Skip to content

Latest commit

 

History

History

RGB

Folders and files

NameName
Last commit message
Last commit date

parent directory

..
ESP_Panel_Conf.h
ESP_Panel_Conf.h
 
 
README.md
README.md
 
 
RGB.ino
RGB.ino
 
 

README.md

Supported ESP SoCs ESP32-S3
Supported LCD Controllers EK9716B ST7262

Single RGB LCD Example

The example demonstrates how to develop different model LCDs with RGB (without 3-wire SPI) interface using standalone drivers and test them by displaying color bars.

How to use

  1. Configure drivers if needed.
  2. Modify the macros in the example to match the parameters according to your hardware.
  3. Navigate to the Tools menu in the Arduino IDE to choose a ESP board and configure its parameters, please refter to Configuring Supported Development Boards
  4. Verify and upload the example to your ESP board.

Serial Output

...
RGB LCD example start
Create RGB LCD bus
Create LCD device
Draw color bar from top left to bottom right, the order is B - G - R
RGB LCD example end
RGB refresh rate: 0
RGB refresh rate: 0
RGB refresh rate: 31
RGB refresh rate: 31
...

Troubleshooting

Please check the FAQ first to see if the same question exists. If not, please create a Github issue. We will get back to you as soon as possible.