tbw.sh

#!/bin/bash
#This script will most probably return your ssd TBW. 
#It is taken from this blog here - http://www.jdgleaver.co.uk/blog/2014/05/23/samsung_ssds_reading_total_bytes_written_under_linux.html


#######################################
# Variables                           #
#######################################

SSD_DEVICE="/dev/sda"

ON_TIME_TAG="Power_On_Hours"
WEAR_COUNT_TAG="Wear_Leveling_Count"
LBAS_WRITTEN_TAG="Total_LBAs_Written"
LBA_SIZE=512 # Value in bytes

BYTES_PER_MB=1048576
BYTES_PER_GB=1073741824
BYTES_PER_TB=1099511627776

#######################################
# Get total data written...           #
#######################################

# Get SMART attributes
SMART_INFO=$(sudo /usr/sbin/smartctl -A "$SSD_DEVICE")

# Extract required attributes
ON_TIME=$(echo "$SMART_INFO" | grep "$ON_TIME_TAG" | awk '{print $10}')
WEAR_COUNT=$(echo "$SMART_INFO" | grep "$WEAR_COUNT_TAG" | awk '{print $4}' | sed 's/^0*//')
LBAS_WRITTEN=$(echo "$SMART_INFO" | grep "$LBAS_WRITTEN_TAG" | awk '{print $10}')

# Convert LBAs -> bytes
BYTES_WRITTEN=$(echo "$LBAS_WRITTEN * $LBA_SIZE" | bc)
MB_WRITTEN=$(echo "scale=3; $BYTES_WRITTEN / $BYTES_PER_MB" | bc)
GB_WRITTEN=$(echo "scale=3; $BYTES_WRITTEN / $BYTES_PER_GB" | bc)
TB_WRITTEN=$(echo "scale=3; $BYTES_WRITTEN / $BYTES_PER_TB" | bc)

# Output results...
echo "------------------------------"
echo " SSD Status:   $SSD_DEVICE"
echo "------------------------------"
echo " On time:      $(echo $ON_TIME | sed ':a;s/\B[0-9]\{3\}\>/,&/;ta') hr"
echo "------------------------------"
echo " Data written:"
echo "           MB: $(echo $MB_WRITTEN | sed ':a;s/\B[0-9]\{3\}\>/,&/;ta')"
echo "           GB: $(echo $GB_WRITTEN | sed ':a;s/\B[0-9]\{3\}\>/,&/;ta')"
echo "           TB: $(echo $TB_WRITTEN | sed ':a;s/\B[0-9]\{3\}\>/,&/;ta')"
echo "------------------------------"
echo " Mean write rate:"
echo "        MB/hr: $(echo "scale=3; $MB_WRITTEN / $ON_TIME" | bc | sed ':a;s/\B[0-9]\{3\}\>/,&/;ta')"
echo "------------------------------"
echo " Drive health: ${WEAR_COUNT} %"
echo "------------------------------"