Skip to content

Latest commit

 

History

History
150 lines (75 loc) · 2.83 KB

README.md

File metadata and controls

150 lines (75 loc) · 2.83 KB
Raw

pigator

https://busware.de/tiki-index.php?page=PIG_OW_Installation

power save

dtoverlay=disable-wifi dtparam=act_led_trigger=none dtparam=act_led_activelow=on

vim /et/rc.local /usr/bin/tvservice -o

usb quirks

usb-storage.quirks=174c:55aa:u

setup onewire

sudo raspi-config

  1. 5 - Interfacing Options
  2. P6 - serial
  3. "Would you like a login shell to be accessible over serial?" -> No
  4. " Would you like the serial port hardware to be enabled?" -> Yes

sudo vim /boot/config.txt

add at the end of the file:

dtoverlay=disable-bt

dtparam=i2c_arm=on

sudo systemctl disable hciuart

sudo vim /etc/modules

dazugeben: i2c_dev

sudo modprobe i2c_dev

sudo apt-get install owfs

sudo vim /etc/owfs.conf

#server: FAKE = DS18S20,DS2405

server: i2c = ALL:ALL

reboot the pi

sudo owfs --i2c=ALL:ALL --allow_other /mnt/

ls /mnt/ as root

not working: browse to http://ip_or_raspberry:2121

setup rtc

sudo echo ds1307 0x68 > /sys/class/i2c-adapter/i2c-1/new_device

sleep 2

sudo hwclock

sudo hwclock -w

sudo hwclock -s

sudo apt-get -y remove fake-hwclock

sudo rm /etc/cron.hourly/fake-hwclock

sudo update-rc.d -f fake-hwclock remove

sudo rm /etc/init.d/fake-hwclock

sudo systemctl enable hwclock.sh

install node-red

apt install build-essential git

install knxd

https://wiki.fhem.de/wiki/Knxd https://community.openhab.org/t/guide-to-setup-knxd-with-busware-rot-on-raspberry-3b-as-knx-ip-gateway/66359

sudo apt-get update

sudo apt-get install debhelper cdbs automake libtool libusb-1.0-0-dev git-core build-essential libsystemd-dev dh-systemd libev-dev cmake

git clone https://github.com/knxd/knxd.git

cd knxd

git checkout debian

dpkg-buildpackage -b -uc

cd ..

sudo dpkg -i knxd_.deb knxd-tools_.deb

sudo udevadm info -a /dev/ttyAMA0 | grep KERNELS.*serial

sudo udevadm info -a /dev/ttyAMA0 | grep {id}

sudo vim /etc/udev/rules.d/70-knxd.rules

ACTION=="add", SUBSYSTEM=="tty", ATTRS{id}=="00241011", KERNELS=="fe201000.serial", SYMLINK+="ttyKNX1", OWNER="knxd"

sudo reboot

ls -ahl /dev/ttyKNX1 (lrwxrwxrwx 1 root root 7 Feb 14 2019 /dev/ttyKNX1 -> ttyAMA0)

ls -ahl /dev/ttyAMA0 (crw-rw---- 1 knxd dialout 204, 64 Feb 14 2019 /dev/ttyAMA0)

sudo vim /etc/knxd.conf

KNXD_OPTS="-e 1.1.0 -E 1.1.100:28 -D -T -R -S -b tpuarts:/dev/ttyKNX1"

systemctl status knxd.socket && systemctl status knxd.service

sudo systemctl enable knxd.socket sudo systemctl enable knxd.service

homeassistant tunnel ip in configuration.yml kontrolliren ob mit docker bridge ip aus ifconfig zusammenpasst

homegear für homematic

UART5 aufdrehen: /boot/config.txt -> dtoverlay=uart5

If you’re using the official Raspbian, you need to comment the lines containing “gpio” in file /etc/udev/rules.d/99-com.rules (place a “#” at the beginning of the lines) for Homegear to be able to access the GPIOs.

traefik

acme muss auf chmod 600 gestellt sein