Skip to content

Latest commit

 

History

History
188 lines (124 loc) · 4.99 KB

API.md

File metadata and controls

188 lines (124 loc) · 4.99 KB
Raw

pico-lorawan API

Include Library

#include <pico/lorawan.h>

Initialization

SX1276 Settings

// pin configuration for SX1276 radio module
struct lorawan_sx1276_settings sx1276_settings = {
    .spi = {
        .inst = PICO_DEFAULT_SPI_INSTANCE, // RP2040 SPI instance
        .mosi = PICO_DEFAULT_SPI_TX_PIN,   // SPI MOSI GPIO
        .miso = PICO_DEFAULT_SPI_RX_PIN,   // SPI MISO GPIO
        .sck = PICO_DEFAULT_SPI_SCK_PIN,   // SPI SCK GPIO
        .nss = 8.                          // SPI NSS / CS GPIO
    },
    .reset = 9,                            // SX1276 RESET GPIO
    .dio0 = 7,                             // SX1276 DIO0 / G0 GPIO
    .dio1 = 10                             // SX1276 DIO0 / G1 GPIO
};

ABP

Initialize the library for ABP.

// ABP settings
const struct lorawan_abp_settings abp_settings = {
    // LoRaWAN device address (32-bit)
    .device_address = "00000000",
  
    // LoRaWAN Network Session Key (128-bit)
    .network_session_key = "00000000000000000000000000000000",
  
    // LoRaWAN Application Session Key (128-bit)
    .app_session_key = "00000000000000000000000000000000",
  
    // LoRaWAN Channel Mask,  NULL value will use the default channel mask
    // for US915 with TTN use "FF0000000000000000020000"
    .channel_mask = NULL,
};

int lorawan_init_abp(const struct lorawan_sx1276_settings* sx1276_settings, LoRaMacRegion_t region, const struct lorawan_abp_settings* abp_settings);
  • sx1276_settings - pointer to settings for SX1276 SPI and GPIO pins
  • region - region to use, see enum LoRaMacRegion_t for supported values]
  • abp_settings - pointer to LoRaWAN ABP settings

Returns 0 on success, -1 on error.

OTAA

Initialize the library for OTAA.

const struct lorawan_otaa_settings otaa_settings = {
    // LoRaWAN Device EUI (64-bit), NULL value will use Default Dev EUI
    .device_eui   = "0000000000000000",
  
    // LoRaWAN Application / Join EUI (64-bit)
    .app_eui      = "0000000000000000",
  
    // LoRaWAN Application Key (128-bit)
    .app_key      = "00000000000000000000000000000000",

    // LoRaWAN Channel Mask,  NULL value will use the default channel mask
    // for US915 with TTN use "FF0000000000000000020000"
    .channel_mask = NULL,
};

int lorawan_init_otaa(const struct lorawan_sx1276_settings* sx1276_settings, LoRaMacRegion_t region, const struct lorawan_otaa_settings* otaa_settings);
  • sx1276_settings - pointer to settings for SX1276 SPI and GPIO pins
  • region - region to use, see enum LoRaMacRegion_t for supported values]
  • otaa_settings - pointer to LoRaWAN OTAA settings

Returns 0 on success, -1 on error.

Joining

Start Join

Start the LoRaWAN network join process.

int lorawan_join();

Returns 0 on success, -1 on error.

Join Status

Query the LoRaWAN network join status.

int lorawan_is_joined();

Returns 1 if the board has successfully joined the LoRaWAN network, 0 otherwise.

Processing Pending Events

Without Timeout

Let the LoRaWAN library process pending events.

int lorawan_process();

Returns 0 if there is a pending event, 1 if there are no pending events and the calling application can go into low power sleep mode.

With Timeout

Let the lorwan library process pending events for up to n milliseconds.

int lorawan_process_timeout_ms(uint32_t timeout_ms);
  • timeout_ms in milliseconds to wait for LoRaWAN event.

Returns 0 on event, 1 on timeout.

Sending Uplink Messages

Unconfirmed

Send an unconfirmed uplink message.

int lorawan_send_unconfirmed(const void* data, uint8_t data_len, uint8_t app_port);
  • data - message data buffer to send
  • data_len - size of message in bytes
  • app_port - application port to use for message

Returns 0 on success, -1 on failure.

Receiving Downlink Messages

int lorawan_receive(void* data, uint8_t data_len, uint8_t* app_port);
  • data - message data buffer to store received data
  • data_len - size of message data buffer in bytes
  • app_port - pointer to store application port of received message

Returns length of received message on success, -1 on failure.

Other

Default Dev EUI

Read the board's default Dev EUI Dev EUI which is based on the Pico SDK's pico_get_unique_board_id(...) API which uses the on board NOR flash device 64-bit unique ID.

const char* lorawan_default_dev_eui(char* dev_eui);
  • dev_eui - 17 byte buffer to store default Dev EUI as c-string

Returns dev_eui argument.

Debugging Ouput

Enable or disable debug output from the library.

void lorawan_debug(bool debug);
  • debug - true to enable debug output, false to disable debug output