Skip to content

Latest commit

 

History

History
110 lines (87 loc) · 3.3 KB

README.md

File metadata and controls

110 lines (87 loc) · 3.3 KB
Raw

zWireshark

Produces a network trace file from TCPIP on z/OS which Wireshark can use. For example example of a ping to z/OS

Capturing a trace

The TCPTRACE modules uses a documented TCPIP interface to collect packet trace data. It writes it to a file which can be downloaded and used as input to wireshark.

You can run it as a batchjob or as a started task. The userid running the program needs access to a SERVAUTH profile. When I ran it without permission I got

   ICH408I USER(START1  ) GROUP(SYS1    ) NAME(####################)
     EZB.TRCCTL.S0W1.TCPIP.OPEN CL(SERVAUTH)                        
     INSUFFICIENT ACCESS AUTHORITY                                  
     FROM EZB.TRCCTL.*.*.* (G)                                      
     ACCESS INTENT(READ   )  ACCESS ALLOWED(NONE   )

You need to define a specify profile or a generic profile EZB.TRCCTL...* in class SERVAUTH and give the userid read access to it. See SAF resource names for NMI resources.

JCL to execute the program

//COLINC5    JOB 1,MSGCLASS=H,COND=(4,LE) RESTART=RUN 
// SET LOADLIB=COLIN.ZWIRESHA.LOAD 
//RUN      EXEC PGM=TCPTRACE,REGION=0M,PARMDD=MYPARMS 
//STEPLIB  DD DISP=SHR,DSN=&LOADLIB 
//SYSPRINT DD SYSOUT=*,DCB=(LRECL=200) 
//SYSOUT   DD SYSOUT=* 
//SYSERR   DD SYSOUT=* 
//PCAP     DD PATH='/tmp/x.pcap', 
//            PATHOPTS=(OWRONLY,OCREAT,OTRUNC), 
//            PATHMODE=SIRWXU 
//MYPARMS DD * 
/
 --WAIT 60 
 --INTERFACE TAP0 
 --PAYLOAD 1024 
 --DEBUG 0 
/* 
 --COUNT 1000 
 --IP   10.1.1.2 
 --IPV6 2001:db8::22b1:8b3:5051:d8db 
 --PORT 80 
//

Where the parameters are (in upper case)

--WAIT : wait for the specified number of seconds before ending

--INTERFACE : which TCPIP interface to trace

--IP : which IP V4 address to trace, in format 10.1.1.2

--IPV6 : which IPV6 interface to trace, in format 2001:db8:8::9

--PORT : which local port value to trace

--COUNT : The number of records to trace before ending

--DEBUG : If the value is greater than 0, it display additional information

You should specify one of --INTERFACE, --IP, --IPV6, --PORT.

Output file

The output file is written to the file in //PCAP.

Download it to your work station in binary.

Stopping the program

The program sits in a loop waiting for trace records, or until it times out. You can stop it before it times out using the operator command

p COLINC5

The program listens for this, and shuts down.

Installation

FTP the load/COLIN.ZWIRESHA.LOAD.XMIT to z/OS. For example using

site quote  cyl pri=1 recfm=fb blksize=800 lrecl=80
bin
put COLIN.ZWIRESHA.LOAD.XMIT 'myid.ZWIRESHA.LOAD.XMIT'
quit

then use

tso receive indsn('myid.ZWIRESHA.LOAD.XMIT')

Change history

  • 2024 Feb 24: Version 1.1 Add interface name to the printed output
  • 2024 Feb 24: Version 1.1 Add copyright and version to the load module
  • 2024 Feb 25: Version 1.1 Fix problem in printhex caused by invalid length being used. Simplify the write code.
  • 2024 July 6: Fix documentation problems
  • 2024 Oct 8: Used Locate mode instead of Move mode to allow for big buffers.
  • 2024 Oct 8: Fixed documentation problems with the wrong command options specified.