Skip to content
This repository has been archived by the owner on Apr 6, 2023. It is now read-only.

Latest commit

 

History

History
275 lines (199 loc) · 9.61 KB

readme_en.md

File metadata and controls

275 lines (199 loc) · 9.61 KB
Raw

Server-side C++ Inference

This chapter introduces the C++ deployment steps of the PaddleOCR model. The corresponding Python predictive deployment method refers to document. C++ is better than python in terms of performance. Therefore, in CPU and GPU deployment scenarios, C++ deployment is mostly used. This section will introduce how to configure the C++ environment and deploy PaddleOCR in Linux (CPU\GPU) environment. For Windows deployment please refer to Windows compilation guidelines.

1. Prepare the Environment

Environment

  • Linux, docker is recommended.

1.1 Compile OpenCV

  • First of all, you need to download the source code compiled package in the Linux environment from the OpenCV official website. Taking OpenCV 3.4.7 as an example, the download command is as follows.
cd deploy/cpp_infer
wget https://paddleocr.bj.bcebos.com/libs/opencv/opencv-3.4.7.tar.gz
tar -xf opencv-3.4.7.tar.gz

Finally, you will see the folder of opencv-3.4.7/ in the current directory.

  • Compile OpenCV, the OpenCV source path (root_path) and installation path (install_path) should be set by yourself. Enter the OpenCV source code path and compile it in the following way.
root_path=your_opencv_root_path
install_path=${root_path}/opencv3

rm -rf build
mkdir build
cd build

cmake .. \
    -DCMAKE_INSTALL_PREFIX=${install_path} \
    -DCMAKE_BUILD_TYPE=Release \
    -DBUILD_SHARED_LIBS=OFF \
    -DWITH_IPP=OFF \
    -DBUILD_IPP_IW=OFF \
    -DWITH_LAPACK=OFF \
    -DWITH_EIGEN=OFF \
    -DCMAKE_INSTALL_LIBDIR=lib64 \
    -DWITH_ZLIB=ON \
    -DBUILD_ZLIB=ON \
    -DWITH_JPEG=ON \
    -DBUILD_JPEG=ON \
    -DWITH_PNG=ON \
    -DBUILD_PNG=ON \
    -DWITH_TIFF=ON \
    -DBUILD_TIFF=ON

make -j
make install

In the above commands, root_path is the downloaded OpenCV source code path, and install_path is the installation path of OpenCV. After make install is completed, the OpenCV header file and library file will be generated in this folder for later OCR source code compilation.

The final file structure under the OpenCV installation path is as follows.

opencv3/
|-- bin
|-- include
|-- lib
|-- lib64
|-- share

1.2 Compile or Download or the Paddle Inference Library

  • There are 2 ways to obtain the Paddle inference library, described in detail below.

1.2.1 Direct download and installation

Paddle inference library official website. You can review and select the appropriate version of the inference library on the official website.

  • After downloading, use the following command to extract files.
tar -xf paddle_inference.tgz

Finally you will see the the folder of paddle_inference/ in the current path.

1.2.2 Compile the inference source code

git clone https://github.com/PaddlePaddle/Paddle.git
git checkout release/2.2
  • Enter the Paddle directory and run the following commands to compile the paddle inference library.
rm -rf build
mkdir build
cd build

cmake  .. \
    -DWITH_CONTRIB=OFF \
    -DWITH_MKL=ON \
    -DWITH_MKLDNN=ON  \
    -DWITH_TESTING=OFF \
    -DCMAKE_BUILD_TYPE=Release \
    -DWITH_INFERENCE_API_TEST=OFF \
    -DON_INFER=ON \
    -DWITH_PYTHON=ON
make -j
make inference_lib_dist

For more compilation parameter options, please refer to the document.

  • After the compilation process, you can see the following files in the folder of build/paddle_inference_install_dir/.
build/paddle_inference_install_dir/
|-- CMakeCache.txt
|-- paddle
|-- third_party
|-- version.txt

paddle is the Paddle library required for C++ prediction later, and version.txt contains the version information of the current inference library.

2. Compile and Run the Demo

2.1 Export the inference model

  • You can refer to Model inference and export the inference model. After the model is exported, assuming it is placed in the inference directory, the directory structure is as follows.
inference/
|-- det_db
|   |--inference.pdiparams
|   |--inference.pdmodel
|-- rec_rcnn
|   |--inference.pdiparams
|   |--inference.pdmodel

2.2 Compile PaddleOCR C++ inference demo

  • The compilation commands are as follows. The addresses of Paddle C++ inference library, opencv and other Dependencies need to be replaced with the actual addresses on your own machines.
sh tools/build.sh

Specifically, you should modify the paths in tools/build.sh. The related content is as follows.

OPENCV_DIR=your_opencv_dir
LIB_DIR=your_paddle_inference_dir
CUDA_LIB_DIR=your_cuda_lib_dir
CUDNN_LIB_DIR=your_cudnn_lib_dir

OPENCV_DIR is the OpenCV installation path; LIB_DIR is the download (paddle_inference folder) or the generated Paddle inference library path (build/paddle_inference_install_dir folder); CUDA_LIB_DIR is the CUDA library file path, in docker; it is /usr/local/cuda/lib64; CUDNN_LIB_DIR is the cuDNN library file path, in docker it is /usr/lib/x86_64-linux-gnu/.

  • After the compilation is completed, an executable file named ppocr will be generated in the build folder.

Run the demo

Execute the built executable file:

./build/ppocr <mode> [--param1] [--param2] [...]

mode is a required parameter，and the valid values are

mode value Model used
det Detection only
rec Recognition only
system End-to-end system

Specifically,

1. run det demo:
./build/ppocr det \
    --det_model_dir=inference/ch_ppocr_mobile_v2.0_det_infer \
    --image_dir=../../doc/imgs/12.jpg
2. run rec demo:
./build/ppocr rec \
    --rec_model_dir=inference/ch_ppocr_mobile_v2.0_rec_infer \
    --image_dir=../../doc/imgs_words/ch/
3. run system demo:
# without text direction classifier
./build/ppocr system \
    --det_model_dir=inference/ch_ppocr_mobile_v2.0_det_infer \
    --rec_model_dir=inference/ch_ppocr_mobile_v2.0_rec_infer \
    --image_dir=../../doc/imgs/12.jpg
# with text direction classifier
./build/ppocr system \
    --det_model_dir=inference/ch_ppocr_mobile_v2.0_det_infer \
    --use_angle_cls=true \
    --cls_model_dir=inference/ch_ppocr_mobile_v2.0_cls_infer \
    --rec_model_dir=inference/ch_ppocr_mobile_v2.0_rec_infer \
    --image_dir=../../doc/imgs/12.jpg

More parameters are as follows,

  • Common parameters
parameter data type default meaning
use_gpu bool false Whether to use GPU
gpu_id int 0 GPU id when use_gpu is true
gpu_mem int 4000 GPU memory requested
cpu_math_library_num_threads int 10 Number of threads when using CPU inference. When machine cores is enough, the large the value, the faster the inference speed
use_mkldnn bool true Whether to use mkdlnn library
  • Detection related parameters
parameter data type default meaning
det_model_dir string - Address of detection inference model
max_side_len int 960 Limit the maximum image height and width to 960
det_db_thresh float 0.3 Used to filter the binarized image of DB prediction, setting 0.-0.3 has no obvious effect on the result
det_db_box_thresh float 0.5 DB post-processing filter box threshold, if there is a missing box detected, it can be reduced as appropriate
det_db_unclip_ratio float 1.6 Indicates the compactness of the text box, the smaller the value, the closer the text box to the text
use_polygon_score bool false Whether to use polygon box to calculate bbox score, false means to use rectangle box to calculate. Use rectangular box to calculate faster, and polygonal box more accurate for curved text area.
visualize bool true Whether to visualize the results，when it is set as true, The prediction result will be save in the image file ./ocr_vis.png.
  • Classifier related parameters
parameter data type default meaning
use_angle_cls bool false Whether to use the direction classifier
cls_model_dir string - Address of direction classifier inference model
cls_thresh float 0.9 Score threshold of the direction classifier
  • Recognition related parameters
parameter data type default meaning
rec_model_dir string - Address of recognition inference model
char_list_file string ../../ppocr/utils/ppocr_keys_v1.txt dictionary file
  • Multi-language inference is also supported in PaddleOCR, you can refer to recognition tutorial for more supported languages and models in PaddleOCR. Specifically, if you want to infer using multi-language models, you just need to modify values of char_list_file and rec_model_dir.

The detection results will be shown on the screen, which is as follows.

2.3 Notes

  • Paddle 2.0.0 inference model library is recommended for this tutorial.