diff --git a/config.ini b/config.ini
index 408d268..0eed33d 100644
--- a/config.ini
+++ b/config.ini
@@ -1,43 +1,47 @@
-#
-#  ██████  ██  ██████   ██████  ██      ███████     ████████ ███████  ██████ ██   ██  
-# ██       ██ ██       ██       ██      ██             ██    ██      ██      ██   ██  
-# ██   ███ ██ ██   ███ ██   ███ ██      █████          ██    █████   ██      ███████  
-# ██    ██ ██ ██    ██ ██    ██ ██      ██             ██    ██      ██      ██   ██  
-#  ██████  ██  ██████   ██████  ███████ ███████        ██    ███████  ██████ ██   ██  
-# 
-# OSC Router Configuration
-#
-  [Setup]
-#
-# Port listening for OSC [Default 9001]	
-#
-  port_rx = 9001
-#
-# IP Address of Headpat Device
-  device_ips = GIGGLE.TECH.DEVICE.IP
-#
-# Unity Proximity parameter[s]
-  proximity_parameters_multi = proximity_01 
-#
- max_speed_parameter = max_speed
-# 
-advanced_mode = true
-#
- [Config]
-#
-# Min Speed of Haptic Motor [5-100]
-  min_speed = 2
-#
-# Max Speed of Haptic Motor [Recommend 25]			
-  max_speed = 25
-#
-# Max Speed Scalar [10-100]
-  max_speed_scale = 100
-#
-# OSC Timeout [seconds]
-  timeout = 5
-		
+# Giggle Tech OSC Router Configuration
+
+[Setup]
+# Port listening for OSC (Default: 9001)
+port_rx = 9001
+
+# IP Addresses of Headpat Devices
+# Enter your device IP address here
+ device_ips = YOUR.DEVICE.IP.HERE
+
+# Example of how to enter multiple device IPs:
+# device_ips = 192.168.1.69 192.168.1.70 192.168.1.99 192.168.1.72
+
+# Unity Proximity Parameters
+# Specify the Unity proximity parameter
+#proximity_parameters_multi = proximity_01
+
+# Example of how to use multiple devices:
+# proximity_parameters_multi = proximity_01 proximity_02 proximity_03 proximity_04
+
+# Maximum Speed Parameter
+max_speed_parameter = max_speed
+
+# Velocity Control Mode (True = Velocity / False = Proximity)
+# Note: This mode is not tested for multiple devices. Refer to Discord for more information.
+# Adjustments can be made in the advanced section below.
+advanced_mode = false
+
+[Config]
+# Minimum Speed of Haptic Motor (5-100)
+min_speed = 2
+
+# Maximum Speed of Haptic Motor (Recommended: 5-25)
+max_speed = 25
+
+# Maximum Speed Scalar (10-100)
+max_speed_scale = 100
+
+# OSC Timeout (seconds)
+timeout = 5
+
 [Advanced]
+# Velocity Control Parameters
+# Adjust these parameters to achieve the desired effect.
 outer_proximity = 0
 inner_proximity = 0.7
 velocity_scalar = 20