wemos d1 issues

[toremaannn]

Hi I am having trouble with getting espusb to work. I have managed to get the software to work. (I think) The website is working an "Messages: is increasing when I reload the side. But when I am unable to send key strokes to the computer

When I connect it to a ubuntu machine I am seeing this in the dmesg

[ 8670.728659] usb 2-2: device descriptor read/64, error -71 [ 8670.836665] usb usb2-port2: attempt power cycle [ 8671.488592] usb 2-2: new full-speed USB device number 73 using xhci_hcd [ 8671.488807] usb 2-2: Device not responding to setup address. [ 8671.696671] usb 2-2: Device not responding to setup address. [ 8671.904508] usb 2-2: device not accepting address 73, error -71 [ 8672.032503] usb 2-2: new full-speed USB device number 74 using xhci_hcd [ 8672.032658] usb 2-2: Device not responding to setup address. [ 8672.240634] usb 2-2: Device not responding to setup address. [ 8672.448482] usb 2-2: device not accepting address 74, error -71 [ 8672.448550] usb usb2-port2: unable to enumerate USB device

When I plug it in a windows machine it is recognized as a unknown device

Hardware is not my strongest side, but I really need this to work

Her is some pictures of how I have connected the HW
https://photos.app.goo.gl/QQ4c7XgAZnopFRRw5

Can someone point me in the right directions.

[enricolam]

I got 404 for the link u provide

[toremaannn]

Fixed the link

[cnlohr]

It "looks" like a wiring problem ,like d+/d- are flipped or you have a resistor on the wrong leg.

[cnlohr]

Whoops responded before looking at the pics. Looking now.

[cnlohr]

I am unfamiliar with the pinout of the Wemos. can you draw me a rough schematic (even if it's just ms paint)?

[toremaannn]

I had the resistor on the wrong leg. Thank you very much!!