foo2lava-wrapper.1in

'\" t
.TH foo2lava-wrapper 1 "${MODpage}" "foo2lava-wrapper ${MODver}"
#ifndef OLDGROFF
#include "macros.man"
#endif
'\"==========================================================================
'\"	MANUAL PAGE SOURCE
'\"==========================================================================
.SH NAME
foo2lava-wrapper \- Convert Postscript into a LAVAFLOW or OPL printer stream
.SH SYNOPSIS
.B foo2lava-wrapper
.RI [ options "] [" ps-file ]
.SH DESCRIPTION
.B foo2lava-wrapper
is a Foomatic compatible printer wrapper for the \fBfoo2lava\fP printer driver.
This script reads a Postscript \fIps-file\fP or standard input
and converts it to Zenographics LAVAFLOW printer format
for driving
the Konica Minolta magicolor 1600W color laser printer,
the Konica Minolta magicolor 1680MF/1690MF AIO printer,
the Konica Minolta magicolor 2480/2490 MF AIO printer,
the Konica Minolta magicolor 2530 DL network color laser printer,
and other Zenographics-based LAVAFLOW printers.
.P
This script can be used in a standalone fashion, but is intended to
be called from a printer spooler system which uses the Foomatic
printer database.

.SH COMMAND LINE OPTIONS
.SS Normal Options
These are the options used to select the parameters of a
print job that are usually controlled on a per job basis.
.TP
.BI \-c
Print in color (else monochrome).
.TP
.BI \-C\0 colormode
Color correction mode [0].
.TS
n l .
1	Photos (using m2300w CRDs)
2	Photos and text (using m2300w CRDs)
3	Graphics and text (using m2300w CRDs)
10	ICM color profile (using -G *.icm file)
.TE
.TP
.BI \-d\0 duplex
Duplex code to send to printer [1].
.TS
| n l | n l | n l .
1	off	2	long edge	3	short edge
.TE
.TP
.BI \-m\0 media
Media code to send to printer [0].
.TS
l l l
l n n.
_
Media	2530DL
_
plain	0
transparency	4
thick stock	20
envelope	22
letterhead	23
postcard	25
labels	26
recycled	27
.TE
.TP
.BI \-p\0 paper
Paper size code to send to printer [2].
.TS
box;
| n l | n l.
1	executive	25	A5
2	letter	26	A4
3	legal	45	B5jis
80	env Monarch	65	B5iso
81	env #10	90	env DL
91	env C5	92	env B5
835	4x6" photo	837	10x15cm photo
.TE
.TP
.BI \-n\0 copies
Number of copies [1].
.TP
.BI \-r\0 xres x yres
Set device resolution in pixels/inch [1200x600].
.TP
.BI \-s\0 source
Source (Input Slot) code to send to printer [255].
.TS
| n l | n l.
1	Tray 1	255	auto
4	Tray 2	
.TE
.TP
.BI \-t
Draft mode.  Every other pixel is white.
.TP
.BI "\-2 \-3 \-4 \-5 \-6 \-8 \-9 \-10 \-12 \-14 \-15 \-16 \-18"
Print in N-up.  Requires the \fBpsutils\fP package.
.TP
.BI \-o\0 orient
Orientation used for N-up.
.TS
l l l.
Portrait	-op	(normal)
Landscape	-ol	(rotated 90 degrees anticlockwise)
Seascape	-os	(rotated 90 degrees clockwise)
.TE
.SS Printer Tweaking Options
These are the options used to customize the operation of \fBfoo2lava\fP
for a particular printer.
.TP
.BI \-u\0 xoff x yoff
Set the offset of the start of the printable region from the
upper left corner, in pixels [varies with paper size].
The defaults should work on the 2200DL and 2300DL, and have not
been tested on any other printers.
.TP
.BI \-l\0 xoff x yoff
Set the offset of the end of the printable region from the
lower right corner, in pixels [varies with paper size].
The defaults should work on the 2200DL and 2300DL, and have not
been tested on any other printers.
.TP
.BI \-L\0 mask
Send the logical clipping values from -u/-l in the LAVAFLOW stream.
\fBfoo2lava-wrapper\fP always runs Ghostscript with the ideal page dimensions,
so that the scale of the image is correct,
regardless whether or not the printer has unprintable regions.
This option is used to move the position of the clipped image
back to where it belongs on the page.  The default is to send
the amount which was clipped by -u and -l, and should be
good in most cases.
.TS
l l.
0	don't send any logical clipping amounts
1	only send Y clipping amount
2	only send X clipping amount
3	send both X and Y clipping amounts
.TE
.TP
.BI \-z\0 model
Model.  The  default is [0].
.TS
l l l.
model	protocol	Description
0	LAVAFLOW	magicolor 2490 MF
0	LAVAFLOW	magicolor 2530 DL
1	OPL	magicolor 2480 MF
2	LAVAFLOW	magicolor 1600W
2	LAVAFLOW	magicolor 1680MF
2	LAVAFLOW	magicolor 1690MF
.TE
.SS Color Tweaking Options
These are the options used to control the quality of color output.
Color correction is currently a WORK IN PROGRESS.
.TP
.BI \-g\0 gsopts
Additional options to pass to Ghostscript, such as -g\(lq-dDITHERPPI=nnn\(rq,
etc.  This option may appear more than once.
.TP
.BI \-G\0 profile.icm
Convert \fIprofile.icm\fP to a Postscript color rendering
dictionary (CRD) using \fBfoo2zjs-icc2ps\fP and
adjust the printer colors by using the Postscript \fBsetcolorrendering\fP
operator.  (WORK IN PROGRESS).
.TP
.BI \-G\0 gamma-file.ps
Prepend \fIgamma-file.ps\fP to the Postscript input to perform
color correction using the \fBsetcolortransfer\fP Postscript operator.
For example, the file might contain:
.br
{0.333 exp} {0.333 exp} {0.333 exp} {0.333 exp} setcolortransfer
.TP
.BI \-I\0 intent
Select profile intent from the ICM file.
0=Perceptual, 1=Colorimetric, 2=Saturation, 3=Absolute.
Default is 0 (perceptual).
.SS Debugging Options
These options are used for debugging \fBfoo2lava\fP and its wrapper.
.TP
.BI \-S\0 plane
Output just a single color plane from a color print and print it
on the black plane.  The default is to output all color planes.
.TS
l l.
1	Cyan
2	Magenta
3	Yellow
4	Black
.TE
.TP
.BI \-D\0 level
Set Debug level [0].

.SH EXAMPLES
Create a monochrome LAVAFLOW stream from a Postscript document,
examine it, and then print it using a RAW print queue:

.RS
.nf
foo2lava-wrapper testpage.ps > testpage.zm
lavadecode < testpage.zm
lpr -P raw testpage.zm
.fi
.RE
.P
Create a color LAVAFLOW stream from a Postscript document:

.RS
.nf
foo2lava-wrapper -c testpage.ps > testpage.zc
.fi
.RE

.SH FILES
.BR /usr/bin/foo2lava-wrapper
.SH SEE ALSO
.BR foo2lava (1),
.BR lavadecode (1)
.BR opldecode (1)
.SH "AUTHOR"
Rick Richardson <rick.richardson@comcast.net>
.br
${URLZJS}/
'\"
'\"
'\"
.em pdf_outline