BoM additionals

[filipswit]

Here are PN propositions:

Add USB-A connector to power RPI

17-200001
https://www.mouser.pl/ProductDetail/Amphenol-CONEC/17-200001?qs=5JGdZpAEOnhRoCbSSP33Ng%3D%3D

Add USBA to micro USB cable to the BOM

CA-USBM-10CC-0003-BK 0.3m Cable
https://www.morele.net/kabel-usb-lanberg-usb-a-microusb-0-3-m-czarny-ca-usbm-10cc-0003-bk-1620097/

Add Panel Mount Ethernet Extension Cable to the BOM or CP30220SX Keystone mount

RCP-5SPFFP-SCM7B10 it is with 100mm cable
https://www.mouser.pl/ProductDetail/Amphenol-LTW/RCP-5SPFFP-SCM7B10?qs=TFawuGRVzFrwnQdKv5DQbA%3D%3D

add 15mm plastic standoffs to the BOM

Is it for Raspberry Pi? Because then I think we need 30mm standoffs: HV module (19,6mm) + socket (8,5mm)

add M3 6-8mm countersunk screws to the BOM

How many?
https://www.tme.eu/pl/details/b3x6_bn388/sruby/bossard/1156454/

add M3 8 mm Nylon screws to the BOM

Is Poliamid fine?
https://www.tme.eu/pl/details/dr8g201m3x8/sruby/dremec/8g201m3x08/

add M2.5 countersunk screws + nuts to the BOM (Ethernet adapter fixing)

https://www.tme.eu/pl/details/b2.5x6_bn388/sruby/bossard/1156381/
https://www.tme.eu/pl/details/b2.5_bn109/nakretki/bossard/1088254/

add rpi4 + SD card to the BOM

Is 16G fine? for ex. PSF16GMDC10

Add ethernet and usbc cables to BOM

C1809GBK
C14103BK-1.5M

Add hammond enclosure to BOM

It already on BoM - HAMMOND 1550J

[gkasprow]

Add USB-A connector to power RPI

I meant PCB vertical USB-A connector; Very short USB cable will be used to power RPI installed above the main board

Add USBA to micro USB cable to the BOM
CA-USBM-10CC-0003-BK 0.3m Cable
https://www.morele.net/kabel-usb-lanberg-usb-a-microusb-0-3-m-czarny-ca-usbm-10cc-0003-bk-1620097/

OK

Add Panel Mount Ethernet Extension Cable to the BOM or CP30220SX Keystone mount
RCP-5SPFFP-SCM7B10 it is with 100mm cable
https://www.mouser.pl/ProductDetail/Amphenol-LTW/RCP-5SPFFP-SCM7B10?qs=TFawuGRVzFrwnQdKv5DQbA%3D%3D

Use Keystone I mentioned, this one looks ugly - the black thread will protrude through the box wall
https://www.tme.eu/pl/details/cp30220sx/zlacza-rj/cliff/

add 15mm plastic standoffs to the BOM
Is it for Raspberry Pi? Because then I think we need 30mm standoffs: HV module (19,6mm) + socket (8,5mm)

Nope, for the main board - we need to attach it to the metal case
We need higher ones for RPI

add M3 6-8mm countersunk screws to the BOM
How many?
https://www.tme.eu/pl/details/b3x6_bn388/sruby/bossard/1156454/

the same number as the standoffs above. We will use them to attach the PCB from bottom side of the metal box

add M3 8 mm Nylon screws to the BOM
Is Poliamid fine?
https://www.tme.eu/pl/details/dr8g201m3x8/sruby/dremec/8g201m3x08/

yes, we will use them to attach the mainboard to the standoffs

add M2.5 countersunk screws + nuts to the BOM (Ethernet adapter fixing)
https://www.tme.eu/pl/details/b2.5x6_bn388/sruby/bossard/1156381/
https://www.tme.eu/pl/details/b2.5_bn109/nakretki/bossard/1088254/

this is for ethernet connector (https://www.tme.eu/pl/details/cp30220sx/zlacza-rj/cliff/)

add rpi4 + SD card to the BOM
Is 16G fine? for ex. PSF16GMDC10

no, 128GB high speed one (cat10); we have a lot of data to log

Add ethernet and usbc cables to BOM
C1809GBK
C14103BK-1.5M

we need very short cable that connects RPI with Keystone connector

[filipswit]

I meant PCB vertical USB-A connector; Very short USB cable will be used to power RPI installed above the main board

Vertical USB connector 1734366-1

15mm Standoffs for MainBoard R30-1611500

Added Kingston 128GB uSD card

Changed Eth cable to 0.15m 4040849924576

Do you have a nut schematic symbol to use it? I have only screws and standoffs

[gkasprow]

Do you have a nut schematic symbol to use it? I have only screws and standoffs

just use general mechanic symbol I use in other projects; fill PN on the schematic