
-Multi-boot is not covered here.
-
-## Any UEFI, NVMe, local install, GNOME image, whole disk, unencrypted
-
-This will install Chimera from the GNOME image with the GNOME desktop,
-using a whole NVMe disk, on an ordinary (usually x86_64) UEFI computer.
-An 8GB swap partition will be used.
-
-The same instructions will work on any UEFI machine, but `grub-x86_64-efi`
-will need to be changed to `grub-arm64-efi` or whichever the user needs.
-
-```
-# wipefs -a /dev/nvme0n1
-# sfdisk /dev/nvme0n1 <<EOF
-label: gpt
-name=esp, size=100M, type="EFI System"
-name=swap, size=8G, type="Linux swap"
-name=root
-EOF
-# mkfs.vfat /dev/nvme0n1p1
-# mkswap /dev/nvme0n1p2
-# mkfs.ext4 /dev/nvme0n1p3
-# mkdir /media/root
-# mount /dev/nvme0n1p3 /media/root
-# mkdir -p /media/root/boot/efi
-# mount /dev/nvme0n1p1 /media/root/boot/efi
-# chmod 755 /media/root
-# chimera-bootstrap -l /media/root
-# chimera-chroot /media/root
-## apk update
-## apk upgrade --available
-## apk fix
-## apk add linux-lts grub-x86_64-efi
-## swapon /dev/nvme0n1p2
-## genfstab -t PARTLABEL / > /etc/fstab
-## passwd root
-## useradd myuser
-## passwd myuser
-## usermod -a -G wheel myuser
-## echo mycomputer > /etc/hostname
-## ln -sf ../usr/share/zoneinfo/Europe/Prague /etc/localtime
-## dinitctl -o enable gdm
-## dinitctl -o enable chrony
-## dinitctl -o enable networkmanager
-## update-initramfs -c -k all
-## grub-install --efi-directory=/boot/efi
-## update-grub
-## exit
-# reboot
-```
-
-## OpenPOWER POWER9, sda1, network install, base image, desktop, LVM on LUKS
-
-This will install Chimera with GNOME desktop from the console image using
-the network and will use LUKS encryption with LVM on top, on a POWER9 computer
-such as the Talos 2. It is assumed that the live session is on the network.
-A SATA drive will be used (`sda1`). The 8GB swap is added in the LVM.
-
-```
-# wipefs -a /dev/sda
-# sfdisk /dev/sda <<EOF
-label: gpt
-name=boot, size=2G, type="Linux extended boot"
-name=luks
-EOF
-# mkfs.ext4 /dev/sda1
-# cryptsetup luksFormat /dev/sda2
-# cryptsetup luksOpen /dev/sda2 crypt
-# vgcreate volg /dev/mapper/crypt
-# lvcreate --name swap -L 8G volg
-# lvcreate --name root -l 100%free volg
-# mkswap /dev/volg/swap
-# mkfs.ext4 /dev/volg/root
-# mkdir /media/root
-# mount /dev/volg/root /media/root
-# mkdir /media/root/boot
-# mount /dev/sda1 /media/root/boot
-# chmod 755 /media/root
-# chimera-bootstrap /media/root base-full gnome
-# chimera-chroot /media/root
-## apk update
-## apk add linux-lts grub cryptsetup-scripts lvm2
-## swapon /dev/volg/swap
-## genfstab -t PARTLABEL / > /etc/fstab
-## echo crypt /dev/sda2 none luks,discard > /etc/crypttab
-## passwd root
-## useradd myuser
-## passwd myuser
-## usermod -a -G wheel myuser
-## echo mycomputer > /etc/hostname
-## ln -sf ../usr/share/zoneinfo/Europe/Prague /etc/localtime
-## dinitctl -o enable gdm
-## dinitctl -o enable chrony
-## dinitctl -o enable networkmanager
-## update-initramfs -c -k all
-## mkdir /boot/grub
-## update-grub
-## exit
-# reboot
-```
-
-## x86_64 legacy BIOS, sda1, root on ZFS, network install, console
-
-This will install Chimera with pure console environment using the network,
-and will put root filesystem on ZFS. The `/boot` filesystem will be separate.
-No swap will be used.
-
-```
-# wipefs -a /dev/sda
-# sfdisk /dev/sda <<EOF
-label: dos
-name=boot, size=2G, bootable, type=b
-name=root
-EOF
-# mkfs.ext4 /dev/sda1
-# mkdir /media/root
-# zpool create -o ashift=12 -O acltype=posixacl -O canmount=off -O dnodesize=auto -O relatime=on -O xattr=sa -O mountpoint=/ -R /media/root rpool /dev/sda2
-# zfs create -o canmount=off -o mountpoint=none rpool/ROOT
-# zfs create -o canmount=noauto -o mountpoint=/ rpool/ROOT/chimera
-# zfs mount rpool/ROOT/chimera
-# mkdir /media/root/boot
-# mount /dev/sda1 /media/root/boot
-# chmod 755 /media/root
-# chimera-bootstrap /media/root
-# chimera-chroot /media/root
-## apk update
-## apk add zfs linux-lts linux-lts-zfs-bin grub-i386-pc
-## passwd root
-## echo mycomputer > /etc/hostname
-## ln -sf ../usr/share/zoneinfo/Europe/Prague /etc/localtime
-## dinitctl -o enable dhcpcd
-## update-initramfs -c -k all
-## grub-install /dev/sda
-## update-grub
-## exit
-# reboot
-```