TuYa ZY-M100-S_3 smart human presence sensor doesn't work with v1.10.10

[funchenry]

present state dosent change the value.

Zigbee: v1.10.10
Node.js: v20.18.0
NPM: 10.8.2
js-Controller: v8.8.3

[asgothian]

Please test with the current GitHub version. During this rest, please enter the IEEE of the device into the state zigbee.x.info.debugmessages for the appropriate zigbee instance x and check for messages following this document. If no messages appear which include data which should affect the 'presence' state, no data is sent from the device to the adapter and the device may require

• a new configuration (can be triggered from the device tile)
• a newer coordinator firmware
• a change in the zigbee-herdsman-converters library.

The ZigBee adapter can only react to data received from the device.

Please also trigger the 'device query' button with the logging active to attempt to read the data from the device.

A.
Note: as far as I know, the JS-Controller version 8 is still in development, and has not been tested with the zigbee Adapter.

[funchenry]

The instructions say that an LED lights up when movement is detected. I can't confirm that. It doesn't seem to recognize anything or is waiting for settings that you can perhaps change with the app.

Zigbee Coordinator
type: ConBee2/RaspBee2
version: 0-0.38.120.0.
revision: 0x26780700
port: /dev/ttyACM0
channel: 11

Zigbee: v1.10.13
Node.js: v20.18.0
NPM: 10.8.2
js-Controller: v8.8.3