Installed perfectly and worked at the time... But now HA doesnt update the dashboard

[Judge-Tread]

Installed and all worked perfectly at the time - HA dashboard reflected what was being shown on the Bambu Slicer while printing.

However its now not updating HA, and the only thing that has happened is I have powered off the printer (using the switch on the back) as it's standby consumption is very high (due to keeping nozzle/bed at a set temperature for quicker startup when printing).

Does powering off change the Access code? or could it merely have just been allocated a new IP from the router?

[simoniddqd]

Have the same problem, although I havent turned off the printer

[greghesp]

Could you let us know if this is stil an issue please?

[Judge-Tread]

Still no joy getting this to update Sent from my iPhoneOn 27 Sep 2023, at 00:58, Greg Hesp ***@***.***> wrote: Could you let us know if this is stil an issue please? —Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you authored the thread.Message ID: ***@***.***>

[AdrianGarside]

Have you upgraded the integration to the latest version? There's been many bug fixes since June that improve mqtt connection reliability.

But if you're running a P1P/S, be aware of this firmware issue:
#174

[Judge-Tread]

Ooh I am not - I shall retract my grumbles and go do some updates!Sent from my iPhoneOn 27 Sep 2023, at 17:45, AdrianGarside ***@***.***> wrote: Have you upgraded the integration to the latest version? There's been many bug fixes since June that improve mqtt connection reliability. But if you're running a P1P/S, be aware of this firmware issue: #174 —Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you authored the thread.Message ID: ***@***.***>

[greghesp]

Closing. If it's still a problem after updating, please can you open an issue