Wyze Cam V3 rebooting every 5-10 minutes

[HeyItsDaddy]

I redid all 6 of my cameras yesterday, made them virtually identical with the exception of their names have a 1 through 6 in them. My first camera, though, is rebooting every couple of minutes (not at an exact interval, it's random, but short). I've looked through every log I can think of, pulled the SD card and run diagnostics on it, switched out the power supply with a different one, etc. I'm at a loss of what to try next.

Is there any way to see any type of event logging or try to track down what was happening when it is rebooting? All of the Linux commands/procedures I've looked up don't work, of course, because of the scaled down nature of the OS/firmware. Any other thoughts or ideas would be greatly appreciated.

[HeyItsDaddy]

Re-flashed firmware, and formatted SD card and copied fresh wz_mini_hacks. Under 10 minutes later...reboot. :-|
Unpackaged a new 32GB SD card and used it instead...7 minutes later, reboot. sigh
The other 5 cameras aren't having this issue.

[HeyItsDaddy]

OK, I was wrong...it IS happening on my other cameras, too. Going to try flipping the DISABLE_FW_UPGRADE back to false for an evening and see if it resolves. If so, then there must be some kind of check or what not going on that we haven't accounted for. I'll let you know tomorrow if that resolves it.

[HeyItsDaddy]

Checked, and that did fix the issue...so the workaround to spoof the FW version is making the cameras crash constantly. Ideas, @gtxaspec ?

[dudududodododedede]

Yep I'm also seeing this issue on my V3 cams on the old firmware 4.36.9.139

[tismofied]

Same here. I reverted the DISABLE_FW_UPGRADE to false and no issues. As a matter of fact, It also breaks the poe aspect since my UCTRONICS never adopts an ip with the firmware disable variable set to true.