From 009d92b7b8871925153536a1ea58762ba65087db Mon Sep 17 00:00:00 2001 From: runner Date: Wed, 25 Sep 2024 20:24:10 +0000 Subject: [PATCH] Generate develop docs --- docs/develop/README.md | 1 + docs/develop/dev/modules/README.md | 20 ++++++++++---------- 2 files changed, 11 insertions(+), 10 deletions(-) diff --git a/docs/develop/README.md b/docs/develop/README.md index 6a691123..1f060422 100644 --- a/docs/develop/README.md +++ b/docs/develop/README.md @@ -132,6 +132,7 @@ sensor_inputs: - SHT4x temperature and humidity sensor (`sht4x`) - TSL2561 luminosity sensor (`tsl2561`) - VEML 6075 UV sensor (`veml6075`) + - VEML7700 luminosity sensor (`veml7700`) ### Streams diff --git a/docs/develop/dev/modules/README.md b/docs/develop/dev/modules/README.md index 14d3a443..c9a1ab7a 100644 --- a/docs/develop/dev/modules/README.md +++ b/docs/develop/dev/modules/README.md @@ -6,7 +6,7 @@ In order to support as much hardware as possible without changing the project's In order for a module to specify its requirements, a module-level constant is used which lists them in the same format as the `pip install` command. -[mqtt_io.modules.gpio.raspberrypi:REQUIREMENTS](https://github.com/flyte/mqtt-io/blob/ad8514cd1131a75fc6dec289b4ca2a3c03722532/mqtt_io/modules/gpio/raspberrypi.py#L13): +[mqtt_io.modules.gpio.raspberrypi:REQUIREMENTS](https://github.com/flyte/mqtt-io/blob/e4af3830396fd58a39b687a69650ccc43cef3555/mqtt_io/modules/gpio/raspberrypi.py#L13): ```python REQUIREMENTS = ("RPi.GPIO",) @@ -22,7 +22,7 @@ To specify extra schema for the pin-level config sections (`digital_inputs`, `di If the pin-level schema only applies to an input or an output (in the case of a GPIO module), then instead of setting it on the `PIN_SCHEMA` class-level constant, use `INPUT_SCHEMA` or `OUTPUT_SCHEMA` respectively. -[mqtt_io.modules.gpio.gpiod:CONFIG_SCHEMA](https://github.com/flyte/mqtt-io/blob/ad8514cd1131a75fc6dec289b4ca2a3c03722532/mqtt_io/modules/gpio/gpiod.py#L18): +[mqtt_io.modules.gpio.gpiod:CONFIG_SCHEMA](https://github.com/flyte/mqtt-io/blob/e4af3830396fd58a39b687a69650ccc43cef3555/mqtt_io/modules/gpio/gpiod.py#L18): ```python CONFIG_SCHEMA = { @@ -40,7 +40,7 @@ CONFIG_SCHEMA = { During software startup, each GPIO module's `setup_module()` method will be called once per instance of the module in the `gpio_modules` section of the config file. -[mqtt_io.modules.gpio:GenericGPIO.setup_module](https://github.com/flyte/mqtt-io/blob/ad8514cd1131a75fc6dec289b4ca2a3c03722532/mqtt_io/modules/gpio/__init__.py#L109): +[mqtt_io.modules.gpio:GenericGPIO.setup_module](https://github.com/flyte/mqtt-io/blob/e4af3830396fd58a39b687a69650ccc43cef3555/mqtt_io/modules/gpio/__init__.py#L109): ```python def setup_module(self) -> None: @@ -73,7 +73,7 @@ The GPIO library is then initialised and an object may be stored (usually at `se It may be appropriate to build mappings of pin directions (input, output), pullups (up, down, off) and interrupt edges (rising, falling, both) if appropriate for this hardware. The base GenericGPIO class uses its own constants to refer to these, so the mappings translate the base GenericGPIO's constants to ones used by the hardware's Python library. -[mqtt_io.modules.gpio:PinDirection](https://github.com/flyte/mqtt-io/blob/ad8514cd1131a75fc6dec289b4ca2a3c03722532/mqtt_io/modules/gpio/__init__.py#L22): +[mqtt_io.modules.gpio:PinDirection](https://github.com/flyte/mqtt-io/blob/e4af3830396fd58a39b687a69650ccc43cef3555/mqtt_io/modules/gpio/__init__.py#L22): ```python class PinDirection(Enum): @@ -85,7 +85,7 @@ class PinDirection(Enum): OUTPUT = auto() ``` -[mqtt_io.modules.gpio:PinPUD](https://github.com/flyte/mqtt-io/blob/ad8514cd1131a75fc6dec289b4ca2a3c03722532/mqtt_io/modules/gpio/__init__.py#L31): +[mqtt_io.modules.gpio:PinPUD](https://github.com/flyte/mqtt-io/blob/e4af3830396fd58a39b687a69650ccc43cef3555/mqtt_io/modules/gpio/__init__.py#L31): ```python class PinPUD(Enum): @@ -98,7 +98,7 @@ class PinPUD(Enum): DOWN = auto() ``` -[mqtt_io.modules.gpio:InterruptEdge](https://github.com/flyte/mqtt-io/blob/ad8514cd1131a75fc6dec289b4ca2a3c03722532/mqtt_io/modules/gpio/__init__.py#L41): +[mqtt_io.modules.gpio:InterruptEdge](https://github.com/flyte/mqtt-io/blob/e4af3830396fd58a39b687a69650ccc43cef3555/mqtt_io/modules/gpio/__init__.py#L41): ```python class InterruptEdge(Enum): @@ -113,7 +113,7 @@ class InterruptEdge(Enum): The `raspberrypi` GPIO module is a good example of the above: -[mqtt_io.modules.gpio.raspberrypi:GPIO.setup_module](https://github.com/flyte/mqtt-io/blob/ad8514cd1131a75fc6dec289b4ca2a3c03722532/mqtt_io/modules/gpio/raspberrypi.py#L23): +[mqtt_io.modules.gpio.raspberrypi:GPIO.setup_module](https://github.com/flyte/mqtt-io/blob/e4af3830396fd58a39b687a69650ccc43cef3555/mqtt_io/modules/gpio/raspberrypi.py#L23): ```python def setup_module(self) -> None: @@ -142,7 +142,7 @@ def setup_module(self) -> None: If a digital input is not configured as an [interrupt](config/interrupts.md) (or even [sometimes if it is](config/reference/digital_inputs/?id=digital_inputs-star-interrupt_for)), then a loop will be created which polls the pin's current value and publishes a `DigitalInputChangedEvent` event when it does. As part of the initialisation of each pin, a callback function to publish the new value on MQTT will be subscribed to this event. -[mqtt_io.server.MqttIo._init_digital_inputs](https://github.com/flyte/mqtt-io/blob/ad8514cd1131a75fc6dec289b4ca2a3c03722532/mqtt_io/server.py#L377): +[mqtt_io.server.MqttIo._init_digital_inputs](https://github.com/flyte/mqtt-io/blob/e4af3830396fd58a39b687a69650ccc43cef3555/mqtt_io/server.py#L377): ```python def _init_digital_inputs(self) -> None: @@ -175,7 +175,7 @@ def _init_digital_inputs(self) -> None: For each of the entries in `digital_inputs` and `digital_outputs`, `setup_pin()` will be called. This step is for configuring the hardware's pins to be input or outputs, or anything else that must be set at pin level. -[mqtt_io.modules.gpio:GenericGPIO.setup_pin](https://github.com/flyte/mqtt-io/blob/ad8514cd1131a75fc6dec289b4ca2a3c03722532/mqtt_io/modules/gpio/__init__.py#L118): +[mqtt_io.modules.gpio:GenericGPIO.setup_pin](https://github.com/flyte/mqtt-io/blob/e4af3830396fd58a39b687a69650ccc43cef3555/mqtt_io/modules/gpio/__init__.py#L118): ```python def setup_pin( @@ -214,7 +214,7 @@ digital_outputs: Here's the `raspberrypi` GPIO module's `setup_pin()` implementation: -[mqtt_io.modules.gpio.raspberrypi:GPIO.setup_pin](https://github.com/flyte/mqtt-io/blob/ad8514cd1131a75fc6dec289b4ca2a3c03722532/mqtt_io/modules/gpio/raspberrypi.py#L44): +[mqtt_io.modules.gpio.raspberrypi:GPIO.setup_pin](https://github.com/flyte/mqtt-io/blob/e4af3830396fd58a39b687a69650ccc43cef3555/mqtt_io/modules/gpio/raspberrypi.py#L44): ```python def setup_pin(