Configuration for ESPSomfy-RTS

[cedmoreau]

Hi,
This could be added to the wiki (in Integration pages).
Homebridge-blinds works with ESPSomfy-RTS (see https://github.com/rstrouse/ESPSomfy-RTS). It is a small cheap hardware that allows wifi remote access to Somfy blinds using RTS radio protocol.
This device accepts commands through HTTP POST/GET commands (as well as MQTT). This fits well with home bridge-blinds (See https://github.com/rstrouse/ESPSomfy-RTS/wiki/Integrations).
needs to be modified with the IP/DNS of the ESP/
needs to be modified with the shade identifier from ESPSomfyRTS (from 1 to 32)
This is some needed computation to translate position from/to home bridge-blinds (in % open) to ESPSomfyRTS (in % closed).

Here is an configuration example:
{
"name": "Shade1",
"up_url": {
"url": "http:///shadeCommand?shadeId=&target=%%POS%%",
"method": "GET"
},
"down_url": {
"url": "http:///shadeCommand?shadeId=&target=%%POS%%",
"method": "GET"
},
"motion_time": 28000,
"stop_url": {
"url": "http:///shadeCommand?shadeId=1&command=my",
"method": "GET"
},
"pos_url": "http:///shades",
"pos_jsonata": "100-position[0]",
"send_pos_jsonata": "( 100 - $number($) ) ",
"verbose": true,
"accessory": "BlindsHTTP"
}

Best regards to all,

[dxdc]

I've updated the wiki, thanks for your contribution. Is the stop URL correct, or should it also include the shade identifier?

[cedmoreau]

Hi,
Your are right this should have a shade identifier. I did put some test between "<" ">" that was removed when I send the text.
There is the corrected text below:
"espaddress" needs to be modified with the IP/DNS of the ESP/
"identifier" needs to be modified with the shade identifier from ESPSomfyRTS (from 1 to 32)
This is some needed computation to translate position from/to home bridge-blinds (in % open) to ESPSomfyRTS (in % closed).

Here is an configuration example:

{
"name": "Shade1",
"up_url": {
"url": "http://"espaddress"/shadeCommand?shadeId="identifier"&target=%%POS%%",
"method": "GET"
},
"down_url": {
"url": "http://"espaddress"/shadeCommand?shadeId="identifier"&target=%%POS%%",
"method": "GET"
},
"motion_time": 28000,
"stop_url": {
"url": "http://"espaddress"/shadeCommand?shadeId="identifier"&command=my",
"method": "GET"
},
"pos_url": "http://"espaddress"/shades",
"pos_jsonata": "100-position[0]",
"send_pos_jsonata": "( 100 - $number($) ) ",
"verbose": false,
"accessory": "BlindsHTTP"
}

[dxdc]

Implemented: https://github.com/dxdc/homebridge-blinds/wiki/Tested-configurations#integration-with-espsomfy-rts

Please let me know if you have any other comments.

[cedmoreau]

Yes this is almost fine: One more thing I forgot: 100-position[0] is 100-position[« Identier - 1 »] Sorry about this. Thank again for your work

…

Le 27 déc. 2023 à 18:30, Daniel Caspi ***@***.***> a écrit : Implemented: https://github.com/dxdc/homebridge-blinds/wiki/Tested-configurations#integration-with-espsomfy-rts Please let me know if you have any other comments. — Reply to this email directly, view it on GitHub <#83 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AMPPNNF7ZWAFBFH2OQOSZI3YLRLJ5AVCNFSM6AAAAABBELP3VKVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM3TSNJYGU3DC>. You are receiving this because you authored the thread.