[Security] Bump nokogiri from 1.11.1 to 1.11.5

[dependabot-preview]

Bumps nokogiri from 1.11.1 to 1.11.5. This update includes a security fix.

Vulnerabilities fixed

Sourced from The GitHub Security Advisory Database.

Update packaged dependency libxml2 from 2.9.10 to 2.9.12

Summary

Nokogiri v1.11.4 updates the vendored libxml2 from v2.9.10 to v2.9.12 which addresses:

• CVE-2019-20388 (Medium severity)
• CVE-2020-24977 (Medium severity)
• CVE-2021-3517 (Medium severity)
• CVE-2021-3518 (Medium severity)
• CVE-2021-3537 (Low severity)
• CVE-2021-3541 (Low severity)

Note that two additional CVEs were addressed upstream but are not relevant to this release. CVE-2021-3516 via xmllint is not present in Nokogiri, and CVE-2020-7595 has been patched in Nokogiri since v1.10.8 (see #1992).

Please note that this advisory only applies to the CRuby implementation of Nokogiri < 1.11.4, and only if the packaged version of libxml2 is being used. If you've overridden defaults at installation time to use system libraries instead of packaged libraries, you should instead pay attention to your distro's libxml2 release announcements.

Mitigation

Upgrade to Nokogiri >= 1.11.4.

... (truncated)

Affected versions: < 1.11.4

Release notes

Sourced from nokogiri's releases.

1.11.5 / 2021-05-19

Fixed

[Windows CRuby] Work around segfault at process exit on Windows when using libxml2 system DLLs.

libxml 2.9.12 introduced new behavior to avoid memory leaks when unloading libxml2 shared libraries (see libxml/!66). Early testing caught this segfault on non-Windows platforms (see #2059 and libxml@956534e) but it was incompletely fixed and is still an issue on Windows platforms that are using system DLLs.

We work around this by configuring libxml2 in this situation to use its default memory management functions. Note that if Nokogiri is not on Windows, or is not using shared system libraries, it will will continue to configure libxml2 to use Ruby's memory management functions. Nokogiri::VERSION_INFO["libxml"]["memory_management"] will allow you to verify when the default memory management functions are being used. [#2241]

Added

Nokogiri::VERSION_INFO["libxml"] now contains the key "memory_management" to declare whether libxml2 is using its default memory management functions, or whether it uses the memory management functions from ruby. See above for more details.

1.11.4 / 2021-05-14

Security

[CRuby] Vendored libxml2 upgraded to v2.9.12 which addresses:

• CVE-2019-20388
• CVE-2020-24977
• CVE-2021-3517
• CVE-2021-3518
• CVE-2021-3537
• CVE-2021-3541

Note that two additional CVEs were addressed upstream but are not relevant to this release. CVE-2021-3516 via xmllint is not present in Nokogiri, and CVE-2020-7595 has been patched in Nokogiri since v1.10.8 (see #1992).

Please see nokogiri/GHSA-7rrm-v45f-jp64 or #2233 for a more complete analysis of these CVEs and patches.

Dependencies

• [CRuby] vendored libxml2 is updated from 2.9.10 to 2.9.12. (Note that 2.9.11 was skipped because it was superseded by 2.9.12 a few hours after its release.)

1.11.3 / 2021-04-07

Fixed

• [CRuby] Passing non-Node objects to Document#root= now raises an ArgumentError exception. Previously this likely segfaulted. [#1900]
• [JRuby] Passing non-Node objects to Document#root= now raises an ArgumentError exception. Previously this raised a TypeError exception.
• [CRuby] arm64/aarch64 systems (like Apple's M1) can now compile libxml2 and libxslt from source (though we continue to strongly advise users to install the native gems for the best possible experience)

1.11.2 / 2021-03-11

... (truncated)

Changelog

Sourced from nokogiri's changelog.

1.11.5 / 2021-05-19

Fixed

[Windows CRuby] Work around segfault at process exit on Windows when using libxml2 system DLLs.

libxml 2.9.12 introduced new behavior to avoid memory leaks when unloading libxml2 shared libraries (see libxml/!66). Early testing caught this segfault on non-Windows platforms (see #2059 and libxml@956534e) but it was incompletely fixed and is still an issue on Windows platforms that are using system DLLs.

We work around this by configuring libxml2 in this situation to use its default memory management functions. Note that if Nokogiri is not on Windows, or is not using shared system libraries, it will will continue to configure libxml2 to use Ruby's memory management functions. Nokogiri::VERSION_INFO["libxml"]["memory_management"] will allow you to verify when the default memory management functions are being used. [#2241]

Added

Nokogiri::VERSION_INFO["libxml"] now contains the key "memory_management" to declare whether libxml2 is using its default memory management functions, or whether it uses the memory management functions from ruby. See above for more details.

1.11.4 / 2021-05-14

Security

[CRuby] Vendored libxml2 upgraded to v2.9.12 which addresses:

• CVE-2019-20388
• CVE-2020-24977
• CVE-2021-3517
• CVE-2021-3518
• CVE-2021-3537
• CVE-2021-3541

Note that two additional CVEs were addressed upstream but are not relevant to this release. CVE-2021-3516 via xmllint is not present in Nokogiri, and CVE-2020-7595 has been patched in Nokogiri since v1.10.8 (see #1992).

Please see nokogiri/GHSA-7rrm-v45f-jp64 or #2233 for a more complete analysis of these CVEs and patches.

Dependencies

• [CRuby] vendored libxml2 is updated from 2.9.10 to 2.9.12. (Note that 2.9.11 was skipped because it was superseded by 2.9.12 a few hours after its release.)

1.11.3 / 2021-04-07

Fixed

• [CRuby] Passing non-Node objects to Document#root= now raises an ArgumentError exception. Previously this likely segfaulted. [#1900]
• [JRuby] Passing non-Node objects to Document#root= now raises an ArgumentError exception. Previously this raised a TypeError exception.
• [CRuby] arm64/aarch64 systems (like Apple's M1) can now compile libxml2 and libxslt from source (though we continue to strongly advise users to install the native gems for the best possible experience)

1.11.2 / 2021-03-11

... (truncated)

Commits

• e43f521 version bump to v1.11.5
• 42354e4 Merge pull request #2243 from sparklemotion/flavorjones-v1_11_x-update-tests-...
• 05f30eb update CHANGELOG
• e6709aa windows: work around libxml2 xmlCleanupParser
• 8f54c0f test: adjust tests to pass on system libxml2 >= 2.9.11
• 3d8a570 ci: windows config for github actions
• 4b9bfe3 update CHANGELOG with the GHSA
• 9d69b44 version bump to v1.11.4
• 058e87f update CHANGELOG with complete CVE information
• 9285251 Merge pull request #2234 from sparklemotion/2233-upgrade-to-libxml-2-9-12
• Additional commits viewable in compare view

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.

---

Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR:

• @dependabot rebase will rebase this PR
• @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
• @dependabot merge will merge this PR after your CI passes on it
• @dependabot squash and merge will squash and merge this PR after your CI passes on it
• @dependabot cancel merge will cancel a previously requested merge and block automerging
• @dependabot reopen will reopen this PR if it is closed
• @dependabot close will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
• @dependabot ignore this major version will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this minor version will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this dependency will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
• @dependabot use these labels will set the current labels as the default for future PRs for this repo and language
• @dependabot use these reviewers will set the current reviewers as the default for future PRs for this repo and language
• @dependabot use these assignees will set the current assignees as the default for future PRs for this repo and language
• @dependabot use this milestone will set the current milestone as the default for future PRs for this repo and language
• @dependabot badge me will comment on this PR with code to add a "Dependabot enabled" badge to your readme

Additionally, you can set the following in your Dependabot dashboard:

• Update frequency (including time of day and day of week)
• Pull request limits (per update run and/or open at any time)
• Automerge options (never/patch/minor, and dev/runtime dependencies)
• Out-of-range updates (receive only lockfile updates, if desired)
• Security updates (receive only security updates, if desired)

[dependabot-preview]

Superseded by #360.