-
-
Notifications
You must be signed in to change notification settings - Fork 503
Compatible devices (HTTPS firmware)
The following devices are produced by Tuya and can be flashed with third-party firmware. It is recommended that you make a backup of the factory firmware in the event that you need to revert to it should the third-party firmware not function properly with your device.
Since Tasmota version 6.4.1.16, the firmware supports templates for configuring unsupported devices. Templates are easily configurable using the web UI. It is recommended to use templates instead of changing Generic Module (18)
GPIO assignments. Tasmota Device Templates Repository maintains a list of templates for Tasmota as well as a list of unsupported devices (ones without and ESP82xx chip). There are numerous devices based on Tuya Wi-Fi modules. It may not be possible for all of them to work as expected with Tasmota. If you have a new device that does not have an existing template, you may refer to Configure Unknown Device guide to configure the device.
Success? | Vendor | Area | Device Name | GPIOs | Picture | Notes |
---|---|---|---|---|---|---|
Yes | Anoopsyche | EU | AWP08L | GPIO 04: Button1. GPIO 05: LED1 inverted. GPIO 12: Relay1. | 16A 3680W. Ordered in July 2019 from Amazon. Attention: different GPIO-Layout than AWP08L plug sold in france. | |
Yes | AOFO | UK | ZLD-44UK-W | 0,56,0,17,23,24,0,0,22,21,33,0,0 | Ordered in January 2020 from Amazon. | |
Yes | Yagala | UK | SWB3 | 0,0,53,0,0,23,0,0,21,0,22,24,0 | Sep. 2020 Amazon. | |
Yes | Aoycocr | US | X5P | 56,0,57,0,0,0,0,0,0,17,0,21,0 / GPIO00:Led1i, GPIO02:Led2i, GPIO13:Button1, GPIO15:Relay1 | Ordered Dec. 2019 from Amazon | |
Yes | AVATTO | EU | JH-G01E | 1:CSE7766Tx, 3:CSE7766Rx, 12:Button1, 13:Led1i, 14:Relay1 | ||
No | AVATTO | EU | Mini, NAS-WR01W | 2020 Nov, First phase of autoconfig restarts socket, but intermediate firmware not loaded | ||
Yes | Bakibo | EU | TP2201 | Use "Teckin" module | ||
Yes | BlitzWolf | CN | BW-SHP5 | |||
Yes | BlitzWolf | CN | BW-SHP6 | |||
Yes | BlitzWolf | DE | BW-SHP7 | |||
Yes | BlitzWolf | DE | BW-SHP10 | D/C 4620 & 0521 | ||
No | BN-Link | US | BNC-60 | Units shipping from Amazon as of October 2020 are not flashable. Manually flashing requires fullly desoldering the ESP8285 daughterboard. | ||
Yes | Brilliant | AU | Smart Wifi Plug and USB Charger 20676/05 | 5: Relay1, 13: Led1i, 14: Button1 | ||
Yes | CE (Costco) | CA | Wifi power bar LTS-6A-W5 | 0: LED1i, 14: Relay1 (Left), 12: Relay2, 13: Relay3, 4: Relay4, 5: Relay5, 16: Button1i | ||
No | Dwfeng | US | Amazon Wifi smart plug 2 packs | GPIOs | Previously reported as working, but units purchased in December 2019 were based on Realtek chips, not ESPs | |
Yes | Gosund | EU | SP1 | |||
Yes | Gosund | EU | SP111 | Original version with 2300W max | ||
Yes | Gosund | EU | SP111 v2 | "New" version of the SP111, 3450W max | ||
Yes | Gosund | UK | UP111 | Purchased from Amazon in November 2020, 2990W | ||
No | Gosund | EU | SP112 | Previously reported as working but a July 2020 Amazon order came with a new firmware that prevents flashing via tuya-convert | ||
Yes | Generic | EU | ebay Mini Smart Socket - RGBW, USB | LED night-light with USB charging socket and 10A relay | ||
No | Generic | UK | Smart Plug with Energy Monitoring - G type plug | Purchased in UAE, Tuya-Convert failed with logs saying it isn't ESP82xx-based. | ||
Yes* | LSC | EU | Power Plug | 0,255,0,255,56,0,0,0,21,0,17,0,0 | The new versions do not have an ESP chip and are NOT supported! | |
Yes | Luminea | EU | NX-4491 | Configure by Template; 2: LED1i, 13: Button1, 15: Relay1 | Sold by Pearl as "SF-450.avs" | |
Yes | Medion | AU | Smart Plug S85225 | 3:Button1, 4:BL0937CF, 5:HLWBLCF1, 12:HLWBL SELi, 13: Led1i, 14: Relay1 | ||
Yes | Neo | EU | Coolcam 16A | |||
No | Nooie | US | PA10 | UNSUPPORTED: Non-ESP chip (RTL8710BN) | ||
No* | Teckin | EU | SP21 | *New version with non-ESP chip on the market | ||
Yes* | Teckin | EU | SP22 | *New version with non-ESP chip on the market | ||
Yes | Teckin | UK | SP23-2-D | |||
Yes | Teckin | US | SS31 | 4:Led1i, 5:Led2i, 12:Relay1, 13:Button1, 14:Relay2, | SS31 Template | |
Yes | Teckin | EU | SS42 | |||
No | Teckin | CA | SP10 | Not using ESP82XX, FW 1.0.3, Previous version has been seen with ESP | ||
No* | Teckin | UK | SP27 | Rapid flashes for a long time without Tuya-Convert. Rapid flashing stops, no progress, with Tuya-Convert. *Have not done a tear down to determine module. | ||
Yes | Vivitar | US | HA-7001 | 0: LED1i, 4: Relay2i, 5: Button1, 12: Relay4i, 13: Relay3i, 14: Relay5i, 16: Relay1 | ||
No | ZooZee | EU | SE131 | Not using ESP82XX | ||
No | Generic | CN | AWP08L-like | - | Similar as AWP08L from AliExpress (shop smartgorilla dropshipping Store). Failed as not using ESP chip. May be newer version. | |
Yes | Espressi | UK | TP24 |
Success? | Vendor | Area | Device Name | GPIOs | Picture | Notes |
---|---|---|---|---|---|---|
Yes | Iotton | US | Iotton Smart Light Bulb | 0,0,0,0,37,38,0,0,0,0,0,0,0 | Tasmota template: {"NAME":"Iotton Light","GPIO":[0,0,0,0,37,38,0,0,0,0,0,0,0],"FLAG":0,"BASE":18}
|
|
No | Teckin | UK | SB50 | 255,255,255,255,37,255,255,255,38,40,39,255,255 | Firmware sold after September 2020 not vulnerable, earlier firmware did work. | |
Yes | Bneta | ZA | A60/IO-WIFI-GU10 | 255,255,255,255,140,37,0,0,38,142,141,255,255 | ||
Yes | Bneta | ZA | IO-WIFI60-E27P | 255,255,255,255,37,41,255,255,38,40,39,255,255 | ||
Yes | Feit | US | BPA800/RGBW/AG/2(P) | 255,255,255,255,37,38,255,255,141,142,140,255,255 | Used tuya-convert development branch from commit 69ea7d3d2604e00c195c615223085bba3dd605f4 #6534Tasmota Template | |
Yes | Generic | EU | darty Onearz Connect OECO_LB9WCCT | 0,0,0,0,140,37,0,0,38,142,141,0,0 | darty link | |
Yes | Generic (also Avatar) | EU | RGBCW GU10 | 0,255,0,255,40,0,0,0,38,39,37,0,0 | Works before firmware 1.0.2, LEDs turn on full brightness when no PWM signal is given (power on), see ebay link amazon link | |
No | LOHAS | EU | Filament GU 10 | X0013YZ1OP | ||
Yes | LSC | EU | Filament E14 | 0,255,0,255,0,0,0,0,38,0,37,0,0 | ||
Yes | LSC | EU | Filament M E27 | 0,255,0,255,0,0,0,0,38,0,37,0,0 | ||
Yes | LSC | EU | Filament L E27 | 0,255,0,255,0,0,0,0,38,0,37,0,0 | ||
Yes | LSC | EU | Filament XL E27 | 0,255,0,255,0,0,0,0,38,0,37,0,0 | ||
Yes | LSC | EU | Filament XXL E27 | 0,255,0,255,0,0,0,0,38,0,37,0,0 | ||
Yes | LSC | EU | RGBW E14 | 0,255,0,255,0,0,0,0,181,0,180,0,0 | See #6495 | |
Yes | LSC | EU | RGBW GU10 | 0,255,0,255,0,0,0,0,181,0,180,0,0 | See #6495 | |
No | LSC | EU | W GU10 | n/a | Unknown | |
No | LSC | EU | RGBW E27 | n/a | Contains RTL8710BN | |
No | LSC | EU | Ceiling Fixture W | n/a | Contains RTL8710BN, but easily replaceable with ESP-12 | |
No | LSC | EU | Ceiling Fixture RGBCCT | 0,255,0,255,0,0,0,0,181,0,180,0,0 | Contains TYCL5 & SM2135 | |
Yes | Teckin | EU | SP50 Smart RGB Bulb E27 | uses Protocol 2.2 | ||
Yes | Brilliant | EU | RGBW E14 HK17653S72 | 255,255,255,255,37,40,255,255,38,255,39,255,255 | ||
No | Twoon | US | XZ-190 | says not ESP chip in logs | Amazon | |
Yes | Novostella | US | HM-FL36-RGBCW-US-2/RGBCW | 0,0,0,0,37,40,0,0,38,41,39,0,0 | Tasmota Template To enter pairing mode turn the device on, off, on, off, on | |
No | LUMIMAN | US | LM530 | Flashing hangs after initial firmware uploads. Other folks mentioned progress using this method on other devices, but I was not successful. | ||
No | NiteBird | US | TT-WB4 | 0,0,0,0,40,0,0,0,37,38,39,0,0 | Ordered from Amazon. Firmware sold after September 2020 not vulnerable, earlier firmware did work | |
NO! | Miboxer | Aliexpress | WL5 | Unsupported, based on WR3 RTL8710BN | ||
Yes | Elari | RU | SmartLED Filament E27 | [0,0,0,0,0,0,0,0,56,0,46,0,0,0] | To enter pairing mode switch on and off 5 times | |
No | LVWIT | EU | GU10 RGB+CCT 5W 350lm | firmware sold after Jun 2020 not vulnerable | ||
No | LVWIT | EU | E14 RGB+CCT 5W 470lm | firmware sold after Jun 2020 not vulnerable, earlier firmware did work | ||
No | LVWIT | EU | E27 A60 RGB+CCT 8.5W 806lm | firmware sold after Jun 2020 not vulnerable, earlier firmware did work | ||
No | Brizlabs | EU | E14 RGB+WW 5W 350lm | firmware sold after Jun 2020 not vulnerable, earlier firmware did work | ||
No | LedLite | UK | GU10 RGB+WW 4W 300lm | Issue logged: https://github.com/ct-Open-Source/tuya-convert/issues/817 | ||
No | AISIRER | EU | E27 RGB 10W 1000lm | Bought in Dec 2020, has WB3L chip, cannot disassemble without destroying |
Success? | Vendor | Area | Device Name | GPIOs | Picture | Notes |
---|---|---|---|---|---|---|
Yes | LSC | EU | 970750 | 51,255,255,255,37,255,255,255,38,40,39,255,255 | IR Rules |
Success? | Vendor | Area | Device Name | GPIOs | Picture | Notes |
---|---|---|---|---|---|---|
Yes | MoesHouse | CN | MS-105 (rev.2?) | GPIO01 = TuyaTX (107), GPIO03 = TuyaRX (108) | This 1 Gang Dimmer looks different from most sources I could find. | |
Yes | Generic | UK | 4 gang WiFi Switch (No Neutral) | TuyaMCU | Flash completed successfully, set up Tasmota in TuyaMCU mode | |
Yes | Jinvoo | EU | Curtain WiFi Switch | 52,0,0,10,22,11,0,0,9,21,0,23,0 | Issue this in console: SwitchMode 3 - Interlock 1 - LedPower 0 - SetOption31 1 - PulseTime1 130 (amount of seconds for curtain movement + 100 i.e. 30sec + 100 = 130) - PulseTime2 1 - Pulsetime3 130 (amount of seconds for curtain movement + 100 i.e. 30sec + 100 = 130) - SaveOption 1 | |
Yes | Jinvoo | EU | 1 gang WiFi Switch | 52,0,0,0,0,0,0,0,9,21,0,0,0 | ||
Yes | Jinvoo | EU | 2 gang WiFi Switch | 52,0,0,10,22,0,0,0,9,21,0,0,0 | ||
Yes | Jinvoo | EU | 3 gang WiFi Switch | 52,0,0,10,22,11,0,0,9,21,0,23,0 | ||
Yes | Whpuliao | EU | Bulb Socket | 17,255,0,255,0,0,0,0,21,56,0,0,0 | Module type: Slampher (9) tested successfully with tasmota 7.0.0.3 |
Success? | Vendor | Area | Device Name | GPIOs | Picture | Notes |
---|---|---|---|---|---|---|
No | Arlec | AU | Grid Connect 40cm SMART Pedestal Fan | Does not use ESP82XX | ||
Yes | Geek Aire | US | Geek Aire Fan, Air Circulator | TuyaMCU |
Success? | Vendor | Area | Device Name | GPIOs | Picture | Notes |
---|---|---|---|---|---|---|
No | LSC | EU | Siren | n/a | Contains RTL8710BN, but easily replaceable with ESP-12 | |
Yes | LSC | EU | Smart Movement Sensor (5 meters) V1.0 | unknown | Flashing OTA works, but decouple the battery and power the board with 3.3V & GND to prevent deep sleep. | |
Yes | Generic | EU | Wi-Fi Smart IR Controller SRW-001 (I bought it from AliExpress) | The YTF IR Bridge Tasmota module works perfectly | Please make sure you upgrade the Tasmota firmware to Tasmota-IR | |
Yes | Moes/Beca | EU | MOES WiFi Smart Thermostat (BHT-002-GCLW) My variant was: 5A for boiler heating white | N/A | Use tuya-convert to flash this firmware: https://github.com/klausahrenberg/WThermostatBeca Tasmota will NOT work. | |
No | Tuya | EU | TY01 | n/a | TY01 Door Window Contact Sensor, offline after intermediate reboot |