InnouCrowdsaleReady.sol

// File: installed_contracts/openzeppelin-solidity/contracts/math/SafeMath.sol

pragma solidity ^0.5.2;

/**
 * @title SafeMath
 * @dev Unsigned math operations with safety checks that revert on error
 */
library SafeMath {
    /**
     * @dev Multiplies two unsigned integers, reverts on overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-solidity/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b);

        return c;
    }

    /**
     * @dev Integer division of two unsigned integers truncating the quotient, reverts on division by zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        // Solidity only automatically asserts when dividing by 0
        require(b > 0);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Subtracts two unsigned integers, reverts on overflow (i.e. if subtrahend is greater than minuend).
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Adds two unsigned integers, reverts on overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a);

        return c;
    }

    /**
     * @dev Divides two unsigned integers and returns the remainder (unsigned integer modulo),
     * reverts when dividing by zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b != 0);
        return a % b;
    }
}

// File: installed_contracts/openzeppelin-solidity/contracts/token/ERC20/IERC20.sol

pragma solidity ^0.5.2;

/**
 * @title ERC20 interface
 * @dev see https://eips.ethereum.org/EIPS/eip-20
 */
interface IERC20 {
    function transfer(address to, uint256 value) external returns (bool);

    function approve(address spender, uint256 value) external returns (bool);

    function transferFrom(address from, address to, uint256 value) external returns (bool);

    function totalSupply() external view returns (uint256);

    function balanceOf(address who) external view returns (uint256);

    function allowance(address owner, address spender) external view returns (uint256);

    event Transfer(address indexed from, address indexed to, uint256 value);

    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// File: installed_contracts/openzeppelin-solidity/contracts/utils/Address.sol

pragma solidity ^0.5.2;

/**
 * Utility library of inline functions on addresses
 */
library Address {
    /**
     * Returns whether the target address is a contract
     * @dev This function will return false if invoked during the constructor of a contract,
     * as the code is not actually created until after the constructor finishes.
     * @param account address of the account to check
     * @return whether the target address is a contract
     */
    function isContract(address account) internal view returns (bool) {
        uint256 size;
        // XXX Currently there is no better way to check if there is a contract in an address
        // than to check the size of the code at that address.
        // See https://ethereum.stackexchange.com/a/14016/36603
        // for more details about how this works.
        // TODO Check this again before the Serenity release, because all addresses will be
        // contracts then.
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }
}

// File: installed_contracts/openzeppelin-solidity/contracts/token/ERC20/SafeERC20.sol

pragma solidity ^0.5.2;




/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for ERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using SafeMath for uint256;
    using Address for address;

    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require((value == 0) || (token.allowance(address(this), spender) == 0));
        callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).add(value);
        callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).sub(value);
        callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must equal true).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves.

        // A Solidity high level call has three parts:
        //  1. The target address is checked to verify it contains contract code
        //  2. The call itself is made, and success asserted
        //  3. The return value is decoded, which in turn checks the size of the returned data.

        require(address(token).isContract());

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = address(token).call(data);
        require(success);

        if (returndata.length > 0) { // Return data is optional
            require(abi.decode(returndata, (bool)));
        }
    }
}

// File: installed_contracts/openzeppelin-solidity/contracts/utils/ReentrancyGuard.sol

pragma solidity ^0.5.2;

/**
 * @title Helps contracts guard against reentrancy attacks.
 * @author Remco Bloemen <remco@2π.com>, Eenae <alexey@mixbytes.io>
 * @dev If you mark a function `nonReentrant`, you should also
 * mark it `external`.
 */
contract ReentrancyGuard {
    /// @dev counter to allow mutex lock with only one SSTORE operation
    uint256 private _guardCounter;

    constructor () internal {
        // The counter starts at one to prevent changing it from zero to a non-zero
        // value, which is a more expensive operation.
        _guardCounter = 1;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and make it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        _guardCounter += 1;
        uint256 localCounter = _guardCounter;
        _;
        require(localCounter == _guardCounter);
    }
}

// File: installed_contracts/openzeppelin-solidity/contracts/crowdsale/Crowdsale.sol

pragma solidity ^0.5.2;





/**
 * @title Crowdsale
 * @dev Crowdsale is a base contract for managing a token crowdsale,
 * allowing investors to purchase tokens with ether. This contract implements
 * such functionality in its most fundamental form and can be extended to provide additional
 * functionality and/or custom behavior.
 * The external interface represents the basic interface for purchasing tokens, and conforms
 * the base architecture for crowdsales. It is *not* intended to be modified / overridden.
 * The internal interface conforms the extensible and modifiable surface of crowdsales. Override
 * the methods to add functionality. Consider using 'super' where appropriate to concatenate
 * behavior.
 */
contract Crowdsale is ReentrancyGuard {
    using SafeMath for uint256;
    using SafeERC20 for IERC20;

    // The token being sold
    IERC20 private _token;

    // Address where funds are collected
    address payable private _wallet;

    // How many token units a buyer gets per wei.
    // The rate is the conversion between wei and the smallest and indivisible token unit.
    // So, if you are using a rate of 1 with a ERC20Detailed token with 3 decimals called TOK
    // 1 wei will give you 1 unit, or 0.001 TOK.
    uint256 private _rate;

    // Amount of wei raised
    uint256 private _weiRaised;

    /**
     * Event for token purchase logging
     * @param purchaser who paid for the tokens
     * @param beneficiary who got the tokens
     * @param value weis paid for purchase
     * @param amount amount of tokens purchased
     */
    event TokensPurchased(address indexed purchaser, address indexed beneficiary, uint256 value, uint256 amount);

    /**
     * @param rate Number of token units a buyer gets per wei
     * @dev The rate is the conversion between wei and the smallest and indivisible
     * token unit. So, if you are using a rate of 1 with a ERC20Detailed token
     * with 3 decimals called TOK, 1 wei will give you 1 unit, or 0.001 TOK.
     * @param wallet Address where collected funds will be forwarded to
     * @param token Address of the token being sold
     */
    constructor (uint256 rate, address payable wallet, IERC20 token) public {
        require(rate > 0);
        require(wallet != address(0));
        require(address(token) != address(0));

        _rate = rate;
        _wallet = wallet;
        _token = token;
    }

    /**
     * @dev fallback function ***DO NOT OVERRIDE***
     * Note that other contracts will transfer funds with a base gas stipend
     * of 2300, which is not enough to call buyTokens. Consider calling
     * buyTokens directly when purchasing tokens from a contract.
     */
    function () external payable {
        buyTokens(msg.sender);
    }

    /**
     * @return the token being sold.
     */
    function token() public view returns (IERC20) {
        return _token;
    }

    /**
     * @return the address where funds are collected.
     */
    function wallet() public view returns (address payable) {
        return _wallet;
    }

    /**
     * @return the number of token units a buyer gets per wei.
     */
    function rate() public view returns (uint256) {
        return _rate;
    }

    /**
     * @return the amount of wei raised.
     */
    function weiRaised() public view returns (uint256) {
        return _weiRaised;
    }

    /**
     * @dev low level token purchase ***DO NOT OVERRIDE***
     * This function has a non-reentrancy guard, so it shouldn't be called by
     * another `nonReentrant` function.
     * @param beneficiary Recipient of the token purchase
     */
    function buyTokens(address beneficiary) public nonReentrant payable {
        uint256 weiAmount = msg.value;
        _preValidatePurchase(beneficiary, weiAmount);

        // calculate token amount to be created
        uint256 tokens = _getTokenAmount(weiAmount);

        // update state
        _weiRaised = _weiRaised.add(weiAmount);

        _processPurchase(beneficiary, tokens);
        emit TokensPurchased(msg.sender, beneficiary, weiAmount, tokens);

        _updatePurchasingState(beneficiary, weiAmount);

        _forwardFunds();
        _postValidatePurchase(beneficiary, weiAmount);
    }

    /**
     * @dev Validation of an incoming purchase. Use require statements to revert state when conditions are not met.
     * Use `super` in contracts that inherit from Crowdsale to extend their validations.
     * Example from CappedCrowdsale.sol's _preValidatePurchase method:
     *     super._preValidatePurchase(beneficiary, weiAmount);
     *     require(weiRaised().add(weiAmount) <= cap);
     * @param beneficiary Address performing the token purchase
     * @param weiAmount Value in wei involved in the purchase
     */
    function _preValidatePurchase(address beneficiary, uint256 weiAmount) internal view {
        require(beneficiary != address(0));
        require(weiAmount != 0);
    }

    /**
     * @dev Validation of an executed purchase. Observe state and use revert statements to undo rollback when valid
     * conditions are not met.
     * @param beneficiary Address performing the token purchase
     * @param weiAmount Value in wei involved in the purchase
     */
    function _postValidatePurchase(address beneficiary, uint256 weiAmount) internal view {
        // solhint-disable-previous-line no-empty-blocks
    }

    /**
     * @dev Source of tokens. Override this method to modify the way in which the crowdsale ultimately gets and sends
     * its tokens.
     * @param beneficiary Address performing the token purchase
     * @param tokenAmount Number of tokens to be emitted
     */
    function _deliverTokens(address beneficiary, uint256 tokenAmount) internal {
        _token.safeTransfer(beneficiary, tokenAmount);
    }

    /**
     * @dev Executed when a purchase has been validated and is ready to be executed. Doesn't necessarily emit/send
     * tokens.
     * @param beneficiary Address receiving the tokens
     * @param tokenAmount Number of tokens to be purchased
     */
    function _processPurchase(address beneficiary, uint256 tokenAmount) internal {
        _deliverTokens(beneficiary, tokenAmount);
    }

    /**
     * @dev Override for extensions that require an internal state to check for validity (current user contributions,
     * etc.)
     * @param beneficiary Address receiving the tokens
     * @param weiAmount Value in wei involved in the purchase
     */
    function _updatePurchasingState(address beneficiary, uint256 weiAmount) internal {
        // solhint-disable-previous-line no-empty-blocks
    }

    /**
     * @dev Override to extend the way in which ether is converted to tokens.
     * @param weiAmount Value in wei to be converted into tokens
     * @return Number of tokens that can be purchased with the specified _weiAmount
     */
    function _getTokenAmount(uint256 weiAmount) internal view returns (uint256) {
        return weiAmount.mul(_rate);
    }

    /**
     * @dev Determines how ETH is stored/forwarded on purchases.
     */
    function _forwardFunds() internal {
        _wallet.transfer(msg.value);
    }
}

// File: installed_contracts/openzeppelin-solidity/contracts/crowdsale/validation/TimedCrowdsale.sol

pragma solidity ^0.5.2;



/**
 * @title TimedCrowdsale
 * @dev Crowdsale accepting contributions only within a time frame.
 */
contract TimedCrowdsale is Crowdsale {
    using SafeMath for uint256;

    uint256 private _openingTime;
    uint256 private _closingTime;

    /**
     * Event for crowdsale extending
     * @param newClosingTime new closing time
     * @param prevClosingTime old closing time
     */
    event TimedCrowdsaleExtended(uint256 prevClosingTime, uint256 newClosingTime);

    /**
     * @dev Reverts if not in crowdsale time range.
     */
    modifier onlyWhileOpen {
        require(isOpen());
        _;
    }

    /**
     * @dev Constructor, takes crowdsale opening and closing times.
     * @param openingTime Crowdsale opening time
     * @param closingTime Crowdsale closing time
     */
    constructor (uint256 openingTime, uint256 closingTime) public {
        // solhint-disable-next-line not-rely-on-time
        require(openingTime >= block.timestamp);
        require(closingTime > openingTime);

        _openingTime = openingTime;
        _closingTime = closingTime;
    }

    /**
     * @return the crowdsale opening time.
     */
    function openingTime() public view returns (uint256) {
        return _openingTime;
    }

    /**
     * @return the crowdsale closing time.
     */
    function closingTime() public view returns (uint256) {
        return _closingTime;
    }

    /**
     * @return true if the crowdsale is open, false otherwise.
     */
    function isOpen() public view returns (bool) {
        // solhint-disable-next-line not-rely-on-time
        return block.timestamp >= _openingTime && block.timestamp <= _closingTime;
    }

    /**
     * @dev Checks whether the period in which the crowdsale is open has already elapsed.
     * @return Whether crowdsale period has elapsed
     */
    function hasClosed() public view returns (bool) {
        // solhint-disable-next-line not-rely-on-time
        return block.timestamp > _closingTime;
    }

    /**
     * @dev Extend parent behavior requiring to be within contributing period
     * @param beneficiary Token purchaser
     * @param weiAmount Amount of wei contributed
     */
    function _preValidatePurchase(address beneficiary, uint256 weiAmount) internal onlyWhileOpen view {
        super._preValidatePurchase(beneficiary, weiAmount);
    }

    /**
     * @dev Extend crowdsale
     * @param newClosingTime Crowdsale closing time
     */
    function _extendTime(uint256 newClosingTime) internal {
        require(!hasClosed());
        require(newClosingTime > _closingTime);

        emit TimedCrowdsaleExtended(_closingTime, newClosingTime);
        _closingTime = newClosingTime;
    }
}

// File: installed_contracts/openzeppelin-solidity/contracts/crowdsale/distribution/FinalizableCrowdsale.sol

pragma solidity ^0.5.2;



/**
 * @title FinalizableCrowdsale
 * @dev Extension of TimedCrowdsale with a one-off finalization action, where one
 * can do extra work after finishing.
 */
contract FinalizableCrowdsale is TimedCrowdsale {
    using SafeMath for uint256;

    bool private _finalized;

    event CrowdsaleFinalized();

    constructor () internal {
        _finalized = false;
    }

    /**
     * @return true if the crowdsale is finalized, false otherwise.
     */
    function finalized() public view returns (bool) {
        return _finalized;
    }

    /**
     * @dev Must be called after crowdsale ends, to do some extra finalization
     * work. Calls the contract's finalization function.
     */
    function finalize() public {
        require(!_finalized);
        require(hasClosed());

        _finalized = true;

        _finalization();
        emit CrowdsaleFinalized();
    }

    /**
     * @dev Can be overridden to add finalization logic. The overriding function
     * should call super._finalization() to ensure the chain of finalization is
     * executed entirely.
     */
    function _finalization() internal {
        // solhint-disable-previous-line no-empty-blocks
    }
}

// File: installed_contracts/openzeppelin-solidity/contracts/ownership/Secondary.sol

pragma solidity ^0.5.2;

/**
 * @title Secondary
 * @dev A Secondary contract can only be used by its primary account (the one that created it)
 */
contract Secondary {
    address private _primary;

    event PrimaryTransferred(
        address recipient
    );

    /**
     * @dev Sets the primary account to the one that is creating the Secondary contract.
     */
    constructor () internal {
        _primary = msg.sender;
        emit PrimaryTransferred(_primary);
    }

    /**
     * @dev Reverts if called from any account other than the primary.
     */
    modifier onlyPrimary() {
        require(msg.sender == _primary);
        _;
    }

    /**
     * @return the address of the primary.
     */
    function primary() public view returns (address) {
        return _primary;
    }

    /**
     * @dev Transfers contract to a new primary.
     * @param recipient The address of new primary.
     */
    function transferPrimary(address recipient) public onlyPrimary {
        require(recipient != address(0));
        _primary = recipient;
        emit PrimaryTransferred(_primary);
    }
}

// File: installed_contracts/openzeppelin-solidity/contracts/payment/escrow/Escrow.sol

pragma solidity ^0.5.2;



 /**
  * @title Escrow
  * @dev Base escrow contract, holds funds designated for a payee until they
  * withdraw them.
  * @dev Intended usage: This contract (and derived escrow contracts) should be a
  * standalone contract, that only interacts with the contract that instantiated
  * it. That way, it is guaranteed that all Ether will be handled according to
  * the Escrow rules, and there is no need to check for payable functions or
  * transfers in the inheritance tree. The contract that uses the escrow as its
  * payment method should be its primary, and provide public methods redirecting
  * to the escrow's deposit and withdraw.
  */
contract Escrow is Secondary {
    using SafeMath for uint256;

    event Deposited(address indexed payee, uint256 weiAmount);
    event Withdrawn(address indexed payee, uint256 weiAmount);

    mapping(address => uint256) private _deposits;

    function depositsOf(address payee) public view returns (uint256) {
        return _deposits[payee];
    }

    /**
     * @dev Stores the sent amount as credit to be withdrawn.
     * @param payee The destination address of the funds.
     */
    function deposit(address payee) public onlyPrimary payable {
        uint256 amount = msg.value;
        _deposits[payee] = _deposits[payee].add(amount);

        emit Deposited(payee, amount);
    }

    /**
     * @dev Withdraw accumulated balance for a payee.
     * @param payee The address whose funds will be withdrawn and transferred to.
     */
    function withdraw(address payable payee) public onlyPrimary {
        uint256 payment = _deposits[payee];

        _deposits[payee] = 0;

        payee.transfer(payment);

        emit Withdrawn(payee, payment);
    }
}

// File: installed_contracts/openzeppelin-solidity/contracts/payment/escrow/ConditionalEscrow.sol

pragma solidity ^0.5.2;


/**
 * @title ConditionalEscrow
 * @dev Base abstract escrow to only allow withdrawal if a condition is met.
 * @dev Intended usage: See Escrow.sol. Same usage guidelines apply here.
 */
contract ConditionalEscrow is Escrow {
    /**
     * @dev Returns whether an address is allowed to withdraw their funds. To be
     * implemented by derived contracts.
     * @param payee The destination address of the funds.
     */
    function withdrawalAllowed(address payee) public view returns (bool);

    function withdraw(address payable payee) public {
        require(withdrawalAllowed(payee));
        super.withdraw(payee);
    }
}

// File: installed_contracts/openzeppelin-solidity/contracts/payment/escrow/RefundEscrow.sol

pragma solidity ^0.5.2;


/**
 * @title RefundEscrow
 * @dev Escrow that holds funds for a beneficiary, deposited from multiple
 * parties.
 * @dev Intended usage: See Escrow.sol. Same usage guidelines apply here.
 * @dev The primary account (that is, the contract that instantiates this
 * contract) may deposit, close the deposit period, and allow for either
 * withdrawal by the beneficiary, or refunds to the depositors. All interactions
 * with RefundEscrow will be made through the primary contract. See the
 * RefundableCrowdsale contract for an example of RefundEscrow’s use.
 */
contract RefundEscrow is ConditionalEscrow {
    enum State { Active, Refunding, Closed }

    event RefundsClosed();
    event RefundsEnabled();

    State private _state;
    address payable private _beneficiary;

    /**
     * @dev Constructor.
     * @param beneficiary The beneficiary of the deposits.
     */
    constructor (address payable beneficiary) public {
        require(beneficiary != address(0));
        _beneficiary = beneficiary;
        _state = State.Active;
    }

    /**
     * @return the current state of the escrow.
     */
    function state() public view returns (State) {
        return _state;
    }

    /**
     * @return the beneficiary of the escrow.
     */
    function beneficiary() public view returns (address) {
        return _beneficiary;
    }

    /**
     * @dev Stores funds that may later be refunded.
     * @param refundee The address funds will be sent to if a refund occurs.
     */
    function deposit(address refundee) public payable {
        require(_state == State.Active);
        super.deposit(refundee);
    }

    /**
     * @dev Allows for the beneficiary to withdraw their funds, rejecting
     * further deposits.
     */
    function close() public onlyPrimary {
        require(_state == State.Active);
        _state = State.Closed;
        emit RefundsClosed();
    }

    /**
     * @dev Allows for refunds to take place, rejecting further deposits.
     */
    function enableRefunds() public onlyPrimary {
        require(_state == State.Active);
        _state = State.Refunding;
        emit RefundsEnabled();
    }

    /**
     * @dev Withdraws the beneficiary's funds.
     */
    function beneficiaryWithdraw() public {
        require(_state == State.Closed);
        _beneficiary.transfer(address(this).balance);
    }

    /**
     * @dev Returns whether refundees can withdraw their deposits (be refunded). The overridden function receives a
     * 'payee' argument, but we ignore it here since the condition is global, not per-payee.
     */
    function withdrawalAllowed(address) public view returns (bool) {
        return _state == State.Refunding;
    }
}

// File: installed_contracts/openzeppelin-solidity/contracts/crowdsale/distribution/RefundableCrowdsale.sol

pragma solidity ^0.5.2;




/**
 * @title RefundableCrowdsale
 * @dev Extension of FinalizableCrowdsale contract that adds a funding goal, and the possibility of users
 * getting a refund if goal is not met.
 *
 * Deprecated, use RefundablePostDeliveryCrowdsale instead. Note that if you allow tokens to be traded before the goal
 * is met, then an attack is possible in which the attacker purchases tokens from the crowdsale and when they sees that
 * the goal is unlikely to be met, they sell their tokens (possibly at a discount). The attacker will be refunded when
 * the crowdsale is finalized, and the users that purchased from them will be left with worthless tokens.
 */
contract RefundableCrowdsale is FinalizableCrowdsale {
    using SafeMath for uint256;

    // minimum amount of funds to be raised in weis
    uint256 private _goal;

    // refund escrow used to hold funds while crowdsale is running
    RefundEscrow private _escrow;

    /**
     * @dev Constructor, creates RefundEscrow.
     * @param goal Funding goal
     */
    constructor (uint256 goal) public {
        require(goal > 0);
        _escrow = new RefundEscrow(wallet());
        _goal = goal;
    }

    /**
     * @return minimum amount of funds to be raised in wei.
     */
    function goal() public view returns (uint256) {
        return _goal;
    }

    /**
     * @dev Investors can claim refunds here if crowdsale is unsuccessful
     * @param refundee Whose refund will be claimed.
     */
    function claimRefund(address payable refundee) public {
        require(finalized());
        require(!goalReached());

        _escrow.withdraw(refundee);
    }

    /**
     * @dev Checks whether funding goal was reached.
     * @return Whether funding goal was reached
     */
    function goalReached() public view returns (bool) {
        return weiRaised() >= _goal;
    }

    /**
     * @dev escrow finalization task, called when finalize() is called
     */
    function _finalization() internal {
        if (goalReached()) {
            _escrow.close();
            _escrow.beneficiaryWithdraw();
        } else {
            _escrow.enableRefunds();
        }

        super._finalization();
    }

    /**
     * @dev Overrides Crowdsale fund forwarding, sending funds to escrow.
     */
    function _forwardFunds() internal {
        _escrow.deposit.value(msg.value)(msg.sender);
    }
}

// File: installed_contracts/openzeppelin-solidity/contracts/crowdsale/distribution/PostDeliveryCrowdsale.sol

pragma solidity ^0.5.2;



/**
 * @title PostDeliveryCrowdsale
 * @dev Crowdsale that locks tokens from withdrawal until it ends.
 */
contract PostDeliveryCrowdsale is TimedCrowdsale {
    using SafeMath for uint256;

    mapping(address => uint256) private _balances;

    /**
     * @dev Withdraw tokens only after crowdsale ends.
     * @param beneficiary Whose tokens will be withdrawn.
     */
    function withdrawTokens(address beneficiary) public {
        require(hasClosed());
        uint256 amount = _balances[beneficiary];
        require(amount > 0);
        _balances[beneficiary] = 0;
        _deliverTokens(beneficiary, amount);
    }

    /**
     * @return the balance of an account.
     */
    function balanceOf(address account) public view returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev Overrides parent by storing balances instead of issuing tokens right away.
     * @param beneficiary Token purchaser
     * @param tokenAmount Amount of tokens purchased
     */
    function _processPurchase(address beneficiary, uint256 tokenAmount) internal {
        _balances[beneficiary] = _balances[beneficiary].add(tokenAmount);
    }

}

// File: installed_contracts/openzeppelin-solidity/contracts/crowdsale/distribution/RefundablePostDeliveryCrowdsale.sol

pragma solidity ^0.5.2;




/**
 * @title RefundablePostDeliveryCrowdsale
 * @dev Extension of RefundableCrowdsale contract that only delivers the tokens
 * once the crowdsale has closed and the goal met, preventing refunds to be issued
 * to token holders.
 */
contract RefundablePostDeliveryCrowdsale is RefundableCrowdsale, PostDeliveryCrowdsale {
    function withdrawTokens(address beneficiary) public {
        require(finalized());
        require(goalReached());

        super.withdrawTokens(beneficiary);
    }
}

// File: installed_contracts/openzeppelin-solidity/contracts/token/ERC20/ERC20Detailed.sol

pragma solidity ^0.5.2;


/**
 * @title ERC20Detailed token
 * @dev The decimals are only for visualization purposes.
 * All the operations are done using the smallest and indivisible token unit,
 * just as on Ethereum all the operations are done in wei.
 */
contract ERC20Detailed is IERC20 {
    string private _name;
    string private _symbol;
    uint8 private _decimals;

    constructor (string memory name, string memory symbol, uint8 decimals) public {
        _name = name;
        _symbol = symbol;
        _decimals = decimals;
    }

    /**
     * @return the name of the token.
     */
    function name() public view returns (string memory) {
        return _name;
    }

    /**
     * @return the symbol of the token.
     */
    function symbol() public view returns (string memory) {
        return _symbol;
    }

    /**
     * @return the number of decimals of the token.
     */
    function decimals() public view returns (uint8) {
        return _decimals;
    }
}

// File: installed_contracts/openzeppelin-solidity/contracts/ownership/Ownable.sol

pragma solidity ^0.5.2;

/**
 * @title Ownable
 * @dev The Ownable contract has an owner address, and provides basic authorization control
 * functions, this simplifies the implementation of "user permissions".
 */
contract Ownable {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev The Ownable constructor sets the original `owner` of the contract to the sender
     * account.
     */
    constructor () internal {
        _owner = msg.sender;
        emit OwnershipTransferred(address(0), _owner);
    }

    /**
     * @return the address of the owner.
     */
    function owner() public view returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(isOwner());
        _;
    }

    /**
     * @return true if `msg.sender` is the owner of the contract.
     */
    function isOwner() public view returns (bool) {
        return msg.sender == _owner;
    }

    /**
     * @dev Allows the current owner to relinquish control of the contract.
     * It will not be possible to call the functions with the `onlyOwner`
     * modifier anymore.
     * @notice Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

    /**
     * @dev Allows the current owner to transfer control of the contract to a newOwner.
     * @param newOwner The address to transfer ownership to.
     */
    function transferOwnership(address newOwner) public onlyOwner {
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers control of the contract to a newOwner.
     * @param newOwner The address to transfer ownership to.
     */
    function _transferOwnership(address newOwner) internal {
        require(newOwner != address(0));
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}

// File: installed_contracts/openzeppelin-solidity/contracts/token/ERC20/ERC20.sol

pragma solidity ^0.5.2;



/**
 * @title Standard ERC20 token
 *
 * @dev Implementation of the basic standard token.
 * https://eips.ethereum.org/EIPS/eip-20
 * Originally based on code by FirstBlood:
 * https://github.com/Firstbloodio/token/blob/master/smart_contract/FirstBloodToken.sol
 *
 * This implementation emits additional Approval events, allowing applications to reconstruct the allowance status for
 * all accounts just by listening to said events. Note that this isn't required by the specification, and other
 * compliant implementations may not do it.
 */
contract ERC20 is IERC20 {
    using SafeMath for uint256;

    mapping (address => uint256) private _balances;

    mapping (address => mapping (address => uint256)) private _allowed;

    uint256 private _totalSupply;

    /**
     * @dev Total number of tokens in existence
     */
    function totalSupply() public view returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev Gets the balance of the specified address.
     * @param owner The address to query the balance of.
     * @return A uint256 representing the amount owned by the passed address.
     */
    function balanceOf(address owner) public view returns (uint256) {
        return _balances[owner];
    }

    /**
     * @dev Function to check the amount of tokens that an owner allowed to a spender.
     * @param owner address The address which owns the funds.
     * @param spender address The address which will spend the funds.
     * @return A uint256 specifying the amount of tokens still available for the spender.
     */
    function allowance(address owner, address spender) public view returns (uint256) {
        return _allowed[owner][spender];
    }

    /**
     * @dev Transfer token to a specified address
     * @param to The address to transfer to.
     * @param value The amount to be transferred.
     */
    function transfer(address to, uint256 value) public returns (bool) {
        _transfer(msg.sender, to, value);
        return true;
    }

    /**
     * @dev Approve the passed address to spend the specified amount of tokens on behalf of msg.sender.
     * Beware that changing an allowance with this method brings the risk that someone may use both the old
     * and the new allowance by unfortunate transaction ordering. One possible solution to mitigate this
     * race condition is to first reduce the spender's allowance to 0 and set the desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     * @param spender The address which will spend the funds.
     * @param value The amount of tokens to be spent.
     */
    function approve(address spender, uint256 value) public returns (bool) {
        _approve(msg.sender, spender, value);
        return true;
    }

    /**
     * @dev Transfer tokens from one address to another.
     * Note that while this function emits an Approval event, this is not required as per the specification,
     * and other compliant implementations may not emit the event.
     * @param from address The address which you want to send tokens from
     * @param to address The address which you want to transfer to
     * @param value uint256 the amount of tokens to be transferred
     */
    function transferFrom(address from, address to, uint256 value) public returns (bool) {
        _transfer(from, to, value);
        _approve(from, msg.sender, _allowed[from][msg.sender].sub(value));
        return true;
    }

    /**
     * @dev Increase the amount of tokens that an owner allowed to a spender.
     * approve should be called when _allowed[msg.sender][spender] == 0. To increment
     * allowed value is better to use this function to avoid 2 calls (and wait until
     * the first transaction is mined)
     * From MonolithDAO Token.sol
     * Emits an Approval event.
     * @param spender The address which will spend the funds.
     * @param addedValue The amount of tokens to increase the allowance by.
     */
    function increaseAllowance(address spender, uint256 addedValue) public returns (bool) {
        _approve(msg.sender, spender, _allowed[msg.sender][spender].add(addedValue));
        return true;
    }

    /**
     * @dev Decrease the amount of tokens that an owner allowed to a spender.
     * approve should be called when _allowed[msg.sender][spender] == 0. To decrement
     * allowed value is better to use this function to avoid 2 calls (and wait until
     * the first transaction is mined)
     * From MonolithDAO Token.sol
     * Emits an Approval event.
     * @param spender The address which will spend the funds.
     * @param subtractedValue The amount of tokens to decrease the allowance by.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public returns (bool) {
        _approve(msg.sender, spender, _allowed[msg.sender][spender].sub(subtractedValue));
        return true;
    }

    /**
     * @dev Transfer token for a specified addresses
     * @param from The address to transfer from.
     * @param to The address to transfer to.
     * @param value The amount to be transferred.
     */
    function _transfer(address from, address to, uint256 value) internal {
        require(to != address(0));

        _balances[from] = _balances[from].sub(value);
        _balances[to] = _balances[to].add(value);
        emit Transfer(from, to, value);
    }

    /**
     * @dev Internal function that mints an amount of the token and assigns it to
     * an account. This encapsulates the modification of balances such that the
     * proper events are emitted.
     * @param account The account that will receive the created tokens.
     * @param value The amount that will be created.
     */
    function _mint(address account, uint256 value) internal {
        require(account != address(0));

        _totalSupply = _totalSupply.add(value);
        _balances[account] = _balances[account].add(value);
        emit Transfer(address(0), account, value);
    }

    /**
     * @dev Internal function that burns an amount of the token of a given
     * account.
     * @param account The account whose tokens will be burnt.
     * @param value The amount that will be burnt.
     */
    function _burn(address account, uint256 value) internal {
        require(account != address(0));

        _totalSupply = _totalSupply.sub(value);
        _balances[account] = _balances[account].sub(value);
        emit Transfer(account, address(0), value);
    }

    /**
     * @dev Approve an address to spend another addresses' tokens.
     * @param owner The address that owns the tokens.
     * @param spender The address that will spend the tokens.
     * @param value The number of tokens that can be spent.
     */
    function _approve(address owner, address spender, uint256 value) internal {
        require(spender != address(0));
        require(owner != address(0));

        _allowed[owner][spender] = value;
        emit Approval(owner, spender, value);
    }

    /**
     * @dev Internal function that burns an amount of the token of a given
     * account, deducting from the sender's allowance for said account. Uses the
     * internal burn function.
     * Emits an Approval event (reflecting the reduced allowance).
     * @param account The account whose tokens will be burnt.
     * @param value The amount that will be burnt.
     */
    function _burnFrom(address account, uint256 value) internal {
        _burn(account, value);
        _approve(account, msg.sender, _allowed[account][msg.sender].sub(value));
    }
}

// File: contracts/token/InterfaceUpgradeAgent.sol

pragma solidity ^0.5.2;

/**
* @title Upgrade agent interface
*/
contract InterfaceUpgradeAgent {

    uint32 public revision;

    /**
     * @dev Reissue the tokens onto the new contract revision.
     * @param holder Holder (owner) of the tokens
     * @param tokenQty How many tokens to be issued
     * @return true if tokens properly reissued, false (or reverts) otherwise
     */
    function upgradeFrom(address holder, uint256 tokenQty) external returns (bool success);
}

// File: contracts/token/UpgradableToken.sol

pragma solidity ^0.5.2;





/**
 * @title UpgradableToken
 * @dev The UpgradableToken contract provides an option of upgrading the tokens to a new revision.
 * The contract owner only may enable the upgrade. After that anyone may trigger the upgrade.
 */

contract UpgradableToken is ERC20, Ownable {

    using SafeMath for uint256;

    uint32 public REVISION;

    /** Address of the contract that issues the new revision tokens. */
    address public upgradeAgent = address(0);

    /** How many tokens are upgraded. */
    uint256 public totalUpgraded;

    event Upgrade(address indexed _from, uint256 _value);
    event UpgradeEnabled(address agent);

    /**
     * @dev Set the upgrade agent (once only) thus enabling the upgrade.
     * @param _upgradeAgent Upgrade agent contract address
     * @param _revision Unique ID that agent contract must return on ".revision()"
     */
    function setUpgradeAgent(address _upgradeAgent, uint32 _revision)
        onlyOwner whenUpgradeDisabled external
    {
        require((_upgradeAgent != address(0)) && (_revision != 0));

        InterfaceUpgradeAgent agent = InterfaceUpgradeAgent(_upgradeAgent);
        require(agent.revision() == _revision);

        upgradeAgent = _upgradeAgent;
        emit UpgradeEnabled(_upgradeAgent);
    }

    /**
     * @dev Upgrade tokens to the new revision.
     * @param from address tokens of which to be upgraded
     */
    function upgrade(address from) whenUpgradeEnabled external {
        require(from != address(0));

        uint256 value = balanceOf(from);
        require(value > 0);

        // Take tokens out from the old contract
        _burn(from, value);
        // Issue the new revision tokens
        totalUpgraded = totalUpgraded.add(value);
        InterfaceUpgradeAgent agent = InterfaceUpgradeAgent(upgradeAgent);
        require(agent.upgradeFrom(from, value));

        emit Upgrade(from, value);
    }

    /**
    * @dev Modifier to make a function callable only when the upgrade is enabled.
    */
    modifier whenUpgradeEnabled() {
        require(upgradeAgent != address(0));
        _;
    }

    /**
    * @dev Modifier to make a function callable only when the upgrade is impossible.
    */
    modifier whenUpgradeDisabled() {
        require(upgradeAgent == address(0));
        _;
    }

}

// File: contracts/token/InnouToken.sol

pragma solidity ^0.5.2;





contract InnToken is ERC20Detailed, UpgradableToken, Secondary {
    using SafeMath for uint256;

    string public constant NAME = "INNOU.IO Token";
    string public constant SYMBOL = "INNOU";

    /**
     * @dev The decimals are only for visualization purposes -
     * just as operations with ethers are done in wei,
     * all operations with the tokens are done in "atom"
     * that is the smallest and indivisible token unit:
     *     1 token = 1x10^DECIMALS atom(s)
     */
    uint8 public constant DECIMALS = 14;

    /**
     * @dev On top of tokens to investors the contract mints extra tokens to the primary account
     * (i.e. the one that created the contract) at this percent rate:
     */
    uint256 public constant PREMIUM_MINT_PCT = 15;

    constructor()
    ERC20Detailed(NAME, SYMBOL, DECIMALS)
    public
    {
    }

    /**
     * @dev Function to mint tokens
     * @param to The address that will receive the minted tokens.
     * @param value The amount of tokens to mint.
     * @return A boolean that indicates if the operation was successful.
     */
    function mint(address to, uint256 value) public onlyPrimary returns (bool) {
        // mint tokens to the requested address
        _mint(to, value);
        // mint extra tokens to the primary account
        uint256 premium = PREMIUM_MINT_PCT.mul(value).div(100);
        _mint(primary(), premium);

        return true;
    }

}

// File: contracts/crowdsale/InnouCrowdsale.sol

pragma solidity ^0.5.2;



/*
 * @title InnCrowdsale
 * @dev Before the goal (soft-cap) is reached the contract acts as openzeppelin RefundablePostDeliveryCrowdsale.
 * As soon as the goal is reached the contract behaves like openzeppelin MintedCrowdsale
 */

contract InnCrowdsale is RefundablePostDeliveryCrowdsale {

    InnToken private _token = new InnToken();
    uint256 private _minPurchase;

    constructor(
        uint256 openingTime,
        uint256 closingTime,
        uint256 rate,
        address payable wallet,
        uint256 goal,
        uint256 minPurchase
    )
    Crowdsale(rate, wallet, _token)
    TimedCrowdsale(openingTime, closingTime)
    RefundableCrowdsale(goal)
    public{
        _minPurchase = minPurchase;
        _token.transferOwnership(msg.sender);
    }

    /**
    * @return the min purchase possible (in wei).
    */
    function minPurchase() public view returns (uint256) {
        return _minPurchase;
    }

    /**
     * @dev Transfer tokens held by the contract itself ("premium" tokens) to the wallet address.
     * Reverts if called by any address except the wallet.
     * @return true if tokens have been transferred.
     */
    function transferPremiumTokens() external returns (bool) {
        require(msg.sender == wallet());
        uint256 value = InnToken(_token).balanceOf(address(this));
        require(InnToken(_token).transfer(msg.sender, value));
        return true;
    }

    /**
     * @dev Like ERC20 tokens does, the contract provides the name the symbol and decimals for the token on sale.
     * It facilitates software wallets in getting info on the token.
     * @return the name of the token on sale.
     */
    function name() public view returns (string memory) {
        return _token.name();
    }
    /**
     * @return the symbol of the token on sale.
     */
    function symbol() public view returns (string memory) {
        return _token.symbol();
    }
    /**
     * @return the number of decimals of the token on sale.
     */
    function decimals() public view returns (uint8) {
        return _token.decimals();
    }

    /**
     * @return true if the crowdsale is open, false otherwise.
     */
    function isSaleOpen() public view returns (bool) {
        return TimedCrowdsale.isOpen();
    }

    /**
     * @dev Overrides parents by checking whether the REFUNDABLE part of the crowdsale is open.
     * (it considers if the goal has not yet been reached)
     * @return true if the refundable part of the crowdsale is open, false otherwise.
     */
    function isOpen() public view returns (bool) {
        if (goalReached()) {
            return false;
        }
        return super.isOpen();
    }

    /**
     * @dev Overrides parents by checking whether the REFUNDABLE part of the crowdsale has closed.
     * (i.e. considers if the goal has reached)
     * @return Whether the refundable part of the crowdsale has closed.
     */
    function hasClosed() public view returns (bool) {
        if (goalReached()) {
            return true;
        }
        return super.hasClosed();
    }

    /**
     * @dev Overrides parents by issuing tokens if the goal reached or storing the balance to mint them later otherwise.
     * @param beneficiary Token purchaser
     * @param tokenAmount Amount of tokens purchased
     */
    function _processPurchase(address beneficiary, uint256 tokenAmount) internal {
        if (goalReached()) {
            // mint tokens
            Crowdsale._processPurchase(beneficiary, tokenAmount);
        } else {
            // book balance to mint tokens later
            super._processPurchase(beneficiary, tokenAmount);
        }
    }

    /**
     * @dev Overrides fund forwarding.
     */
    function _forwardFunds() internal {
        if (goalReached()) {
            // directly to the wallet
            Crowdsale._forwardFunds();
        } else {
            // to the escrow
            RefundableCrowdsale._forwardFunds();
        }
    }

    /**
     * @dev Overrides pre-validation on token purchase transaction.
     * Replica of the openzeppelin methods except for re-defined isSaleOpen
     */
    function _preValidatePurchase(address beneficiary, uint256 weiAmount) internal view {
        // (note: this code runs before Crowdsale._weiRaised gets incremented with weiAmount)
        require(weiAmount >= _minPurchase);
        require(beneficiary != address(0));
        require(isSaleOpen());
    }

    /**
     * @dev Overrides delivery by minting tokens
     * (effectively, InnCrowdsale is MintedCrowdsale)
     * Replica of the openzeppelin MintedCrowdsale contract only own method
     * @param beneficiary Token purchaser
     * @param tokenAmount Number of tokens to be minted
     */
    function _deliverTokens(address beneficiary, uint256 tokenAmount) internal {
        require(InnToken(address(token())).mint(beneficiary, tokenAmount));
    }

}

// File: contracts/crowdsale/InnouCrowdsaleReady.sol

pragma solidity ^0.5.2;


contract InnCrowdsaleReady is InnCrowdsale {

    // From 06/07/2019 @ 12:00am (UTC) to 07/18/2019 @ 11:59pm (UTC), Goal: 2000 ETH
    uint256 public constant OpeningTime = 1559865600;
    uint256 public constant ClosingTime = 1563494399;
    uint256 public constant Goal = 2000 ether;

    /**
     * all operations with tokens are done in "atom"
     * that is the smallest and indivisible token unit:
     *   1 token = 1e+14 atom
     *
     * token(s) exchanged for ether(s) at the fixed rate:
     *   1 ether => 10,000 token (1 wei => 1 atom)
     */

    // 1 wei gets this number of atom(s)
    uint256 public constant Rate = 1;

    //   1 szabo = 1e+12 wei = 1e-6 ether
    uint256 public constant MinPurchase = 5000 szabo;

    constructor(address payable wallet)
    InnCrowdsale(
        OpeningTime,
        ClosingTime,
        Rate,
        wallet,
        Goal,
        MinPurchase
    )
    public {
    }

}