You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
I have been struggling with a em7511, no matter the situation, i can't get the thing to work in a cradlepoint, only in mbim it works, and somehow connects over 3g sprint? i began to try different comp modes, in windows i was able to get mbim to connect properly, but never on the cradlepoint, the last command i entered was usbcomp=1,1,10D, which is mbim (the 1 for this modem) and 10D, which is qmi, and now i can't get a modem interface, i have tried linux, and when attempting to flash, there is no cdc-mdm or ttyUSB devices. in windows, the usbcomp=8 does nothing after scrubing my pc, it shows as com3/4 in windows as a wwan modem, and i see a snapdragon x16 in unable to start, I can get that to start, but is another com port that will not respond to key strokes. the other outputs zeros when i type. i can still flash firmware to it, but never opens the modem port, vid is 90b1, pid 90B0. any recommendations? thanks
reacted with thumbs up emoji reacted with thumbs down emoji reacted with laugh emoji reacted with hooray emoji reacted with confused emoji reacted with heart emoji reacted with rocket emoji reacted with eyes emoji
-
I have been struggling with a em7511, no matter the situation, i can't get the thing to work in a cradlepoint, only in mbim it works, and somehow connects over 3g sprint? i began to try different comp modes, in windows i was able to get mbim to connect properly, but never on the cradlepoint, the last command i entered was usbcomp=1,1,10D, which is mbim (the 1 for this modem) and 10D, which is qmi, and now i can't get a modem interface, i have tried linux, and when attempting to flash, there is no cdc-mdm or ttyUSB devices. in windows, the usbcomp=8 does nothing after scrubing my pc, it shows as com3/4 in windows as a wwan modem, and i see a snapdragon x16 in unable to start, I can get that to start, but is another com port that will not respond to key strokes. the other outputs zeros when i type. i can still flash firmware to it, but never opens the modem port, vid is 90b1, pid 90B0. any recommendations? thanks
Beta Was this translation helpful? Give feedback.
All reactions