Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

CEdit dies on file read with incomplete namelist input #1933

Open
rpeacoc opened this issue Sep 7, 2021 · 1 comment
Open

CEdit dies on file read with incomplete namelist input #1933

rpeacoc opened this issue Sep 7, 2021 · 1 comment
Assignees
@preneke
Labels
bug Component-CEDit

Comments

@rpeacoc
Copy link
Contributor

rpeacoc commented Sep 7, 2021

CEdit dies in the namelist input routine reading the following file. &MFIR input has "/"missing at the end of the line. CEdit should capture this and report an error message rather than die.

&HEAD VERSION = 7700, TITLE = 'CData Example 3 Sensitivity Analysis' /
&MHDR NUMBER_OF_CASES = 10 /
 
!! Scenario Configuration 
&TIME SIMULATION = 1000 PRINT = 60 SMOKEVIEW = 15 SPREADSHEET = 1 / 
&INIT PRESSURE = 101325 RELATIVE_HUMIDITY = 50 INTERIOR_TEMPERATURE = 20 EXTERIOR_TEMPERATURE = 20 /
 
!! Material Properties 
&MATL ID = 'Gyp' MATERIAL = 'Gypsum Board', 
      CONDUCTIVITY = 0.16 DENSITY = 480 SPECIFIC_HEAT = 1, THICKNESS = 0.025 EMISSIVITY = 0.9 /
&MATL ID = 'Concrete' MATERIAL = 'Concrete Normal Weight (6 in)', 
      CONDUCTIVITY = 1.75 DENSITY = 2200 SPECIFIC_HEAT = 1, THICKNESS = 0.15 EMISSIVITY = 0.94 /
&MATL ID = 'Human' MATERIAL = 'Human skin (properties of water at 20 C)', 
      CONDUCTIVITY = 0.58 DENSITY = 998.3 SPECIFIC_HEAT = 4.183, THICKNESS = 0.2032 EMISSIVITY = 0.9 /
 
!! Compartments 
&COMP ID = 'Office #101'
      DEPTH = 4.0132 HEIGHT = 3.048 WIDTH = 3.9116
      CEILING_MATL_ID = 'Gyp' CEILING_THICKNESS = 0.015875 WALL_MATL_ID = 'Gyp' WALL_THICKNESS = 0.015875 FLOOR_MATL_ID = 'Concrete' FLOOR_THICKNESS = 0.1524
      ORIGIN = 0, 8.1534, 0 GRID = 50, 50, 50 LEAK_AREA_RATIO = 0.0012, 0.00017 /
&COMP ID = 'Office #102'
      DEPTH = 4.064 HEIGHT = 3.048 WIDTH = 3.9116
      CEILING_MATL_ID = 'Gyp' CEILING_THICKNESS = 0.015875 WALL_MATL_ID = 'Gyp' WALL_THICKNESS = 0.015875 FLOOR_MATL_ID = 'Concrete' FLOOR_THICKNESS = 0.1524
      ORIGIN = 0, 0, 0 GRID = 50, 50, 50 LEAK_AREA_RATIO = 0.0012, 0.00017 /
&COMP ID = 'Office #103'
      DEPTH = 3.0734 HEIGHT = 3.048 WIDTH = 3.9116
      CEILING_MATL_ID = 'Gyp' CEILING_THICKNESS = 0.015875 WALL_MATL_ID = 'Gyp' WALL_THICKNESS = 0.015875 FLOOR_MATL_ID = 'Concrete' FLOOR_THICKNESS = 0.1524
      ORIGIN = 3.9116, 9.0932, 0 GRID = 50, 50, 50 LEAK_AREA_RATIO = 0.0012, 0.00017 /
&COMP ID = 'Office #104'
      DEPTH = 3.0734 HEIGHT = 3.048 WIDTH = 3.9116
      CEILING_MATL_ID = 'Gyp' CEILING_THICKNESS = 0.015875 WALL_MATL_ID = 'Gyp' WALL_THICKNESS = 0.015875 FLOOR_MATL_ID = 'Concrete' FLOOR_THICKNESS = 0.1524
      ORIGIN = 3.9116, 0, 0 GRID = 50, 50, 50 LEAK_AREA_RATIO = 0.0012, 0.00017 /
&COMP ID = 'Office #105'
      DEPTH = 3.0734 HEIGHT = 3.048 WIDTH = 3.9116
      CEILING_MATL_ID = 'Gyp' CEILING_THICKNESS = 0.015875 WALL_MATL_ID = 'Gyp' WALL_THICKNESS = 0.015875 FLOOR_MATL_ID = 'Concrete' FLOOR_THICKNESS = 0.1524
      ORIGIN = 7.8232, 9.0932, 0 GRID = 50, 50, 50 LEAK_AREA_RATIO = 0.0012, 0.00017 /
&COMP ID = 'Office #106'
      DEPTH = 3.0734 HEIGHT = 3.048 WIDTH = 3.9116
      CEILING_MATL_ID = 'Gyp' CEILING_THICKNESS = 0.015875 WALL_MATL_ID = 'Gyp' WALL_THICKNESS = 0.015875 FLOOR_MATL_ID = 'Concrete' FLOOR_THICKNESS = 0.1524
      ORIGIN = 7.8232, 0, 0 GRID = 50, 50, 50 LEAK_AREA_RATIO = 0.0012, 0.00017 /
&COMP ID = 'Office #107'
      DEPTH = 4.7752 HEIGHT = 3.048 WIDTH = 5.6134
      CEILING_MATL_ID = 'Gyp' CEILING_THICKNESS = 0.015875 WALL_MATL_ID = 'Gyp' WALL_THICKNESS = 0.015875 FLOOR_MATL_ID = 'Concrete' FLOOR_THICKNESS = 0.1524
      ORIGIN = 11.7348, 0, 0 GRID = 50, 50, 50 LEAK_AREA_RATIO = 0.0012, 0.00017 /
&COMP ID = 'Stair Hall 1'
      DEPTH = 1.3716 HEIGHT = 3.6576 WIDTH = 3.175
      CEILING_MATL_ID = 'Gyp' CEILING_THICKNESS = 0.015875 WALL_MATL_ID = 'Gyp' WALL_THICKNESS = 0.015875 FLOOR_MATL_ID = 'Concrete' FLOOR_THICKNESS = 0.1524
      ORIGIN = 11.7348, 4.7752, 0 GRID = 50, 50, 50 LEAK_AREA_RATIO = 0.0012, 0.00017 /
&COMP ID = 'Office #108'
      DEPTH = 6.0198 HEIGHT = 3.048 WIDTH = 5.6134
      CEILING_MATL_ID = 'Gyp' CEILING_THICKNESS = 0.015875 WALL_MATL_ID = 'Gyp' WALL_THICKNESS = 0.015875 FLOOR_MATL_ID = 'Concrete' FLOOR_THICKNESS = 0.1524
      ORIGIN = 11.7348, 6.1468, 0 GRID = 50, 50, 50 LEAK_AREA_RATIO = 0.0012, 0.00017 /
&COMP ID = 'Conference Room'
      DEPTH = 2.9718 HEIGHT = 3.048 WIDTH = 4.6482
      CEILING_MATL_ID = 'Gyp' CEILING_THICKNESS = 0.015875 WALL_MATL_ID = 'Gyp' WALL_THICKNESS = 0.015875 FLOOR_MATL_ID = 'Concrete' FLOOR_THICKNESS = 0.1524
      ORIGIN = 5.5626, 4.5974, 0 GRID = 50, 50, 50 LEAK_AREA_RATIO = 0.0012, 0.00017 /
&COMP ID = 'Stairwell'
      DEPTH = 1.3716 HEIGHT = 2.4384 WIDTH = 2.4384
      CEILING_MATL_ID = 'Gyp' CEILING_THICKNESS = 0.015875 WALL_MATL_ID = 'Gyp' WALL_THICKNESS = 0.015875 FLOOR_MATL_ID = 'Concrete' FLOOR_THICKNESS = 0.1524
      ORIGIN = 14.9098, 4.7752, 0 GRID = 50, 50, 50 LEAK_AREA_RATIO = 0.0012, 0.00017 /
&COMP ID = 'Foyer'
      DEPTH = 4.0894 HEIGHT = 3.6576 WIDTH = 3.9116
      CEILING_MATL_ID = 'Gyp' CEILING_THICKNESS = 0.015875 WALL_MATL_ID = 'Gyp' WALL_THICKNESS = 0.015875 FLOOR_MATL_ID = 'Concrete' FLOOR_THICKNESS = 0.1524
      ORIGIN = 0, 4.064, 0 GRID = 50, 50, 50 LEAK_AREA_RATIO = 0.0012, 0.00017 /
&COMP ID = 'Even Hallway 1'
      DEPTH = 1.524 HEIGHT = 3.6576 WIDTH = 7.8232
      CEILING_MATL_ID = 'Gyp' CEILING_THICKNESS = 0.015875 WALL_MATL_ID = 'Gyp' WALL_THICKNESS = 0.015875 FLOOR_MATL_ID = 'Concrete' FLOOR_THICKNESS = 0.1524
      ORIGIN = 3.9116, 3.0734, 0 GRID = 50, 50, 50 LEAK_AREA_RATIO = 0.0012, 0.00017 /
&COMP ID = 'Odd Hallway 1'
      DEPTH = 1.524 HEIGHT = 3.6576 WIDTH = 7.8232
      CEILING_MATL_ID = 'Gyp' CEILING_THICKNESS = 0.015875 WALL_MATL_ID = 'Gyp' WALL_THICKNESS = 0.015875 FLOOR_MATL_ID = 'Concrete' FLOOR_THICKNESS = 0.1524
      ORIGIN = 3.9116, 7.5692, 0 GRID = 50, 50, 50 LEAK_AREA_RATIO = 0.0012, 0.00017 /
&COMP ID = 'Front Hall 1'
      DEPTH = 2.9718 HEIGHT = 3.6576 WIDTH = 1.651
      CEILING_MATL_ID = 'Gyp' CEILING_THICKNESS = 0.015875 WALL_MATL_ID = 'Gyp' WALL_THICKNESS = 0.015875 FLOOR_MATL_ID = 'Concrete' FLOOR_THICKNESS = 0.1524
      ORIGIN = 3.9116, 4.5974, 0 GRID = 50, 50, 50 LEAK_AREA_RATIO = 0.0012, 0.00017 /
&COMP ID = 'Back Hall 1'
      DEPTH = 2.9718 HEIGHT = 3.6576 WIDTH = 1.524
      CEILING_MATL_ID = 'Gyp' CEILING_THICKNESS = 0.015875 WALL_MATL_ID = 'Gyp' WALL_THICKNESS = 0.015875 FLOOR_MATL_ID = 'Concrete' FLOOR_THICKNESS = 0.1524
      ORIGIN = 10.2108, 4.5974, 0 GRID = 50, 50, 50 LEAK_AREA_RATIO = 0.0012, 0.00017 /
 
!! Wall Vents
&VENT TYPE = 'WALL' ID = 'Front Door' COMP_IDS = 'Foyer' 'OUTSIDE' , BOTTOM = 0 HEIGHT = 2.1336, WIDTH = 1.8288
      FACE = 'LEFT'  OFFSET = 1.041548 /
&VENT TYPE = 'WALL' ID = 'Office #1 Door' COMP_IDS = 'Office #101', 'Odd Hallway 1', BOTTOM = 0 HEIGHT = 2.1336, WIDTH = 0.9144
      FACE = 'FRONT'  OFFSET = 1.49855 /
&VENT TYPE = 'WALL' ID = 'Office #3 Door' COMP_IDS = 'Office #103', 'Odd Hallway 1', BOTTOM = 0 HEIGHT = 2.1336, WIDTH = 0.9144
      FACE = 'FRONT'  OFFSET = 1.498549 /
&VENT TYPE = 'WALL' ID = 'Office #5 Door' COMP_IDS = 'Office #105', 'Odd Hallway 1', BOTTOM = 0 HEIGHT = 2.1336, WIDTH = 0.9144
      FACE = 'FRONT'  OFFSET = 1.498549 /
&VENT TYPE = 'WALL' ID = 'Office #2 Door' COMP_IDS = 'Office #102', 'Even Hallway 1', BOTTOM = 0 HEIGHT = 2.1336, WIDTH = 0.9144
      FACE = 'REAR'  OFFSET = 1.498549 /
&VENT TYPE = 'WALL' ID = 'Office #4 Door' COMP_IDS = 'Office #104', 'Even Hallway 1', BOTTOM = 0 HEIGHT = 2.1336, WIDTH = 0.9144
      FACE = 'REAR'  OFFSET = 1.498549 /
&VENT TYPE = 'WALL' ID = 'Office #6 Door' COMP_IDS = 'Office #106', 'Even Hallway 1', BOTTOM = 0 HEIGHT = 2.1336, WIDTH = 0.9144
      FACE = 'REAR'  OFFSET = 1.498549 /
&VENT TYPE = 'WALL' ID = 'Bathroom Door' COMP_IDS = 'Stair Hall 1', 'Stairwell', BOTTOM = 0 HEIGHT = 2.1336, WIDTH = 0.9144
      FACE = 'RIGHT'  OFFSET = 0.2286 /
&VENT TYPE = 'WALL' ID = 'Foyer2FrontHall' COMP_IDS = 'Foyer', 'Front Hall 1', BOTTOM = 0 HEIGHT = 3.6576, WIDTH = 2.9718
      FACE = 'RIGHT'  OFFSET = 0.4700473 /
&VENT TYPE = 'WALL' ID = 'Foyer2OddHall' COMP_IDS = 'Foyer', 'Odd Hallway 1', BOTTOM = 0 HEIGHT = 3.6576, WIDTH = 0.4700473
      FACE = 'RIGHT'  OFFSET = 3.44424 /
&VENT TYPE = 'WALL' ID = 'Foyer2EvenHall' COMP_IDS = 'Foyer', 'Even Hallway 1', BOTTOM = 0 HEIGHT = 3.6576, WIDTH = 0.4700473
      FACE = 'RIGHT'  OFFSET = 0 /
&VENT TYPE = 'WALL' ID = 'FrontHall2EvenHall' COMP_IDS = 'Even Hallway 1', 'Front Hall 1', BOTTOM = 0 HEIGHT = 3.6576, WIDTH = 1.524
      FACE = 'REAR'  OFFSET = 0 /
&VENT TYPE = 'WALL' ID = 'FrontHall2OddHall' COMP_IDS = 'Odd Hallway 1', 'Front Hall 1', BOTTOM = 0 HEIGHT = 3.6576, WIDTH = 1.524
      FACE = 'FRONT'  OFFSET = 0 /
&VENT TYPE = 'WALL' ID = 'BackHall2EvenHall' COMP_IDS = 'Even Hallway 1', 'Back Hall 1', BOTTOM = 0 HEIGHT = 3.6576, WIDTH = 1.524
      FACE = 'REAR'  OFFSET = 6.298997 /
&VENT TYPE = 'WALL' ID = 'BackHall2OddHall' COMP_IDS = 'Odd Hallway 1', 'Back Hall 1', BOTTOM = 0 HEIGHT = 3.6576, WIDTH = 1.524
      FACE = 'FRONT'  OFFSET = 6.298997 /
&VENT TYPE = 'WALL' ID = 'BathroomHall2BackHall' COMP_IDS = 'Stair Hall 1', 'Back Hall 1', BOTTOM = 0 HEIGHT = 3.048, WIDTH = 1.3716
      FACE = 'LEFT'  OFFSET = 0 /
&VENT TYPE = 'WALL' ID = 'Laboratory Door' COMP_IDS = 'Office #108', 'Back Hall 1', BOTTOM = 0 HEIGHT = 2.1336, WIDTH = 0.9144
      FACE = 'LEFT'  OFFSET = 0.1524 /
&VENT TYPE = 'WALL' ID = 'Conference Room Door' COMP_IDS = 'Conference Room', 'Foyer', BOTTOM = 0 HEIGHT = 2.1336, WIDTH = 0.9144
      FACE = 'LEFT'  OFFSET = 1.0287 /
&VENT TYPE = 'WALL' ID = 'Inventory Door' COMP_IDS = 'Office #107', 'Stair Hall 1', BOTTOM = 0 HEIGHT = 2.1336, WIDTH = 0.6096
      FACE = 'REAR'  OFFSET = 2.501798 /
 
!! Mechanical Vents
&VENT TYPE = 'MECHANICAL' ID = 'MV in #1' COMP_IDS = 'OUTSIDE', 'Even Hallway 1'
      AREAS = 0.09290304, 0.09290304 HEIGHTS = 2.5, 2.5 FLOW = 0.01 OFFSETS = 3, 0 FILTER_TIME = 0 FILTER_EFFICIENCY = 0 /
&VENT TYPE = 'MECHANICAL' ID = 'MV in #2' COMP_IDS = 'OUTSIDE', 'Odd Hallway 1'
      AREAS = 0.09290304, 0.09290304 HEIGHTS = 2.5, 2.5 FLOW = 0.01 OFFSETS = 3, 0 FILTER_TIME = 0 FILTER_EFFICIENCY = 0 /
&VENT TYPE = 'MECHANICAL' ID = 'MV out #1' COMP_IDS = 'Even Hallway 1', 'OUTSIDE'
      AREAS = 0.18580608, 0.18580608 HEIGHTS = 0.9144, 0.9144 FLOW = 0.01 OFFSETS = 5.9944, 1.524 FILTER_TIME = 0 FILTER_EFFICIENCY = 0 /
&VENT TYPE = 'MECHANICAL' ID = 'MV out #2' COMP_IDS = 'Odd Hallway 1', 'OUTSIDE'
      AREAS = 0.18580608, 0.18580608 HEIGHTS = 0.9144, 0.9144 FLOW = 0.01 OFFSETS = 5.9944, 0 FILTER_TIME = 0 FILTER_EFFICIENCY = 0 /
 
!! Fires 
&FIRE ID = 'Fire'  COMP_ID = 'Office #108', FIRE_ID = 't-squared fire'  LOCATION = 2.806598, 3.0099 / 
&FIRE ID = 'Base Fire'  COMP_ID = 'Office #108', FIRE_ID = 't-squared base fire'  LOCATION = 2.806598, 3.0099 / 
&CHEM ID = 't-squared fire' CARBON = 1 CHLORINE = 0 HYDROGEN = 4 NITROGEN = 0 OXYGEN = 0 HEAT_OF_COMBUSTION = 50000 RADIATIVE_FRACTION = 0.35 / 
&TABL ID = 't-squared fire' LABELS = 'TIME', 'HRR' , 'HEIGHT' , 'AREA' , 'CO_YIELD' , 'SOOT_YIELD' , 'HCN_YIELD' , 'HCL_YIELD' , 'TRACE_YIELD'  /
&TABL ID = 't-squared fire', DATA = 0, 0, 0, 0.001, 0.1, 0.1, 0, 0, 0 /
&TABL ID = 't-squared fire', DATA = 30, 10.54, 0, 0.01881082, 0.1, 0.1, 0, 0, 0 /
&TABL ID = 't-squared fire', DATA = 60, 42.16, 0, 0.05702374, 0.1, 0.1, 0, 0, 0 /
&TABL ID = 't-squared fire', DATA = 90, 94.86, 0, 0.1090942, 0.1, 0.1, 0, 0, 0 /
&TABL ID = 't-squared fire', DATA = 120, 168.64, 0, 0.1728637, 0.1, 0.1, 0, 0, 0 /
&TABL ID = 't-squared fire', DATA = 150, 263.5, 0, 0.2470357, 0.1, 0.1, 0, 0, 0 /
&TABL ID = 't-squared fire', DATA = 180, 379.44, 0, 0.3307118, 0.1, 0.1, 0, 0, 0 /
&TABL ID = 't-squared fire', DATA = 210, 516.46, 0, 0.4232185, 0.1, 0.1, 0, 0, 0 /
&TABL ID = 't-squared fire', DATA = 240, 674.56, 0, 0.5240247, 0.1, 0.1, 0, 0, 0 /
&TABL ID = 't-squared fire', DATA = 270, 853.74, 0, 0.6326969, 0.1, 0.1, 0, 0, 0 /
&TABL ID = 't-squared fire', DATA = 300, 1054, 0, 0.7488722, 0.1, 0.1, 0, 0, 0 /
&TABL ID = 't-squared fire', DATA = 600, 1054, 0, 0.7488722, 0.1, 0.1, 0, 0, 0 /
&TABL ID = 't-squared fire', DATA = 630, 853.74, 0, 0.6326969, 0.1, 0.1, 0, 0, 0 /
&TABL ID = 't-squared fire', DATA = 660, 674.56, 0, 0.5240247, 0.1, 0.1, 0, 0, 0 /
&TABL ID = 't-squared fire', DATA = 690, 516.46, 0, 0.4232185, 0.1, 0.1, 0, 0, 0 /
&TABL ID = 't-squared fire', DATA = 720, 379.44, 0, 0.3307118, 0.1, 0.1, 0, 0, 0 /
&TABL ID = 't-squared fire', DATA = 750, 263.5, 0, 0.2470357, 0.1, 0.1, 0, 0, 0 /
&TABL ID = 't-squared fire', DATA = 780, 168.64, 0, 0.1728637, 0.1, 0.1, 0, 0, 0 /
&TABL ID = 't-squared fire', DATA = 810, 94.86, 0, 0.1090942, 0.1, 0.1, 0, 0, 0 /
&TABL ID = 't-squared fire', DATA = 840, 42.16, 0, 0.05702374, 0.1, 0.1, 0, 0, 0 /
&TABL ID = 't-squared fire', DATA = 870, 10.54, 0, 0.01881082, 0.1, 0.1, 0, 0, 0 /
&TABL ID = 't-squared fire', DATA = 900, 0, 0, 0.09, 0.01, 0.01, 0, 0, 0 /
&TABL ID = 't-squared fire', DATA = 910, 0, 0, 0.09, 0.01, 0.01, 0, 0, 0 /
&CHEM ID = 't-squared base fire' CARBON = 1 CHLORINE = 0 HYDROGEN = 4 NITROGEN = 0 OXYGEN = 0 HEAT_OF_COMBUSTION = 50000 RADIATIVE_FRACTION = 0.35 / 
&TABL ID = 't-squared base fire' LABELS = 'TIME', 'HRR' , 'HEIGHT' , 'AREA' , 'CO_YIELD' , 'SOOT_YIELD' , 'HCN_YIELD' , 'HCL_YIELD' , 'TRACE_YIELD'  /
&TABL ID = 't-squared base fire', DATA = 0, 0, 0, 0.001, 0.01, 0.01, 0, 0, 0 /
&TABL ID = 't-squared base fire', DATA = 30, 10.54, 0, 0.01881082, 0.01, 0.01, 0, 0, 0 /
&TABL ID = 't-squared base fire', DATA = 60, 42.16, 0, 0.05702374, 0.01, 0.01, 0, 0, 0 /
&TABL ID = 't-squared base fire', DATA = 90, 94.86, 0, 0.1090942, 0.01, 0.01, 0, 0, 0 /
&TABL ID = 't-squared base fire', DATA = 120, 168.64, 0, 0.1728637, 0.01, 0.01, 0, 0, 0 /
&TABL ID = 't-squared base fire', DATA = 150, 263.5, 0, 0.2470357, 0.01, 0.01, 0, 0, 0 /
&TABL ID = 't-squared base fire', DATA = 180, 379.44, 0, 0.3307118, 0.01, 0.01, 0, 0, 0 /
&TABL ID = 't-squared base fire', DATA = 210, 516.46, 0, 0.4232185, 0.01, 0.01, 0, 0, 0 /
&TABL ID = 't-squared base fire', DATA = 240, 674.56, 0, 0.5240247, 0.01, 0.01, 0, 0, 0 /
&TABL ID = 't-squared base fire', DATA = 270, 853.74, 0, 0.6326969, 0.01, 0.01, 0, 0, 0 /
&TABL ID = 't-squared base fire', DATA = 300, 1054, 0, 0.7488722, 0.01, 0.01, 0, 0, 0 /
&TABL ID = 't-squared base fire', DATA = 600, 1054, 0, 0.7488722, 0.01, 0.01, 0, 0, 0 /
&TABL ID = 't-squared base fire', DATA = 630, 853.74, 0, 0.6326969, 0.01, 0.01, 0, 0, 0 /
&TABL ID = 't-squared base fire', DATA = 660, 674.56, 0, 0.5240247, 0.01, 0.01, 0, 0, 0 /
&TABL ID = 't-squared base fire', DATA = 690, 516.46, 0, 0.4232185, 0.01, 0.01, 0, 0, 0 /
&TABL ID = 't-squared base fire', DATA = 720, 379.44, 0, 0.3307118, 0.01, 0.01, 0, 0, 0 /
&TABL ID = 't-squared base fire', DATA = 750, 263.5, 0, 0.2470357, 0.01, 0.01, 0, 0, 0 /
&TABL ID = 't-squared base fire', DATA = 780, 168.64, 0, 0.1728637, 0.01, 0.01, 0, 0, 0 /
&TABL ID = 't-squared base fire', DATA = 810, 94.86, 0, 0.1090942, 0.01, 0.01, 0, 0, 0 /
&TABL ID = 't-squared base fire', DATA = 840, 42.16, 0, 0.05702374, 0.01, 0.01, 0, 0, 0 /
&TABL ID = 't-squared base fire', DATA = 870, 10.54, 0, 0.01881082, 0.01, 0.01, 0, 0, 0 /
&TABL ID = 't-squared base fire', DATA = 900, 0, 0, 0.09, 0.01, 0.01, 0, 0, 0 /
&TABL ID = 't-squared base fire', DATA = 910, 0, 0, 0.09, 0.01, 0.01, 0, 0, 0 /
 
!! Devices
&DEVC ID = 'Targ 1' COMP_ID = 'Office #101' LOCATION = 1, 1, 1.524 TYPE = 'PLATE' MATL_ID = 'Human' SURFACE_ORIENTATION = 'CEILING'
     THICKNESS = 0.2 TEMPERATURE_DEPTH = 0.1 DEPTH_UNITS = 'M' /
&DEVC ID = 'Targ 2' COMP_ID = 'Office #102' LOCATION = 1, 1, 1.524 TYPE = 'PLATE' MATL_ID = 'Human' SURFACE_ORIENTATION = 'CEILING'
     THICKNESS = 0.2 TEMPERATURE_DEPTH = 0.1 DEPTH_UNITS = 'M' /
&DEVC ID = 'Targ 7' COMP_ID = 'Office #108' LOCATION = 1, 1, 1.524 TYPE = 'PLATE' MATL_ID = 'Human' SURFACE_ORIENTATION = 'CEILING'
     THICKNESS = 0.2 TEMPERATURE_DEPTH = 0.1 DEPTH_UNITS = 'M' /
&DEVC ID = 'Targ 8' COMP_ID = 'Foyer' LOCATION = 1, 1, 1.524 TYPE = 'PLATE' MATL_ID = 'Human' SURFACE_ORIENTATION = 'CEILING'
     THICKNESS = 0.2 TEMPERATURE_DEPTH = 0.1 DEPTH_UNITS = 'M' /
&DEVC ID = 'Targ 5' COMP_ID = 'Even Hallway 1' LOCATION = 1, 1, 1.524 TYPE = 'PLATE' MATL_ID = 'Human' SURFACE_ORIENTATION = 'CEILING'
     THICKNESS = 0.2 TEMPERATURE_DEPTH = 0.1 DEPTH_UNITS = 'M' /
&DEVC ID = 'Targ 6' COMP_ID = 'Odd Hallway 1' LOCATION = 1, 1, 1.524 TYPE = 'PLATE' MATL_ID = 'Human' SURFACE_ORIENTATION = 'CEILING'
     THICKNESS = 0.2 TEMPERATURE_DEPTH = 0.1 DEPTH_UNITS = 'M' /
&DEVC ID = 'Smoke Alarm Lab' COMP_ID = 'Office #108' LOCATION = 1, 1, 3.01752 TYPE = 'SMOKE_DETECTOR' SETPOINTS = 23.9334605082804, 23.9334605082804 /
&DEVC ID = 'Smoke Alarm Office #1' COMP_ID = 'Office #101' LOCATION = 1, 1, 3.01752 TYPE = 'SMOKE_DETECTOR' SETPOINTS = 23.9334605082804, 23.9334605082804 /
&DEVC ID = 'Smoke Alarm Office #2' COMP_ID = 'Office #102' LOCATION = 1, 1, 3.01752 TYPE = 'SMOKE_DETECTOR' SETPOINTS = 23.9334605082804, 23.9334605082804 /
&DEVC ID = 'Smoke Alarm Foyer' COMP_ID = 'Foyer' LOCATION = 1, 1, 3.62712 TYPE = 'SMOKE_DETECTOR' SETPOINTS = 23.9334605082804, 23.9334605082804 /
&DEVC ID = 'Smoke Alarm Even Hallway' COMP_ID = 'Even Hallway 1' LOCATION = 1, 1, 3.62712 TYPE = 'SMOKE_DETECTOR' SETPOINTS = 23.9334605082804, 23.9334605082804 /
&DEVC ID = 'Smoke Alarm Odd Hallway' COMP_ID = 'Odd Hallway 1' LOCATION = 1, 1, 3.62712 TYPE = 'SMOKE_DETECTOR' SETPOINTS = 23.9334605082804, 23.9334605082804 /
 
!! Monte Carlo Random Distributions
&MRND ID = 'Scaling Lab ceiling thick' DISTRIBUTION_TYPE = 'UNIFORM'
      MINIMUM = 0.9 MAXIMUM = 1.1 /
&MRND ID = 'Scaling Lab floor thick' DISTRIBUTION_TYPE = 'UNIFORM'
      MINIMUM = 0.9 MAXIMUM = 1.1 /
&MRND ID = 'Scaling Lab wall thick' DISTRIBUTION_TYPE = 'UNIFORM'
      MINIMUM = 0.9 MAXIMUM = 1.1 /
&MRND ID = 'Scaling Lab height' DISTRIBUTION_TYPE = 'UNIFORM'
      MINIMUM = 0.9 MAXIMUM = 1.1 /
&MRND ID = 'Scaling Lab width' DISTRIBUTION_TYPE = 'UNIFORM'
      MINIMUM = 0.9 MAXIMUM = 1.1 /
&MRND ID = 'Scaling Lab depth' DISTRIBUTION_TYPE = 'UNIFORM'
      MINIMUM = 0.9 MAXIMUM = 1.1 /
&MRND ID = 'Scaling Gyp conductivity' DISTRIBUTION_TYPE = 'UNIFORM'
      MINIMUM = 0.9 MAXIMUM = 1.1 /
&MRND ID = 'Scaling Gyp density' DISTRIBUTION_TYPE = 'UNIFORM'
      MINIMUM = 0.9 MAXIMUM = 1.1 /
&MRND ID = 'Scaling Gyp specific heat' DISTRIBUTION_TYPE = 'UNIFORM'
      MINIMUM = 0.9 MAXIMUM = 1.1 /
&MRND ID = 'Scaling Gyp emissivity' DISTRIBUTION_TYPE = 'UNIFORM'
      MINIMUM = 0.9 MAXIMUM = 1.1 /
&MRND ID = 'Scaling Concrete conductivity' DISTRIBUTION_TYPE = 'UNIFORM'
      MINIMUM = 0.9 MAXIMUM = 1.1 /
&MRND ID = 'Scaling Concrete density' DISTRIBUTION_TYPE = 'UNIFORM'
      MINIMUM = 0.9 MAXIMUM = 1.1 /
&MRND ID = 'Scaling Concrete specific heat' DISTRIBUTION_TYPE = 'UNIFORM'
      MINIMUM = 0.9 MAXIMUM = 1.1 /
&MRND ID = 'Scaling Concrete emissivity' DISTRIBUTION_TYPE = 'UNIFORM'
      MINIMUM = 0.9 MAXIMUM = 1.1 /
&MRND ID = 'Scaling Office #1 width' DISTRIBUTION_TYPE = 'UNIFORM'
      MINIMUM = 0.9 MAXIMUM = 1.1 /
&MRND ID = 'Scaling Office #2 width' DISTRIBUTION_TYPE = 'UNIFORM'
      MINIMUM = 0.9 MAXIMUM = 1.1 /
&MRND ID = 'Scaling Office #3 width' DISTRIBUTION_TYPE = 'UNIFORM'
      MINIMUM = 0.9 MAXIMUM = 1.1 /
&MRND ID = 'Scaling Office #4 width' DISTRIBUTION_TYPE = 'UNIFORM'
      MINIMUM = 0.9 MAXIMUM = 1.1 /
&MRND ID = 'Scaling Office #5 width' DISTRIBUTION_TYPE = 'UNIFORM'
      MINIMUM = 0.9 MAXIMUM = 1.1 /
&MRND ID = 'Scaling Office #6 width' DISTRIBUTION_TYPE = 'UNIFORM'
      MINIMUM = 0.9 MAXIMUM = 1.1 /
&MRND ID = 'Scaling Office #1 depth' DISTRIBUTION_TYPE = 'UNIFORM'
      MINIMUM = 0.9 MAXIMUM = 1.1 /
&MRND ID = 'Scaling Office #2 depth' DISTRIBUTION_TYPE = 'UNIFORM'
      MINIMUM = 0.9 MAXIMUM = 1.1 /
&MRND ID = 'Scaling Office #3 depth' DISTRIBUTION_TYPE = 'UNIFORM'
      MINIMUM = 0.9 MAXIMUM = 1.1 /
&MRND ID = 'Scaling Office #4 depth' DISTRIBUTION_TYPE = 'UNIFORM'
      MINIMUM = 0.9 MAXIMUM = 1.1 /
&MRND ID = 'Scaling Office #5 depth' DISTRIBUTION_TYPE = 'UNIFORM'
      MINIMUM = 0.9 MAXIMUM = 1.1 /
&MRND ID = 'Scaling Office #6 depth' DISTRIBUTION_TYPE = 'UNIFORM'
      MINIMUM = 0.9 MAXIMUM = 1.1 /
&MRND ID = 'Scaling Office #1 height' DISTRIBUTION_TYPE = 'UNIFORM'
      MINIMUM = 0.9 MAXIMUM = 1.1 /
&MRND ID = 'Scaling Office #2 height' DISTRIBUTION_TYPE = 'UNIFORM'
      MINIMUM = 0.9 MAXIMUM = 1.1 /
&MRND ID = 'Scaling Office #3 height' DISTRIBUTION_TYPE = 'UNIFORM'
      MINIMUM = 0.9 MAXIMUM = 1.1 /
&MRND ID = 'Scaling Office #4 height' DISTRIBUTION_TYPE = 'UNIFORM'
      MINIMUM = 0.9 MAXIMUM = 1.1 /
&MRND ID = 'Scaling Office #5 height' DISTRIBUTION_TYPE = 'UNIFORM'
      MINIMUM = 0.9 MAXIMUM = 1.1 /
&MRND ID = 'Scaling Office #6 height' DISTRIBUTION_TYPE = 'UNIFORM'
      MINIMUM = 0.9 MAXIMUM = 1.1 /
&MRND ID = 'Scaling height' DISTRIBUTION_TYPE = 'UNIFORM'
      MINIMUM = 0.9 MAXIMUM = 1.1
      FYI = 'Scaling for everything that has the same max height' /
&MRND ID = 'Scaling Office #6 height' DISTRIBUTION_TYPE = 'UNIFORM'
      MINIMUM = 0.9 MAXIMUM = 1.1 /
&MRND ID = 'Scaling Lab width' DISTRIBUTION_TYPE = 'UNIFORM'
      MINIMUM = 0.9 MAXIMUM = 1.1 /
&MRND ID = 'Scaling Lab depth' DISTRIBUTION_TYPE = 'UNIFORM'
      MINIMUM = 0.9 MAXIMUM = 1.1 /
&MRND ID = 'Scaling Even Hallway width' DISTRIBUTION_TYPE = 'UNIFORM'
      MINIMUM = 0.9 MAXIMUM = 1.1 /
&MRND ID = 'Scaling Even Hallway depth' DISTRIBUTION_TYPE = 'UNIFORM'
      MINIMUM = 0.9 MAXIMUM = 1.1 /
&MRND ID = 'Scaling Odd Hallway width' DISTRIBUTION_TYPE = 'UNIFORM'
      MINIMUM = 0.9 MAXIMUM = 1.1 /
&MRND ID = 'Scaling Odd Hallway depth' DISTRIBUTION_TYPE = 'UNIFORM'
      MINIMUM = 0.9 MAXIMUM = 1.1 /
&MRND ID = 'Scaling Foyer width' DISTRIBUTION_TYPE = 'UNIFORM'
      MINIMUM = 0.9 MAXIMUM = 1.1 /
&MRND ID = 'Scaling Foyer depth' DISTRIBUTION_TYPE = 'UNIFORM'
      MINIMUM = 0.9 MAXIMUM = 1.1 /
&MRND ID = 'Scaling Front Hall width' DISTRIBUTION_TYPE = 'UNIFORM'
      MINIMUM = 0.9 MAXIMUM = 1.1 /
&MRND ID = 'Scaling Front Hall depth' DISTRIBUTION_TYPE = 'UNIFORM'
      MINIMUM = 0.9 MAXIMUM = 1.1 /
&MRND ID = 'Scaling Back Hall width' DISTRIBUTION_TYPE = 'UNIFORM'
      MINIMUM = 0.9 MAXIMUM = 1.1 /
&MRND ID = 'Scaling Back Hall depth' DISTRIBUTION_TYPE = 'UNIFORM'
      MINIMUM = 0.9 MAXIMUM = 1.1 /
&MRND ID = 'Scaling Front Door Height' DISTRIBUTION_TYPE = 'UNIFORM'
      MINIMUM = 0.9 MAXIMUM = 1.1 /
&MRND ID = 'Scaling Front Door Width' DISTRIBUTION_TYPE = 'UNIFORM'
      MINIMUM = 0.9 MAXIMUM = 1.1 /
&MRND ID = 'Scaling Office #1 Door Height' DISTRIBUTION_TYPE = 'UNIFORM'
      MINIMUM = 0.9 MAXIMUM = 1.1 /
&MRND ID = 'Scaling Office #2 Door Height' DISTRIBUTION_TYPE = 'UNIFORM'
      MINIMUM = 0.9 MAXIMUM = 1.1 /
&MRND ID = 'Scaling Office #3 Door Height' DISTRIBUTION_TYPE = 'UNIFORM'
      MINIMUM = 0.9 MAXIMUM = 1.1 /
&MRND ID = 'Scaling Office #4 Door Height' DISTRIBUTION_TYPE = 'UNIFORM'
      MINIMUM = 0.9 MAXIMUM = 1.1 /
&MRND ID = 'Scaling Office #5 Door Height' DISTRIBUTION_TYPE = 'UNIFORM'
      MINIMUM = 0.9 MAXIMUM = 1.1 /
&MRND ID = 'Scaling Office #6 Door Height' DISTRIBUTION_TYPE = 'UNIFORM'
      MINIMUM = 0.9 MAXIMUM = 1.1 /
&MRND ID = 'Scaling Office #1 Door Width' DISTRIBUTION_TYPE = 'UNIFORM'
      MINIMUM = 0.9 MAXIMUM = 1.1 /
&MRND ID = 'Scaling Office #2 Door Width' DISTRIBUTION_TYPE = 'UNIFORM'
      MINIMUM = 0.9 MAXIMUM = 1.1 /
&MRND ID = 'Scaling Office #3 Door Width' DISTRIBUTION_TYPE = 'UNIFORM'
      MINIMUM = 0.9 MAXIMUM = 1.1 /
&MRND ID = 'Scaling Office #4 Door Width' DISTRIBUTION_TYPE = 'UNIFORM'
      MINIMUM = 0.9 MAXIMUM = 1.1 /
&MRND ID = 'Scaling Office #5 Door Width' DISTRIBUTION_TYPE = 'UNIFORM'
      MINIMUM = 0.9 MAXIMUM = 1.1 /
&MRND ID = 'Scaling Office #6 Door Width' DISTRIBUTION_TYPE = 'UNIFORM'
      MINIMUM = 0.9 MAXIMUM = 1.1 /
&MRND ID = 'Scaling Foyer2FrontHall width' DISTRIBUTION_TYPE = 'UNIFORM'
      MINIMUM = 0.9 MAXIMUM = 1.1 /
&MRND ID = 'Scaling Foyer2EvenHall width' DISTRIBUTION_TYPE = 'UNIFORM'
      MINIMUM = 0.9 MAXIMUM = 1.1 /
&MRND ID = 'Scaling Foyer2OddHall width' DISTRIBUTION_TYPE = 'UNIFORM'
      MINIMUM = 0.9 MAXIMUM = 1.1 /
&MRND ID = 'Scaling FrontHall2EvenHall width' DISTRIBUTION_TYPE = 'UNIFORM'
      MINIMUM = 0.9 MAXIMUM = 1.1 /
&MRND ID = 'Scaling FrontHall2OddHall width' DISTRIBUTION_TYPE = 'UNIFORM'
      MINIMUM = 0.9 MAXIMUM = 1.1 /
&MRND ID = 'Scaling BackHall2EvenHall width' DISTRIBUTION_TYPE = 'UNIFORM'
      MINIMUM = 0.9 MAXIMUM = 1.1 /
&MRND ID = 'Scaling BackHall2OddHall width' DISTRIBUTION_TYPE = 'UNIFORM'
      MINIMUM = 0.9 MAXIMUM = 1.1 /
&MRND ID = 'Scaling MV in #1' DISTRIBUTION_TYPE = 'UNIFORM'
      MINIMUM = 0.9 MAXIMUM = 1.1 /
&MRND ID = 'Scaling MV in #2' DISTRIBUTION_TYPE = 'UNIFORM'
      MINIMUM = 0.9 MAXIMUM = 1.1 /
&MRND ID = 'Scaling MV out #1' DISTRIBUTION_TYPE = 'UNIFORM'
      MINIMUM = 0.9 MAXIMUM = 1.1 /
&MRND ID = 'Scaling MV out #2' DISTRIBUTION_TYPE = 'UNIFORM'
      MINIMUM = 0.9 MAXIMUM = 1.1 /
&MRND ID = 'Scaling HRR' DISTRIBUTION_TYPE = 'UNIFORM'
      MINIMUM = 0.9 MAXIMUM = 1.1 /
&MRND ID = 'Scaling Time' DISTRIBUTION_TYPE = 'UNIFORM'
      MINIMUM = 0.9 MAXIMUM = 1.1 /
 
!! Monte-Carlo Field Definitions
&MFLD ID = 'Lab ceiling thickness'  FIELD_TYPE = 'SCALING'
      PARAMETER_COLUMN_LABEL = 'Lab_ceiling_thickness'  ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'Lab floor thickness'  FIELD_TYPE = 'SCALING'
      PARAMETER_COLUMN_LABEL = 'Lab_floor_thickness'  ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'Lab wall thickness'  FIELD_TYPE = 'SCALING'
      PARAMETER_COLUMN_LABEL = 'Lab_wall_thickness'  ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'Gyp Conductivity'  FIELD_TYPE = 'SCALING'
      PARAMETER_COLUMN_LABEL = 'Gyp_Conductivity'  ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'Gyp Density'  FIELD_TYPE = 'SCALING'
      PARAMETER_COLUMN_LABEL = 'Gyp_Density'  ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'Gyp Specific Heat'  FIELD_TYPE = 'SCALING'
      PARAMETER_COLUMN_LABEL = 'Gyp_Specific_Heat'  ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'Gyp Emissivity'  FIELD_TYPE = 'SCALING'
      PARAMETER_COLUMN_LABEL = 'Gyp_Emissivity'  ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'Concrete Conductivity'  FIELD_TYPE = 'SCALING'
      PARAMETER_COLUMN_LABEL = 'Gyp_Conductivity'  ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'Concrete Density'  FIELD_TYPE = 'SCALING'
      PARAMETER_COLUMN_LABEL = 'Gyp_Density'  ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'Concrete Specific Heat'  FIELD_TYPE = 'SCALING'
      PARAMETER_COLUMN_LABEL = 'Gyp_Specific_Heat'  ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'Concrete Emissivity'  FIELD_TYPE = 'SCALING'
      PARAMETER_COLUMN_LABEL = 'Gyp_Emissivity'  ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'Lab width'  FIELD_TYPE = 'SCALING'
      PARAMETER_COLUMN_LABEL = 'Lab_width'  ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'Lab depth'  FIELD_TYPE = 'SCALING'
      PARAMETER_COLUMN_LABEL = 'Lab_depth'  ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'Lab height'  FIELD_TYPE = 'SCALING'
      PARAMETER_COLUMN_LABEL = 'Lab_height'  ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'Even Hallway width'  FIELD_TYPE = 'SCALING'
      PARAMETER_COLUMN_LABEL = 'Even_Hallway_width'  ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'Even Hallway depth'  FIELD_TYPE = 'SCALING'
      PARAMETER_COLUMN_LABEL = 'Even_Hallway_depth'  ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'Odd Hallway width'  FIELD_TYPE = 'SCALING'
      PARAMETER_COLUMN_LABEL = 'Odd_Hallway_width'  ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'Odd Hallway depth'  FIELD_TYPE = 'SCALING'
      PARAMETER_COLUMN_LABEL = 'Odd_Hallway_depth'  ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'Front Hall width'  FIELD_TYPE = 'SCALING'
      PARAMETER_COLUMN_LABEL = 'Front_Hall_width'  ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'Front Hall depth'  FIELD_TYPE = 'SCALING'
      PARAMETER_COLUMN_LABEL = 'Front_Hall_depth'  ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'Back Hall width'  FIELD_TYPE = 'SCALING'
      PARAMETER_COLUMN_LABEL = 'Back_Hall_width'  ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'Back Hall depth'  FIELD_TYPE = 'SCALING'
      PARAMETER_COLUMN_LABEL = 'Back_Hall_depth'  ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'Foyer width'  FIELD_TYPE = 'SCALING'
      PARAMETER_COLUMN_LABEL = 'Foyer_width'  ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'Foyer depth'  FIELD_TYPE = 'SCALING'
      PARAMETER_COLUMN_LABEL = 'Foyer_depth'  ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'Office #1 width'  FIELD_TYPE = 'SCALING'
      PARAMETER_COLUMN_LABEL = 'Office_#1_width'  ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'Office #2 width'  FIELD_TYPE = 'SCALING'
      PARAMETER_COLUMN_LABEL = 'Office_#2_width'  ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'Office #3 width'  FIELD_TYPE = 'SCALING'
      PARAMETER_COLUMN_LABEL = 'Office_#3_width'  ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'Office #4 width'  FIELD_TYPE = 'SCALING'
      PARAMETER_COLUMN_LABEL = 'Office_#3_width'  ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'Office #5 width'  FIELD_TYPE = 'SCALING'
      PARAMETER_COLUMN_LABEL = 'Office_#3_width'  ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'Office #6 width'  FIELD_TYPE = 'SCALING'
      PARAMETER_COLUMN_LABEL = 'Office_#3_width'  ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'Office #1 depth'  FIELD_TYPE = 'SCALING'
      PARAMETER_COLUMN_LABEL = 'Office_#1_depth'  ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'Office #2 depth'  FIELD_TYPE = 'SCALING'
      PARAMETER_COLUMN_LABEL = 'Office_#2_depth'  ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'Office #3 depth'  FIELD_TYPE = 'SCALING'
      PARAMETER_COLUMN_LABEL = 'Office_#3_depth'  ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'Office #4 depth'  FIELD_TYPE = 'SCALING'
      PARAMETER_COLUMN_LABEL = 'Office_#4_depth'  ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'Office #5 depth'  FIELD_TYPE = 'SCALING'
      PARAMETER_COLUMN_LABEL = 'Office_#5_depth'  ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'Office #6 depth'  FIELD_TYPE = 'SCALING'
      PARAMETER_COLUMN_LABEL = 'Office_#6_depth'  ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'Office #1 depth'  FIELD_TYPE = 'SCALING'
      PARAMETER_COLUMN_LABEL = 'Office_#1_height'  ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'Office #2 depth'  FIELD_TYPE = 'SCALING'
      PARAMETER_COLUMN_LABEL = 'Office_#2_height'  ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'Office #3 depth'  FIELD_TYPE = 'SCALING'
      PARAMETER_COLUMN_LABEL = 'Office_#3_height'  ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'Office #4 depth'  FIELD_TYPE = 'SCALING'
      PARAMETER_COLUMN_LABEL = 'Office_#4_height'  ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'Office #5 depth'  FIELD_TYPE = 'SCALING'
      PARAMETER_COLUMN_LABEL = 'Office_#5_height'  ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'Office #6 depth'  FIELD_TYPE = 'SCALING'
      PARAMETER_COLUMN_LABEL = 'Office_#6_height'  ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'Foyer height'  FIELD_TYPE = 'SCALING'
      PARAMETER_COLUMN_LABEL = 'Foyer_and_Halls_height'  ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'Even Hallway height'  FIELD_TYPE = 'SCALING'
      ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'Odd Hallway height'  FIELD_TYPE = 'SCALING'
      ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'Front Hall height'  FIELD_TYPE = 'SCALING'
      ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'Back Hall height'  FIELD_TYPE = 'SCALING'
      ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'Bathroom Hallway height'  FIELD_TYPE = 'SCALING'
      ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'Front Door Height'  FIELD_TYPE = 'SCALING'
      PARAMETER_COLUMN_LABEL = 'Front_Door_Height'  ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'Front Door Width'  FIELD_TYPE = 'SCALING'
      PARAMETER_COLUMN_LABEL = 'Front_Door_Width'  ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'Office #1 Door Height'  FIELD_TYPE = 'SCALING'
      PARAMETER_COLUMN_LABEL = 'Ofice_#1__Door_Height'  ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'Office #2 Door Height'  FIELD_TYPE = 'SCALING'
      PARAMETER_COLUMN_LABEL = 'Ofice_#2__Door_Height'  ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'Office #3 Door Height'  FIELD_TYPE = 'SCALING'
      PARAMETER_COLUMN_LABEL = 'Ofice_#3__Door_Height'  ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'Office #4 Door Height'  FIELD_TYPE = 'SCALING'
      PARAMETER_COLUMN_LABEL = 'Ofice_#4__Door_Height'  ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'Office #5 Door Height'  FIELD_TYPE = 'SCALING'
      PARAMETER_COLUMN_LABEL = 'Ofice_#5__Door_Height'  ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'Office #6 Door Height'  FIELD_TYPE = 'SCALING'
      PARAMETER_COLUMN_LABEL = 'Ofice_#6__Door_Height'  ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'Office #1 Door Width'  FIELD_TYPE = 'SCALING'
      PARAMETER_COLUMN_LABEL = 'Ofice_#1__Door_Width'  ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'Office #2 Door Width'  FIELD_TYPE = 'SCALING'
      PARAMETER_COLUMN_LABEL = 'Ofice_#2__Door_Width'  ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'Office #3 Door Width'  FIELD_TYPE = 'SCALING'
      PARAMETER_COLUMN_LABEL = 'Ofice_#3__Door_Width'  ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'Office #4 Door Width'  FIELD_TYPE = 'SCALING'
      PARAMETER_COLUMN_LABEL = 'Ofice_#4__Door_Width'  ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'Office #5 Door Width'  FIELD_TYPE = 'SCALING'
      PARAMETER_COLUMN_LABEL = 'Ofice_#5__Door_Width'  ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'Office #6 Door Width'  FIELD_TYPE = 'SCALING'
      PARAMETER_COLUMN_LABEL = 'Ofice_#6__Door_Width'  ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'Foyer2FrontHall height'  FIELD_TYPE = 'SCALING'
      ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'Foyer2EvenHall height'  FIELD_TYPE = 'SCALING'
      ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'Foyer2OddHall height'  FIELD_TYPE = 'SCALING'
      ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'FrontHall2EvenHall height'  FIELD_TYPE = 'SCALING'
      ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'FrontHall2OddHall height'  FIELD_TYPE = 'SCALING'
      ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'BackHall2EvenHall height'  FIELD_TYPE = 'SCALING'
      ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'BackHall2OddHall height'  FIELD_TYPE = 'SCALING'
      ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'Foyer2FrontHall width'  FIELD_TYPE = 'SCALING'
      ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'Foyer2EvenHall width'  FIELD_TYPE = 'SCALING'
      ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'Foyer2OddHall width'  FIELD_TYPE = 'SCALING'
      ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'FrontHall2EvenHall width'  FIELD_TYPE = 'SCALING'
      ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'FrontHall2OddHall width'  FIELD_TYPE = 'SCALING'
      ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'BackHall2EvenHall width'  FIELD_TYPE = 'SCALING'
      ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'BackHall2OddHall width'  FIELD_TYPE = 'SCALING'
      ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'MV in #1 flow'  FIELD_TYPE = 'SCALING'
      PARAMETER_COLUMN_LABEL = 'MV_in_#1_flow'  ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'MV in #2 flow'  FIELD_TYPE = 'SCALING'
      PARAMETER_COLUMN_LABEL = 'MV_in_#2_flow'  ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'MV out #1 flow'  FIELD_TYPE = 'SCALING'
      PARAMETER_COLUMN_LABEL = 'MV_out_#1_flow'  ADD_TO_PARAMETERS = .FALSE. /
&MFLD ID = 'MV out #2 flow'  FIELD_TYPE = 'SCALING'
      PARAMETER_COLUMN_LABEL = 'MV_out_#2_flow'  ADD_TO_PARAMETERS = .FALSE. /
 
!! Monte Carlo Fire Specifications
&MFIR ID = 'Scale fire'  FIRE_ID = 'Fire'
      BASE_FIRE_ID = 'Base Fire'
      SCALING_FIRE_HRR_RANDOM_GENERATOR_ID = 'Scaling HRR'  SCALING_FIRE_TIME_RANDOM_GENERATOR_ID = 'Scaling Time
 
&TAIL /
@rpeacoc
Copy link
Contributor Author

rpeacoc commented Apr 11, 2024

This issue has additional problems. With the simple test case below (a / missing on the Z plane SLCF input, CEdit doesn't throw and error, doesn't die, but totally ignores the input without any indication of an error.

&HEAD VERSION = 7700, TITLE = 'CFAST Simulation' /
 
!! Scenario Configuration 
&TIME SIMULATION = 3600 PRINT = 60 SMOKEVIEW = 15 SPREADSHEET = 15 / 
&INIT PRESSURE = 101325 RELATIVE_HUMIDITY = 50 INTERIOR_TEMPERATURE = 20 EXTERIOR_TEMPERATURE = 20 /
&MISC  / 
 
!! Compartments 
&COMP ID = 'Comp 1'
      DEPTH = 3.048 HEIGHT = 2.4384 WIDTH = 3.048
      ORIGIN = 0, 0, 0 GRID = 50, 50, 50 /
 
!! Visualizations
&SLCF COMP_ID = 'Comp 1' DOMAIN = '2-D'  POSITION = 1.524, PLANE = 'X' / 
&SLCF COMP_ID = 'Comp 1' DOMAIN = '2-D'  POSITION = 1.524, PLANE = 'Y' / 
&SLCF COMP_ID = 'Comp 1' DOMAIN = '2-D'  POSITION = 2.414016, PLANE = 'Z'
&SLCF DOMAIN = '3-D' / 
 
&TAIL /

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees

@preneke preneke

Labels
bug Component-CEDit
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
2 participants
@rpeacoc @preneke