HydraFW DAC guide

#HydraFW DAC (Digital to Analog Converter)

Output: 0 to 3.3V
Resolution: 12bits
Speed: up to 1MSPS

This guide is updated towards firmware release HydraFW v0.5 Beta: HydraFW (HydraBus) v0.5-beta-0-gc0bc1f0 2015-02-11

##DAC configuration syntax description:

• Usage: dac <dac1/dac2> <raw (0 to 4095)/volt (0 to 3.3V)/triangle/noise> [exit]
• DAC1 is mapped on PA4 pin (used by ULED)
• DAC2 is mapped on PA5 pin

Syntax:

• dac1 or dac2 to choose DAC1 or DAC2 device

• Choose one of the following output type:

  • raw Raw value <0 to 4095>

    • Output real value in decimal and volt

  • volt Volt <0 to 3.3v>

    • Output real value in decimal and volt

  • triangle Triangle output (5Hz and amplitude 3.3V)

  • noise Noise output (amplitude 3.3V)

• exit Exit DAC mode (reinit DAC1&2 pins to safe mode/in)

###DAC example:

> dac dac1 raw 1
DAC1 Raw
1/0.0008V

> dac dac2 raw 4095
DAC2 Raw
4095/3.3000V

> dac dac2 volt 1.256
DAC2 Volt
1558/1.2555V

> dac dac2 triangle
DAC2 (Triangle Out)

> dac dac2 noise
DAC2 (Noise Out)