-
Notifications
You must be signed in to change notification settings - Fork 90
/
my_machine.h
182 lines (167 loc) · 11.1 KB
/
my_machine.h
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
/*
my_machine.h - configuration for STM32F4xx ARM processors
Part of grblHAL
Copyright (c) 2020-2024 Terje Io
grblHAL is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
grblHAL is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with grblHAL. If not, see <http://www.gnu.org/licenses/>.
*/
// NOTE: Only one board may be enabled!
// If none is enabled pin mappings from generic_map.h will be used.
//#define BOARD_CNC3040
//#define BOARD_PROTONEER_3XX // For use with Nucleo-F411RE and F446RE boards.
//#define BOARD_GENERIC_UNO // For use with Nucleo-F411RE and F446RE boards.
//#define BOARD_CNC_BOOSTERPACK
//#define BOARD_MORPHO_CNC // For use with Nucleo-F411RE and F446RE boards. Work in progress.
//#define BOARD_MORPHO_DAC_CNC // For use with F446RE boards and a 32-bit I2S stereo DAC for X and Y output. **EXPERIMENTAL**
//#define BOARD_BLACKPILL // For use with F411 BlackPill, with optional auto square support for one axis
//#define BOARD_BLACKPILL_ALT2 // For use with F411 BlackPill, with optional auto square support for one axis, I2C and spindle sync
//#define BOARD_DEVTRONIC_CNC // For use with Devtronic CNC Controller (F411 BlackPill), with I2C and spindle sync
//#define BOARD_DEVTRONIC_CNC_V2 // For use with Devtronic CNC Controller V2 (F411 BlackPill), with I2C and spindle sync
//#define BOARD_MINI_BLACKPILL // For use with F411 BlackPill, https://github.com/avizienis/Minimal-Black-Pill--STM32F4xx-BOB-for-grblHAL
//#define BOARD_BTT_SKR_PRO_1_1 // F407 based 3D Printer board
//#define BOARD_BTT_SKR_PRO_1_2 // F407 based 3D Printer board
//#define BOARD_BTT_SKR_20 // F407 based 3D Printer board
//#define BOARD_BTT_SKR_20_DAC // F407 based 3D Printer board, uses analog output (DAC) for spindle speed control
//#define BOARD_STM32F407VET6_DEV // F407 based industrial control board
//#define BOARD_FYSETC_S6 // F446 based 3D Printer board
//#define BOARD_FLEXI_HAL // F446 CNC board
//#define BOARD_LONGBOARD32 // F412 Sienci SLB
//#define BOARD_STM32F401_UNI // F401 CNC board
//#define BOARD_MKS_ROBIN_NANO_30 // F407 based 3D Printer board - untested!
//#define BOARD_MKS_EAGLE // F407 based 3D Printer board
//#define BOARD_MY_MACHINE // Add my_machine_map.h before enabling this!
// WARNING: BOARD_BTT_SKR_20 may fry your Trinamic drivers due to bad hardware design.
// The risk goes away if Q1 (HY1904C2) is shorted between source (S) and drain (D).
// See this issue for details: https://github.com/bigtreetech/SKR-2/issues/63
// Note: grblHAL does not check for reversed drivers.
#if defined(NUCLEO_F401) || defined(NUCLEO_F411) || defined(NUCLEO_F446)
#define IS_NUCLEO_DEVKIT 64
#elif defined(NUCLEO144_F446)
#define IS_NUCLEO_DEVKIT 144
#else
#define IS_NUCLEO_DEVKIT 0
#endif
// Configuration
// Uncomment to enable.
#if IS_NUCLEO_DEVKIT != 64 && !defined(USB_SERIAL_CDC) // The Nucleo boards has an off-chip UART to USB interface.
#define USB_SERIAL_CDC 1 // Serial communication via native USB.
#endif
//#define BLUETOOTH_ENABLE 2 // Set to 2 for HC-05 module. Requires and claims one auxiliary input pin.
// Spindle selection:
// Up to four specific spindle drivers can be instantiated at a time
// depending on N_SPINDLE and N_SYS_SPINDLE definitions in grbl/config.h.
// If none are specified the default PWM spindle is instantiated.
// Spindle definitions can be found in grbl/spindle_control.h.
// More here https://github.com/grblHAL/Plugins_spindle
//#define SPINDLE0_ENABLE SPINDLE_ALL
//#define SPINDLE0_ENABLE SPINDLE_PWM0_NODIR
//#define SPINDLE2_ENABLE SPINDLE_NONE
//#define SPINDLE3_ENABLE SPINDLE_NONE
//#define SPINDLE_OFFSET 1 // Uncomment to enable settings for laser spindle XY-offset.
// **********************
//#define MODBUS_ENABLE 1 // Set to 1 for auto direction, 2 for direction signal on auxiliary output pin.
//#define _WIZCHIP_ 5500 // Enables ethernet via WIZnet breakout connected via SPI. Set to 5500 for W5500 chip, 5105 for W5100S.
//#define WEBUI_ENABLE 3 // Enable ESP3D-WEBUI plugin along with networking and SD card plugins.
// NOTE: Only fully compatible with F412 and F429 MCUs.
//#define WEBUI_AUTH_ENABLE 1 // Enable ESP3D-WEBUI authentication.
//#define SDCARD_ENABLE 1 // Run gcode programs from SD card. Set to 2 to enable YModem upload.
//#define MPG_ENABLE 1 // Enable MPG interface. Requires a serial stream and means to switch between normal and MPG mode.
// 1: Mode switching is by handshake pin.
// 2: Mode switching is by the CMD_MPG_MODE_TOGGLE (0x8B) command character.
//#define KEYPAD_ENABLE 1 // 1: uses a I2C keypad for input.
// 2: uses a serial stream for input. If MPG_ENABLE is set > 0 the serial stream is shared with the MPG.
//#define DISPLAY_ENABLE 1 // Set to 1 for I2C display protocol, 2 for I2C LED protocol.
//#define MACROS_ENABLE 1 // Macros plugin. For macros that can be triggered by keypad plugin or auxiliary inputs.
// Set to 1 for aux input triggers, 2 for keypad triggers or 3 for both.
//#define N_MACROS 1 // Number of macros to enable, max 8. If commented out default is 4 when triggered by aux inputs, 8 otherwise.
//#define ODOMETER_ENABLE 1 // Odometer plugin.
//#define PLASMA_ENABLE 1 // Plasma (THC) plugin. To be completed.
//#define EMBROIDERY_ENABLE 1 // Embroidery plugin. To be completed.
//#define PPI_ENABLE 1 // Laser PPI plugin. To be completed.
//#define LASER_COOLANT_ENABLE 1 // Laser coolant plugin. To be completed.
//#define TRINAMIC_ENABLE 2130 // Trinamic TMC2130 stepper driver support.
//#define TRINAMIC_ENABLE 5160 // Trinamic TMC5160 stepper driver support.
//#define TRINAMIC_ENABLE 2209 // Trinamic TMC2209 stepper driver support.
//#define TRINAMIC_ENABLE 2660 // Trinamic TMC2660 stepper driver support.
//#define TRINAMIC_R_SENSE 110 // R sense resistance in milliohms, 2130 and 2209 default is 110, 5160 is 75.
//#define TRINAMIC_I2C 1 // Trinamic I2C - SPI bridge interface.
//#define TRINAMIC_DEV 1 // Development mode, adds a few M-codes to aid debugging. Do not enable in production code.
//#define FANS_ENABLE 1 // Enable fan control via M106/M107. Enables fans plugin.
//#define EEPROM_ENABLE 16 // I2C EEPROM/FRAM support. Set to 16 for 2K, 32 for 4K, 64 for 8K, 128 for 16K and 256 for 32K capacity.
//#define EEPROM_IS_FRAM 1 // Uncomment when EEPROM is enabled and chip is FRAM, this to remove write delay.
//#define SPINDLE_SYNC_ENABLE 1 // Enable spindle sync support (G33, G76). !! NOTE: Alpha quality - enable only for test or verification.
// Currently available for BOARD_PROTONEER_3XX, BOARD_BLACKPILL*, BOARD_MORPHO_CNC and BOARD_STM32F401_UNI.
//#define ESTOP_ENABLE 0 // When enabled only real-time report requests will be executed when the reset pin is asserted.
// Note: if left commented out the default setting is determined from COMPATIBILITY_LEVEL.
//#define MCP3221_ENABLE 0x4D // Enable MCP3221 I2C ADC input with address 0x4D (0b01001101).
//#define RGB_LED_ENABLE 2 // Set to 1 to enable strip length settings $536 and $537, set to 2 to also enable M150 LED strip control.
//#define PWM_SERVO_ENABLE 1 // Enable M280 PWM servo support, requires at least one PWM capable auxiliary output.
//#define BLTOUCH_ENABLE 1 // Enable M401/M402 BLTouch support. Requires and claims one auxiliary PWM servo output.
//#define EVENTOUT_ENABLE 1 // Enable binding events (triggers) to control auxiliary outputs.
//#define ESP_AT_ENABLE 1 // Enable support for Telnet communication via UART connected ESP32 running ESP-AT.
//#define FEED_OVERRIDE_ENABLE 1 // Enable M200 feed override control.
//#define HOMING_PULLOFF_ENABLE 1 // Enable per axis homing pulloff distance settings.
// Optional control signals:
// These will be assigned to aux input pins. Use the $pins command to check which pins are assigned.
// NOTE: If not enough pins are available assignment will silently fail.
//#define PROBE_ENABLE 0 // Default enabled, remove comment to disable probe input.
//#define SAFETY_DOOR_ENABLE 1
//#define MOTOR_FAULT_ENABLE 1
//#define MOTOR_WARNING_ENABLE 1
//#define PROBE_DISCONNECT_ENABLE 1
//#define STOP_DISABLE_ENABLE 1
//#define BLOCK_DELETE_ENABLE 1
//#define SINGLE_BLOCK_ENABLE 1
//#define LIMITS_OVERRIDE_ENABLE 1
/**/
// If the selected board map supports more than three motors ganging and/or auto-squaring
// of axes can be enabled here.
//#define X_GANGED 1
//#define X_AUTO_SQUARE 1
//#define Y_GANGED 1
//#define Y_AUTO_SQUARE 1
//#define Z_GANGED 1
//#define Z_AUTO_SQUARE 1
// For ganged axes the limit switch input (if available) can be configured to act as a max travel limit switch.
// NOTE: If board map already has max limit inputs defined this configuration will be ignored.
//#define X_GANGED_LIM_MAX 1
//#define Y_GANGED_LIM_MAX 1
//#define Z_GANGED_LIM_MAX 1
//
#ifdef _WIZCHIP_
#define ETHERNET_ENABLE 1
#endif
#if ETHERNET_ENABLE || WEBUI_ENABLE
#define TELNET_ENABLE 1 // Telnet daemon - requires Ethernet streaming enabled.
#define WEBSOCKET_ENABLE 1 // Websocket daemon - requires Ethernet streaming enabled.
//#define MDNS_ENABLE 1 // mDNS daemon.
//#define SSDP_ENABLE 1 // SSDP daemon - requires HTTP enabled.
//#define MQTT_ENABLE 1 // MQTT client API, only enable if needed by plugin code.
#if SDCARD_ENABLE || WEBUI_ENABLE
//#define FTP_ENABLE 1 // Ftp daemon - requires SD card enabled.
//#define HTTP_ENABLE 1 // http daemon - requires SD card enabled.
//#define WEBDAV_ENABLE 1 // webdav protocol - requires http daemon and SD card enabled.
#endif
// The following symbols have the default values as shown, uncomment and change as needed.
//#define NETWORK_HOSTNAME "grblHAL"
//#define NETWORK_IPMODE 1 // 0 = static, 1 = DHCP, 2 = AutoIP
//#define NETWORK_IP "192.168.5.1"
//#define NETWORK_GATEWAY "192.168.5.1"
//#define NETWORK_MASK "255.255.255.0"
//#define NETWORK_FTP_PORT 21
//#define NETWORK_TELNET_PORT 23
//#define NETWORK_HTTP_PORT 80
#if HTTP_ENABLE
//#define NETWORK_WEBSOCKET_PORT 81
#else
//#define NETWORK_WEBSOCKET_PORT 80
#endif
#endif