diff --git a/content/actions/hosting-your-own-runners/managing-self-hosted-runners-with-actions-runner-controller/about-actions-runner-controller.md b/content/actions/hosting-your-own-runners/managing-self-hosted-runners-with-actions-runner-controller/about-actions-runner-controller.md index d03c3b30f9bc..a4b724f7e673 100644 --- a/content/actions/hosting-your-own-runners/managing-self-hosted-runners-with-actions-runner-controller/about-actions-runner-controller.md +++ b/content/actions/hosting-your-own-runners/managing-self-hosted-runners-with-actions-runner-controller/about-actions-runner-controller.md @@ -49,7 +49,7 @@ ARC consists of a set of resources, some of which are created specifically for A Each resource that is deployed by ARC is given a name composed of: - an installation name, which is the installation name you specify when you install the Helm chart. -- a resource identification suffix, which is is a string that identifies the resource type. This value is not configurable. +- a resource identification suffix, which is a string that identifies the resource type. This value is not configurable. {% note %} diff --git a/content/actions/migrating-to-github-actions/automated-migrations/automating-migration-with-github-actions-importer.md b/content/actions/migrating-to-github-actions/automated-migrations/automating-migration-with-github-actions-importer.md index 3070450e1a92..2ba87d2b3c4b 100644 --- a/content/actions/migrating-to-github-actions/automated-migrations/automating-migration-with-github-actions-importer.md +++ b/content/actions/migrating-to-github-actions/automated-migrations/automating-migration-with-github-actions-importer.md @@ -155,7 +155,7 @@ Commands: circle-ci Convert a CircleCI pipeline to GitHub Actions workflows and open a pull request with the changes. gitlab Convert a GitLab pipeline to a GitHub Actions workflow and open a pull request with the changes. jenkins Convert a Jenkins job to a GitHub Actions workflow and open a pull request with the changes. - travis-ci Convert a Travis CI pipeline to a GitHub Actions workflow and and open a pull request with the changes. + travis-ci Convert a Travis CI pipeline to a GitHub Actions workflow and open a pull request with the changes. ``` ## Performing self-serve migrations using IssueOps diff --git a/content/actions/migrating-to-github-actions/automated-migrations/migrating-from-circleci-with-github-actions-importer.md b/content/actions/migrating-to-github-actions/automated-migrations/migrating-from-circleci-with-github-actions-importer.md index 08f537c5d6dd..fda0d73d2d13 100644 --- a/content/actions/migrating-to-github-actions/automated-migrations/migrating-from-circleci-with-github-actions-importer.md +++ b/content/actions/migrating-to-github-actions/automated-migrations/migrating-from-circleci-with-github-actions-importer.md @@ -297,7 +297,7 @@ For example: gh actions-importer audit circle-ci --output-dir ./output/ --include-from repositories.txt ``` -The file supplied for this parameter must be a a line-delimited list of repositories, for example: +The file supplied for this parameter must be a line-delimited list of repositories, for example: ```text repository_one diff --git a/content/apps/github-marketplace/listing-an-app-on-github-marketplace/deleting-your-app-listing-from-github-marketplace.md b/content/apps/github-marketplace/listing-an-app-on-github-marketplace/deleting-your-app-listing-from-github-marketplace.md index 759025323a12..277ee8a06855 100644 --- a/content/apps/github-marketplace/listing-an-app-on-github-marketplace/deleting-your-app-listing-from-github-marketplace.md +++ b/content/apps/github-marketplace/listing-an-app-on-github-marketplace/deleting-your-app-listing-from-github-marketplace.md @@ -14,7 +14,7 @@ redirect_from: {% data reusables.marketplace.marketplace-apps-not-actions %} -You can follow these steps to remove your app from {% data variables.product.prodname_marketplace %}. The listing will be removed from {% data variables.product.prodname_marketplace %} immediately. Existing subscriptions will be canceled at the end of the current billing cycle. Although the app will be removed from {% data variables.product.prodname_marketplace %}, you will not be able to delete your app until the the current billing cycle ends. +You can follow these steps to remove your app from {% data variables.product.prodname_marketplace %}. The listing will be removed from {% data variables.product.prodname_marketplace %} immediately. Existing subscriptions will be canceled at the end of the current billing cycle. Although the app will be removed from {% data variables.product.prodname_marketplace %}, you will not be able to delete your app until the current billing cycle ends. {% data reusables.apps.settings-step %} diff --git a/content/apps/oauth-apps/using-oauth-apps/connecting-with-third-party-applications.md b/content/apps/oauth-apps/using-oauth-apps/connecting-with-third-party-applications.md index 3ccc27bbca2d..1c4595924c20 100644 --- a/content/apps/oauth-apps/using-oauth-apps/connecting-with-third-party-applications.md +++ b/content/apps/oauth-apps/using-oauth-apps/connecting-with-third-party-applications.md @@ -20,7 +20,7 @@ When a third-party application wants to identify you by your {% data variables.p ## Contacting the application developer -Because an application is developed by a third-party who isn't {% data variables.product.product_name %}, we don't know exactly how an application uses the data it's requesting access to. If you have questions or concerns about an application, you should contact the application developer. To find contact information for an application, you can click the account name of the developer at the top of of the app's authorization page. +Because an application is developed by a third-party who isn't {% data variables.product.product_name %}, we don't know exactly how an application uses the data it's requesting access to. If you have questions or concerns about an application, you should contact the application developer. To find contact information for an application, you can click the account name of the developer at the top of the app's authorization page. If the developer has chosen to supply further information, the right-hand side of the authorization page may also provide a detailed description of the application, as well as its associated website. diff --git a/content/code-security/code-scanning/integrating-with-code-scanning/sarif-support-for-code-scanning.md b/content/code-security/code-scanning/integrating-with-code-scanning/sarif-support-for-code-scanning.md index 96bf4a99bfd9..45bf3e96f015 100644 --- a/content/code-security/code-scanning/integrating-with-code-scanning/sarif-support-for-code-scanning.md +++ b/content/code-security/code-scanning/integrating-with-code-scanning/sarif-support-for-code-scanning.md @@ -113,7 +113,7 @@ You can check a SARIF file is compatible with {% data variables.product.prodname For each gzip-compressed SARIF file, SARIF upload supports a maximum size of 10 MB. Any uploads over this limit will be rejected. If your SARIF file is too large because it contains too many results, you should update the configuration to focus on results for the most important rules or queries.{% ifversion code-scanning-tool-status-page %} For more information, see "[AUTOTITLE](/code-security/code-scanning/troubleshooting-sarif-uploads/file-too-large)."{% endif %} -{% data variables.product.prodname_code_scanning_caps %} supports uploading a maximum number of entries for the data objects in the following table. If any of these objects exceeds its maximum value the SARIF file is rejected. For some objects, there is also a additional limit on the number of values that will be displayed. Whenever possible the most important values are shown. To get the most out of your analysis when it includes data above the supported limits, try to optimize the analysis configuration (for example, for the {% data variables.product.prodname_codeql %} tool, identify and disable the most noisy queries).{% ifversion code-scanning-tool-status-page %} For more information, see "[AUTOTITLE](/code-security/code-scanning/troubleshooting-sarif-uploads/results-exceed-limit)."{% endif %} +{% data variables.product.prodname_code_scanning_caps %} supports uploading a maximum number of entries for the data objects in the following table. If any of these objects exceeds its maximum value the SARIF file is rejected. For some objects, there is also an additional limit on the number of values that will be displayed. Whenever possible the most important values are shown. To get the most out of your analysis when it includes data above the supported limits, try to optimize the analysis configuration (for example, for the {% data variables.product.prodname_codeql %} tool, identify and disable the most noisy queries).{% ifversion code-scanning-tool-status-page %} For more information, see "[AUTOTITLE](/code-security/code-scanning/troubleshooting-sarif-uploads/results-exceed-limit)."{% endif %} {% data reusables.code-scanning.sarif-limits %} diff --git a/content/code-security/dependabot/working-with-dependabot/managing-dependabot-on-self-hosted-runners.md b/content/code-security/dependabot/working-with-dependabot/managing-dependabot-on-self-hosted-runners.md index 81bf931fa4fe..4429fdf8f5b5 100644 --- a/content/code-security/dependabot/working-with-dependabot/managing-dependabot-on-self-hosted-runners.md +++ b/content/code-security/dependabot/working-with-dependabot/managing-dependabot-on-self-hosted-runners.md @@ -83,7 +83,7 @@ You can manage {% data variables.product.prodname_dependabot %} on self-hosted r {% data reusables.repositories.sidebar-settings %} {% data reusables.repositories.navigate-to-code-security-and-analysis %} {% ifversion security-configurations %} - {% data reusables.security-configurations.changed-org-settings-security-configurations-callout %} For next steps on enabling {% data variables.product.prodname_dependabot %} on on self-hosted runners and other security features at scale with {% data variables.product.prodname_security_configurations %}, see "[AUTOTITLE](/code-security/securing-your-organization/enabling-security-features-in-your-organization/applying-the-github-recommended-security-configuration-in-your-organization)." + {% data reusables.security-configurations.changed-org-settings-security-configurations-callout %} For next steps on enabling {% data variables.product.prodname_dependabot %} on self-hosted runners and other security features at scale with {% data variables.product.prodname_security_configurations %}, see "[AUTOTITLE](/code-security/securing-your-organization/enabling-security-features-in-your-organization/applying-the-github-recommended-security-configuration-in-your-organization)." {% endif %} 1. Under "Code security and analysis", to the right of "{% data variables.product.prodname_dependabot %} on self-hosted runners", click **Enable** to enable the feature or **Disable** to disable it. @@ -95,7 +95,7 @@ You can use the organization settings page for "Code security and analysis" to e {% data reusables.profile.org_settings %} {% data reusables.organizations.security-and-analysis %} {% ifversion security-configurations %} - {% data reusables.security-configurations.changed-org-settings-security-configurations-callout %} For next steps on enabling {% data variables.product.prodname_dependabot %} on on self-hosted runners and other security features at scale with {% data variables.product.prodname_security_configurations %}, see "[AUTOTITLE](/code-security/securing-your-organization/enabling-security-features-in-your-organization/applying-the-github-recommended-security-configuration-in-your-organization)." + {% data reusables.security-configurations.changed-org-settings-security-configurations-callout %} For next steps on enabling {% data variables.product.prodname_dependabot %} on self-hosted runners and other security features at scale with {% data variables.product.prodname_security_configurations %}, see "[AUTOTITLE](/code-security/securing-your-organization/enabling-security-features-in-your-organization/applying-the-github-recommended-security-configuration-in-your-organization)." {% endif %} 1. Under "Code security and analysis", to the right of "{% data variables.product.prodname_dependabot %} on self-hosted runners", click **Enable all** to enable the feature or **Disable all** to disable it. 1. Optionally, select **Automatically enable for new repositories** to enable {% data variables.product.prodname_dependabot %} on self-hosted runners by default for your organization's new repositories. diff --git a/content/organizations/keeping-your-organization-secure/managing-security-settings-for-your-organization/managing-security-and-analysis-settings-for-your-organization.md b/content/organizations/keeping-your-organization-secure/managing-security-settings-for-your-organization/managing-security-and-analysis-settings-for-your-organization.md index 28931bc4b115..52870493b027 100644 --- a/content/organizations/keeping-your-organization-secure/managing-security-settings-for-your-organization/managing-security-and-analysis-settings-for-your-organization.md +++ b/content/organizations/keeping-your-organization-secure/managing-security-settings-for-your-organization/managing-security-and-analysis-settings-for-your-organization.md @@ -142,7 +142,7 @@ To allow {% data variables.product.prodname_dependabot %} to access a private{% ![Screenshot of the dropdown that you can use to search for repositories. As you type, repositories whose name matches your search criteria will appear in the list. The search text field is highlighted with a dark orange outline.](/assets/images/help/organizations/dependabot-private-repo-choose.png) 1. Start typing the name of the repository you want to grant {% data variables.product.prodname_dependabot %} access to. -1. A list of matching repositories in the organization is displayed, click the repository you want to to allow access to and this adds the repository to the allowed list. +1. A list of matching repositories in the organization is displayed, click the repository you want to allow access to and this adds the repository to the allowed list. 1. Optionally, to remove a repository from the list, to the right of the repository, click {% octicon "x" aria-label="The X icon" %}. {% ifversion secret-scanning-validity-check-partner-patterns %} diff --git a/data/reusables/actions/creating-a-runner-group-for-an-organization.md b/data/reusables/actions/creating-a-runner-group-for-an-organization.md index 46d5d904f695..368c819b1854 100644 --- a/data/reusables/actions/creating-a-runner-group-for-an-organization.md +++ b/data/reusables/actions/creating-a-runner-group-for-an-organization.md @@ -13,7 +13,7 @@ Always include a security admonition above this procedure. This is either one of {% endnote %} -All organizations have a single default runner group. {% ifversion fpt %}Organization owners using the {% data variables.product.prodname_team %} plan{% else %}Organization owners{% ifversion custom-org-roles %} and users with the the "Manage organization runners and runner groups" permission{% endif %}{% endif %} can create additional organization-level runner groups. {% ifversion custom-org-roles %}For more information about custom organization roles, see "[AUTOTITLE](/organizations/managing-peoples-access-to-your-organization-with-roles/about-custom-organization-roles)."{% endif %} +All organizations have a single default runner group. {% ifversion fpt %}Organization owners using the {% data variables.product.prodname_team %} plan{% else %}Organization owners{% ifversion custom-org-roles %} and users with the "Manage organization runners and runner groups" permission{% endif %}{% endif %} can create additional organization-level runner groups. {% ifversion custom-org-roles %}For more information about custom organization roles, see "[AUTOTITLE](/organizations/managing-peoples-access-to-your-organization-with-roles/about-custom-organization-roles)."{% endif %} If no group is specified during the registration process, runners are automatically added to the default group. You can later move the runner from the default group to a custom group. For more information, see "[Moving a runner to a group](#moving-a-runner-to-a-group)."