ansible.md

Ansible

Installing Ansible

Kubespray supports multiple ansible versions and ships different requirements.txt files for them. Depending on your available python version you may be limited in choosing which ansible version to use.

It is recommended to deploy the ansible version used by kubespray into a python virtual environment.

VENVDIR=kubespray-venv
KUBESPRAYDIR=kubespray
ANSIBLE_VERSION=2.12
virtualenv  --python=$(which python3) $VENVDIR
source $VENVDIR/bin/activate
cd $KUBESPRAYDIR
pip install -U -r requirements-$ANSIBLE_VERSION.txt
test -f requirements-$ANSIBLE_VERSION.yml && \
  ansible-galaxy role install -r requirements-$ANSIBLE_VERSION.yml && \
  ansible-galaxy collection -r requirements-$ANSIBLE_VERSION.yml

Ansible Python Compatibility

Based on the table below and the available python version for your ansible host you should choose the appropriate ansible version to use with kubespray.

Ansible Version	Python Version
2.11	2.7,3.5-3.9
2.12	3.8-3.10

Inventory

The inventory is composed of 3 groups:

• kube_node : list of kubernetes nodes where the pods will run.
• kube_control_plane : list of servers where kubernetes control plane components (apiserver, scheduler, controller) will run.
• etcd: list of servers to compose the etcd server. You should have at least 3 servers for failover purpose.

Note: do not modify the children of k8s_cluster, like putting the etcd group into the k8s_cluster, unless you are certain to do that and you have it fully contained in the latter:

etcd ⊂ k8s_cluster => kube_node ∩ etcd = etcd

When kube_node contains etcd, you define your etcd cluster to be as well schedulable for Kubernetes workloads. If you want it a standalone, make sure those groups do not intersect. If you want the server to act both as control-plane and node, the server must be defined on both groups kube_control_plane and kube_node. If you want a standalone and unschedulable control plane, the server must be defined only in the kube_control_plane and not kube_node.

There are also two special groups:

• calico_rr : explained for advanced Calico networking cases
• bastion : configure a bastion host if your nodes are not directly reachable

Below is a complete inventory example:

## Configure 'ip' variable to bind kubernetes services on a
## different ip than the default iface
node1 ansible_host=95.54.0.12 ip=10.3.0.1
node2 ansible_host=95.54.0.13 ip=10.3.0.2
node3 ansible_host=95.54.0.14 ip=10.3.0.3
node4 ansible_host=95.54.0.15 ip=10.3.0.4
node5 ansible_host=95.54.0.16 ip=10.3.0.5
node6 ansible_host=95.54.0.17 ip=10.3.0.6

[kube_control_plane]
node1
node2

[etcd]
node1
node2
node3

[kube_node]
node2
node3
node4
node5
node6

[k8s_cluster:children]
kube_node
kube_control_plane

Group vars and overriding variables precedence

The group variables to control main deployment options are located in the directory inventory/sample/group_vars. Optional variables are located in the inventory/sample/group_vars/all.yml. Mandatory variables that are common for at least one role (or a node group) can be found in the inventory/sample/group_vars/k8s_cluster.yml. There are also role vars for docker, kubernetes preinstall and control plane roles. According to the ansible docs, those cannot be overridden from the group vars. In order to override, one should use the -e runtime flags (most simple way) or other layers described in the docs.

Kubespray uses only a few layers to override things (or expect them to be overridden for roles):

Layer	Comment
role defaults	provides best UX to override things for Kubespray deployments
inventory vars	Unused
inventory group_vars	Expects users to use all.yml,k8s_cluster.yml etc. to override things
inventory host_vars	Unused
playbook group_vars	Unused
playbook host_vars	Unused
host facts	Kubespray overrides for internal roles' logic, like state flags
play vars	Unused
play vars_prompt	Unused
play vars_files	Unused
registered vars	Unused
set_facts	Kubespray overrides those, for some places
role and include vars	Provides bad UX to override things! Use extra vars to enforce
block vars (only for tasks in block)	Kubespray overrides for internal roles' logic
task vars (only for the task)	Unused for roles, but only for helper scripts
extra vars (always win precedence)	override with ansible-playbook -e @foo.yml

Ansible tags

The following tags are defined in playbooks:

Tag name	Used for
annotate	Create kube-router annotation
apps	K8s apps definitions
asserts	Check tasks for download role
aws-ebs-csi-driver	Configuring csi driver: aws-ebs
azure-csi-driver	Configuring csi driver: azure
bastion	Setup ssh config for bastion
bootstrap-os	Anything related to host OS configuration
calico	Network plugin Calico
calico_rr	Configuring Calico route reflector
canal	Network plugin Canal
cephfs-provisioner	Configuring CephFS
cert-manager	Configuring certificate manager for K8s
cilium	Network plugin Cilium
cinder-csi-driver	Configuring csi driver: cinder
client	Kubernetes clients role
cloud-provider	Cloud-provider related tasks
cluster-roles	Configuring cluster wide application (psp ...)
cni	CNI plugins for Network Plugins
containerd	Configuring containerd engine runtime for hosts
container_engine_accelerator	Enable nvidia accelerator for runtimes
container-engine	Configuring container engines
container-runtimes	Configuring container runtimes
coredns	Configuring coredns deployment
crio	Configuring crio container engine for hosts
crun	Configuring crun runtime
csi-driver	Configuring csi driver
dashboard	Installing and configuring the Kubernetes Dashboard
dns	Remove dns entries when resetting
docker	Configuring docker engine runtime for hosts
download	Fetching container images to a delegate host
etcd	Configuring etcd cluster
etcd-secrets	Configuring etcd certs/keys
etchosts	Configuring /etc/hosts entries for hosts
external-cloud-controller	Configure cloud controllers
external-openstack	Cloud controller : openstack
external-provisioner	Configure external provisioners
external-vsphere	Cloud controller : vsphere
facts	Gathering facts and misc check results
files	Remove files when resetting
flannel	Network plugin flannel
gce	Cloud-provider GCP
gcp-pd-csi-driver	Configuring csi driver: gcp-pd
gvisor	Configuring gvisor runtime
helm	Installing and configuring Helm
ingress-controller	Configure ingress controllers
ingress_alb	AWS ALB Ingress Controller
init	Windows kubernetes init nodes
iptables	Flush and clear iptable when resetting
k8s-pre-upgrade	Upgrading K8s cluster
k8s-secrets	Configuring K8s certs/keys
k8s-gen-tokens	Configuring K8s tokens
kata-containers	Configuring kata-containers runtime
krew	Install and manage krew
kubeadm	Roles linked to kubeadm tasks
kube-apiserver	Configuring static pod kube-apiserver
kube-controller-manager	Configuring static pod kube-controller-manager
kube-vip	Installing and configuring kube-vip
kubectl	Installing kubectl and bash completion
kubelet	Configuring kubelet service
kube-ovn	Network plugin kube-ovn
kube-router	Network plugin kube-router
kube-proxy	Configuring static pod kube-proxy
localhost	Special steps for the localhost (ansible runner)
local-path-provisioner	Configure External provisioner: local-path
local-volume-provisioner	Configure External provisioner: local-volume
macvlan	Network plugin macvlan
master	Configuring K8s master node role
metallb	Installing and configuring metallb
metrics_server	Configuring metrics_server
netchecker	Installing netchecker K8s app
network	Configuring networking plugins for K8s
mounts	Umount kubelet dirs when reseting
multus	Network plugin multus
nginx	Configuring LB for kube-apiserver instances
node	Configuring K8s minion (compute) node role
nodelocaldns	Configuring nodelocaldns daemonset
node-label	Tasks linked to labeling of nodes
node-webhook	Tasks linked to webhook (grating access to resources)
nvidia_gpu	Enable nvidia accelerator for runtimes
oci	Cloud provider: oci
persistent_volumes	Configure csi volumes
persistent_volumes_aws_ebs_csi	Configuring csi driver: aws-ebs
persistent_volumes_cinder_csi	Configuring csi driver: cinder
persistent_volumes_gcp_pd_csi	Configuring csi driver: gcp-pd
persistent_volumes_openstack	Configuring csi driver: openstack
policy-controller	Configuring Calico policy controller
post-remove	Tasks running post-remove operation
post-upgrade	Tasks running post-upgrade operation
pre-remove	Tasks running pre-remove operation
pre-upgrade	Tasks running pre-upgrade operation
preinstall	Preliminary configuration steps
registry	Configuring local docker registry
reset	Tasks running doing the node reset
resolvconf	Configuring /etc/resolv.conf for hosts/apps
rbd-provisioner	Configure External provisioner: rdb
services	Remove services (etcd, kubelet etc...) when resetting
snapshot	Enabling csi snapshot
snapshot-controller	Configuring csi snapshot controller
upgrade	Upgrading, f.e. container images/binaries
upload	Distributing images/binaries across hosts
vsphere-csi-driver	Configuring csi driver: vsphere
weave	Network plugin Weave
win_nodes	Running windows specific tasks
youki	Configuring youki runtime

Note: Use the bash scripts/gen_tags.sh command to generate a list of all tags found in the codebase. New tags will be listed with the empty "Used for" field.

Example commands

Example command to filter and apply only DNS configuration tasks and skip everything else related to host OS configuration and downloading images of containers:

ansible-playbook -i inventory/sample/hosts.ini cluster.yml --tags preinstall,facts --skip-tags=download,bootstrap-os

And this play only removes the K8s cluster DNS resolver IP from hosts' /etc/resolv.conf files:

ansible-playbook -i inventory/sample/hosts.ini -e dns_mode='none' cluster.yml --tags resolvconf

And this prepares all container images locally (at the ansible runner node) without installing or upgrading related stuff or trying to upload container to K8s cluster nodes:

ansible-playbook -i inventory/sample/hosts.ini cluster.yml \
    -e download_run_once=true -e download_localhost=true \
    --tags download --skip-tags upload,upgrade

Note: use --tags and --skip-tags wise and only if you're 100% sure what you're doing.

Bastion host

If you prefer to not make your nodes publicly accessible (nodes with private IPs only), you can use a so called bastion host to connect to your nodes. To specify and use a bastion, simply add a line to your inventory, where you have to replace x.x.x.x with the public IP of the bastion host.

[bastion]
bastion ansible_host=x.x.x.x

For more information about Ansible and bastion hosts, read Running Ansible Through an SSH Bastion Host

Mitogen

Mitogen support is deprecated, please see mitogen related docs for usage and reasons for deprecation.

Beyond ansible 2.9

Ansible project has decided, in order to ease their maintenance burden, to split between two projects which are now joined under the Ansible umbrella.

Ansible-base (2.10.x branch) will contain just the ansible language implementation while ansible modules that were previously bundled into a single repository will be part of the ansible 3.x package. Pleasee see this blog post that explains in detail the need and the evolution plan.

Note: this change means that ansible virtual envs cannot be upgraded with pip install -U. You first need to uninstall your old ansible (pre 2.10) version and install the new one.

pip uninstall ansible ansible-base ansible-core
cd kubespray/
pip install -U .