Skip to content
This repository has been archived by the owner on Jan 5, 2025. It is now read-only.

REQUIRED process [franka_control-3] has died error when running driver node #39

Open
williamsnider opened this issue Dec 1, 2021 · 3 comments
Open

REQUIRED process [franka_control-3] has died error when running driver node #39

williamsnider opened this issue Dec 1, 2021 · 3 comments

Comments

@williamsnider
Copy link

I'm having trouble getting the franka_ros_interface to connect with my real robot.

What I've done so far

  1. updated the franka.sh file such that FRANKA_ROBOT_IP="172.16.0.2", your_ip="172.16.0.1", and ros_version="noetic" and moved it into the root of my catkin workspace (/home/oclab/code/panda_robot/franka.sh)
  2. confirmed that I can run libfranka examples. Entering /home/oclab/code/libfranka/build/examples/communication_test 172.16.0.2 moves the robot and returns the expected result
  3. confirmed that I can run franka_ros examples. Entering
source /home/oclab/code/panda_robot/devel/setup.bash
roslaunch franka_example_controllers joint_impedance_example_controller.launch \
  robot_ip:=172.16.0.2 load_gripper:=true

moves the robot. (panda_robot is my catkin workspace)

But when I go to launch the franka_ros_interface, I get the following errors:

(base) oclab@panda1:~/code/panda_robot$ source /home/oclab/code/panda_robot/devel/setup.bash
(base) oclab@panda1:~/code/panda_robot$ ./franka.sh master

ROBOT: 172.16.0.2

[franka <Master> - [email protected]] (base) oclab@panda1:~/code/panda_robot$ roslaunch franka_interface interface.launch
... logging to /home/oclab/.ros/log/04472a8a-52fb-11ec-8004-61c0d9261ce8/roslaunch-panda1-16578.log
Checking log directory for disk usage. This may take a while.
Press Ctrl-C to interrupt
Done checking log file disk usage. Usage is <1GB.

xacro: in-order processing became default in ROS Melodic. You can drop the option.
started roslaunch server http://172.16.0.1:42079/

SUMMARY
========

PARAMETERS
 * /controllers_config/command_timeout: 0.2
 * /controllers_config/default_controller: position_joint_tr...
 * /controllers_config/impedance_controller: franka_ros_interf...
 * /controllers_config/position_controller: franka_ros_interf...
 * /controllers_config/torque_controller: franka_ros_interf...
 * /controllers_config/trajectory_controller: position_joint_tr...
 * /controllers_config/velocity_controller: franka_ros_interf...
 * /franka_control/publish_frequency: 1000
 * /franka_gripper/default_grasp_epsilon/inner: 0.005
 * /franka_gripper/default_grasp_epsilon/outer: 0.005
 * /franka_gripper/default_speed: 0.1
 * /franka_gripper/joint_names: ['panda_finger_jo...
 * /franka_gripper/publish_rate: 30
 * /franka_gripper/robot_ip: 172.16.0.2
 * /franka_gripper/stop_at_shutdown: False
 * /franka_ros_interface/custom_franka_state_controller/arm_id: panda
 * /franka_ros_interface/custom_franka_state_controller/joint_names: ['panda_joint1', ...
 * /franka_ros_interface/custom_franka_state_controller/publish_rate: 1000
 * /franka_ros_interface/custom_franka_state_controller/type: franka_interface/...
 * /franka_ros_interface/effort_joint_impedance_controller/arm_id: panda
 * /franka_ros_interface/effort_joint_impedance_controller/coriolis_factor: 1.0
 * /franka_ros_interface/effort_joint_impedance_controller/d_gains: [50.0, 50.0, 50.0...
 * /franka_ros_interface/effort_joint_impedance_controller/joint_names: ['panda_joint1', ...
 * /franka_ros_interface/effort_joint_impedance_controller/k_gains: [1200.0, 1000.0, ...
 * /franka_ros_interface/effort_joint_impedance_controller/publish_rate: 30.0
 * /franka_ros_interface/effort_joint_impedance_controller/type: franka_ros_contro...
 * /franka_ros_interface/effort_joint_position_controller/arm_id: panda
 * /franka_ros_interface/effort_joint_position_controller/d_gains: [50.0, 50.0, 50.0...
 * /franka_ros_interface/effort_joint_position_controller/joint_names: ['panda_joint1', ...
 * /franka_ros_interface/effort_joint_position_controller/k_gains: [1200.0, 1000.0, ...
 * /franka_ros_interface/effort_joint_position_controller/publish_rate: 30.0
 * /franka_ros_interface/effort_joint_position_controller/type: franka_ros_contro...
 * /franka_ros_interface/effort_joint_torque_controller/arm_id: panda
 * /franka_ros_interface/effort_joint_torque_controller/compensate_coriolis: False
 * /franka_ros_interface/effort_joint_torque_controller/joint_names: ['panda_joint1', ...
 * /franka_ros_interface/effort_joint_torque_controller/type: franka_ros_contro...
 * /franka_ros_interface/position_joint_position_controller/joint_names: ['panda_joint1', ...
 * /franka_ros_interface/position_joint_position_controller/type: franka_ros_contro...
 * /franka_ros_interface/velocity_joint_velocity_controller/joint_names: ['panda_joint1', ...
 * /franka_ros_interface/velocity_joint_velocity_controller/type: franka_ros_contro...
 * /gripper_config/default_grasp_epsilon/inner: 0.005
 * /gripper_config/default_grasp_epsilon/outer: 0.005
 * /gripper_config/default_speed: 0.1
 * /gripper_config/joint_names: ['panda_finger_jo...
 * /joint_state_desired_publisher/rate: 1000
 * /joint_state_desired_publisher/source_list: ['franka_ros_inte...
 * /joint_state_publisher/rate: 1000
 * /joint_state_publisher/source_list: ['franka_ros_inte...
 * /move_group/allow_trajectory_execution: True
 * /move_group/controller_list: [{'name': 'positi...
 * /move_group/hand/planner_configs: ['SBLkConfigDefau...
 * /move_group/jiggle_fraction: 0.05
 * /move_group/max_range: 5.0
 * /move_group/max_safe_path_cost: 1
 * /move_group/moveit_controller_manager: moveit_simple_con...
 * /move_group/moveit_manage_controllers: True
 * /move_group/octomap_frame: camera_rgb_optica...
 * /move_group/octomap_resolution: 0.05
 * /move_group/panda_arm/planner_configs: ['SBLkConfigDefau...
 * /move_group/panda_arm_hand/planner_configs: ['SBLkConfigDefau...
 * /move_group/planner_configs/BFMTkConfigDefault/balanced: 0
 * /move_group/planner_configs/BFMTkConfigDefault/cache_cc: 1
 * /move_group/planner_configs/BFMTkConfigDefault/extended_fmt: 1
 * /move_group/planner_configs/BFMTkConfigDefault/heuristics: 1
 * /move_group/planner_configs/BFMTkConfigDefault/nearest_k: 1
 * /move_group/planner_configs/BFMTkConfigDefault/num_samples: 1000
 * /move_group/planner_configs/BFMTkConfigDefault/optimality: 1
 * /move_group/planner_configs/BFMTkConfigDefault/radius_multiplier: 1.0
 * /move_group/planner_configs/BFMTkConfigDefault/type: geometric::BFMT
 * /move_group/planner_configs/BKPIECEkConfigDefault/border_fraction: 0.9
 * /move_group/planner_configs/BKPIECEkConfigDefault/failed_expansion_score_factor: 0.5
 * /move_group/planner_configs/BKPIECEkConfigDefault/min_valid_path_fraction: 0.5
 * /move_group/planner_configs/BKPIECEkConfigDefault/range: 0.0
 * /move_group/planner_configs/BKPIECEkConfigDefault/type: geometric::BKPIECE
 * /move_group/planner_configs/BiESTkConfigDefault/range: 0.0
 * /move_group/planner_configs/BiESTkConfigDefault/type: geometric::BiEST
 * /move_group/planner_configs/BiTRRTkConfigDefault/cost_threshold: 1e300
 * /move_group/planner_configs/BiTRRTkConfigDefault/frountier_node_ratio: 0.1
 * /move_group/planner_configs/BiTRRTkConfigDefault/frountier_threshold: 0.0
 * /move_group/planner_configs/BiTRRTkConfigDefault/init_temperature: 100
 * /move_group/planner_configs/BiTRRTkConfigDefault/range: 0.0
 * /move_group/planner_configs/BiTRRTkConfigDefault/temp_change_factor: 0.1
 * /move_group/planner_configs/BiTRRTkConfigDefault/type: geometric::BiTRRT
 * /move_group/planner_configs/ESTkConfigDefault/goal_bias: 0.05
 * /move_group/planner_configs/ESTkConfigDefault/range: 0.0
 * /move_group/planner_configs/ESTkConfigDefault/type: geometric::EST
 * /move_group/planner_configs/FMTkConfigDefault/cache_cc: 1
 * /move_group/planner_configs/FMTkConfigDefault/extended_fmt: 1
 * /move_group/planner_configs/FMTkConfigDefault/heuristics: 0
 * /move_group/planner_configs/FMTkConfigDefault/nearest_k: 1
 * /move_group/planner_configs/FMTkConfigDefault/num_samples: 1000
 * /move_group/planner_configs/FMTkConfigDefault/radius_multiplier: 1.1
 * /move_group/planner_configs/FMTkConfigDefault/type: geometric::FMT
 * /move_group/planner_configs/KPIECEkConfigDefault/border_fraction: 0.9
 * /move_group/planner_configs/KPIECEkConfigDefault/failed_expansion_score_factor: 0.5
 * /move_group/planner_configs/KPIECEkConfigDefault/goal_bias: 0.05
 * /move_group/planner_configs/KPIECEkConfigDefault/min_valid_path_fraction: 0.5
 * /move_group/planner_configs/KPIECEkConfigDefault/range: 0.0
 * /move_group/planner_configs/KPIECEkConfigDefault/type: geometric::KPIECE
 * /move_group/planner_configs/LBKPIECEkConfigDefault/border_fraction: 0.9
 * /move_group/planner_configs/LBKPIECEkConfigDefault/min_valid_path_fraction: 0.5
 * /move_group/planner_configs/LBKPIECEkConfigDefault/range: 0.0
 * /move_group/planner_configs/LBKPIECEkConfigDefault/type: geometric::LBKPIECE
 * /move_group/planner_configs/LBTRRTkConfigDefault/epsilon: 0.4
 * /move_group/planner_configs/LBTRRTkConfigDefault/goal_bias: 0.05
 * /move_group/planner_configs/LBTRRTkConfigDefault/range: 0.0
 * /move_group/planner_configs/LBTRRTkConfigDefault/type: geometric::LBTRRT
 * /move_group/planner_configs/LazyPRMkConfigDefault/range: 0.0
 * /move_group/planner_configs/LazyPRMkConfigDefault/type: geometric::LazyPRM
 * /move_group/planner_configs/LazyPRMstarkConfigDefault/type: geometric::LazyPR...
 * /move_group/planner_configs/PDSTkConfigDefault/type: geometric::PDST
 * /move_group/planner_configs/PRMkConfigDefault/max_nearest_neighbors: 10
 * /move_group/planner_configs/PRMkConfigDefault/type: geometric::PRM
 * /move_group/planner_configs/PRMstarkConfigDefault/type: geometric::PRMstar
 * /move_group/planner_configs/ProjESTkConfigDefault/goal_bias: 0.05
 * /move_group/planner_configs/ProjESTkConfigDefault/range: 0.0
 * /move_group/planner_configs/ProjESTkConfigDefault/type: geometric::ProjEST
 * /move_group/planner_configs/RRTConnectkConfigDefault/range: 0.0
 * /move_group/planner_configs/RRTConnectkConfigDefault/type: geometric::RRTCon...
 * /move_group/planner_configs/RRTkConfigDefault/goal_bias: 0.05
 * /move_group/planner_configs/RRTkConfigDefault/range: 0.0
 * /move_group/planner_configs/RRTkConfigDefault/type: geometric::RRT
 * /move_group/planner_configs/RRTstarkConfigDefault/delay_collision_checking: 1
 * /move_group/planner_configs/RRTstarkConfigDefault/goal_bias: 0.05
 * /move_group/planner_configs/RRTstarkConfigDefault/range: 0.0
 * /move_group/planner_configs/RRTstarkConfigDefault/type: geometric::RRTstar
 * /move_group/planner_configs/SBLkConfigDefault/range: 0.0
 * /move_group/planner_configs/SBLkConfigDefault/type: geometric::SBL
 * /move_group/planner_configs/SPARSkConfigDefault/dense_delta_fraction: 0.001
 * /move_group/planner_configs/SPARSkConfigDefault/max_failures: 1000
 * /move_group/planner_configs/SPARSkConfigDefault/sparse_delta_fraction: 0.25
 * /move_group/planner_configs/SPARSkConfigDefault/stretch_factor: 3.0
 * /move_group/planner_configs/SPARSkConfigDefault/type: geometric::SPARS
 * /move_group/planner_configs/SPARStwokConfigDefault/dense_delta_fraction: 0.001
 * /move_group/planner_configs/SPARStwokConfigDefault/max_failures: 5000
 * /move_group/planner_configs/SPARStwokConfigDefault/sparse_delta_fraction: 0.25
 * /move_group/planner_configs/SPARStwokConfigDefault/stretch_factor: 3.0
 * /move_group/planner_configs/SPARStwokConfigDefault/type: geometric::SPARStwo
 * /move_group/planner_configs/STRIDEkConfigDefault/degree: 16
 * /move_group/planner_configs/STRIDEkConfigDefault/estimated_dimension: 0.0
 * /move_group/planner_configs/STRIDEkConfigDefault/goal_bias: 0.05
 * /move_group/planner_configs/STRIDEkConfigDefault/max_degree: 18
 * /move_group/planner_configs/STRIDEkConfigDefault/max_pts_per_leaf: 6
 * /move_group/planner_configs/STRIDEkConfigDefault/min_degree: 12
 * /move_group/planner_configs/STRIDEkConfigDefault/min_valid_path_fraction: 0.2
 * /move_group/planner_configs/STRIDEkConfigDefault/range: 0.0
 * /move_group/planner_configs/STRIDEkConfigDefault/type: geometric::STRIDE
 * /move_group/planner_configs/STRIDEkConfigDefault/use_projected_distance: 0
 * /move_group/planner_configs/TRRTkConfigDefault/frountierNodeRatio: 0.1
 * /move_group/planner_configs/TRRTkConfigDefault/frountier_threshold: 0.0
 * /move_group/planner_configs/TRRTkConfigDefault/goal_bias: 0.05
 * /move_group/planner_configs/TRRTkConfigDefault/init_temperature: 10e-6
 * /move_group/planner_configs/TRRTkConfigDefault/k_constant: 0.0
 * /move_group/planner_configs/TRRTkConfigDefault/max_states_failed: 10
 * /move_group/planner_configs/TRRTkConfigDefault/min_temperature: 10e-10
 * /move_group/planner_configs/TRRTkConfigDefault/range: 0.0
 * /move_group/planner_configs/TRRTkConfigDefault/temp_change_factor: 2.0
 * /move_group/planner_configs/TRRTkConfigDefault/type: geometric::TRRT
 * /move_group/planner_configs/TrajOptDefault/type: geometric::TrajOpt
 * /move_group/planning_plugin: ompl_interface/OM...
 * /move_group/planning_scene_monitor/publish_geometry_updates: True
 * /move_group/planning_scene_monitor/publish_planning_scene: True
 * /move_group/planning_scene_monitor/publish_state_updates: True
 * /move_group/planning_scene_monitor/publish_transforms_updates: True
 * /move_group/request_adapters: default_planner_r...
 * /move_group/sensors: [{'sensor_plugin'...
 * /move_group/start_state_max_bounds_error: 0.1
 * /move_group/trajectory_execution/allowed_execution_duration_scaling: 1.2
 * /move_group/trajectory_execution/allowed_goal_duration_margin: 0.5
 * /move_group/trajectory_execution/allowed_start_tolerance: 0.01
 * /position_joint_trajectory_controller/constraints/goal_time: 0.5
 * /position_joint_trajectory_controller/constraints/panda_joint1/goal: 0.05
 * /position_joint_trajectory_controller/constraints/panda_joint2/goal: 0.05
 * /position_joint_trajectory_controller/constraints/panda_joint3/goal: 0.05
 * /position_joint_trajectory_controller/constraints/panda_joint4/goal: 0.05
 * /position_joint_trajectory_controller/constraints/panda_joint5/goal: 0.05
 * /position_joint_trajectory_controller/constraints/panda_joint6/goal: 0.05
 * /position_joint_trajectory_controller/constraints/panda_joint7/goal: 0.05
 * /position_joint_trajectory_controller/joints: ['panda_joint1', ...
 * /position_joint_trajectory_controller/type: position_controll...
 * /robot_config/arm_id: panda
 * /robot_config/collision_config/lower_force_thresholds_acceleration: [20.0, 20.0, 20.0...
 * /robot_config/collision_config/lower_force_thresholds_nominal: [20.0, 20.0, 20.0...
 * /robot_config/collision_config/lower_torque_thresholds_acceleration: [20.0, 20.0, 18.0...
 * /robot_config/collision_config/lower_torque_thresholds_nominal: [20.0, 20.0, 18.0...
 * /robot_config/collision_config/upper_force_thresholds_acceleration: [20.0, 20.0, 20.0...
 * /robot_config/collision_config/upper_force_thresholds_nominal: [20.0, 20.0, 20.0...
 * /robot_config/collision_config/upper_torque_thresholds_acceleration: [20.0, 20.0, 18.0...
 * /robot_config/collision_config/upper_torque_thresholds_nominal: [20.0, 20.0, 18.0...
 * /robot_config/cutoff_frequency: 100
 * /robot_config/internal_controller: joint_impedance
 * /robot_config/joint_config/joint_acceleration_limit/panda_joint1: 15.0
 * /robot_config/joint_config/joint_acceleration_limit/panda_joint2: 7.5
 * /robot_config/joint_config/joint_acceleration_limit/panda_joint3: 10.0
 * /robot_config/joint_config/joint_acceleration_limit/panda_joint4: 12.5
 * /robot_config/joint_config/joint_acceleration_limit/panda_joint5: 15.0
 * /robot_config/joint_config/joint_acceleration_limit/panda_joint6: 20.0
 * /robot_config/joint_config/joint_acceleration_limit/panda_joint7: 20.0
 * /robot_config/joint_config/joint_effort_limit/panda_joint1: 87
 * /robot_config/joint_config/joint_effort_limit/panda_joint2: 87
 * /robot_config/joint_config/joint_effort_limit/panda_joint3: 87
 * /robot_config/joint_config/joint_effort_limit/panda_joint4: 87
 * /robot_config/joint_config/joint_effort_limit/panda_joint5: 12
 * /robot_config/joint_config/joint_effort_limit/panda_joint6: 12
 * /robot_config/joint_config/joint_effort_limit/panda_joint7: 12
 * /robot_config/joint_config/joint_position_limit/lower/panda_joint1: -2.8973
 * /robot_config/joint_config/joint_position_limit/lower/panda_joint2: -1.7628
 * /robot_config/joint_config/joint_position_limit/lower/panda_joint3: -2.8973
 * /robot_config/joint_config/joint_position_limit/lower/panda_joint4: -3.0718
 * /robot_config/joint_config/joint_position_limit/lower/panda_joint5: -2.8973
 * /robot_config/joint_config/joint_position_limit/lower/panda_joint6: -0.0175
 * /robot_config/joint_config/joint_position_limit/lower/panda_joint7: -2.8973
 * /robot_config/joint_config/joint_position_limit/upper/panda_joint1: 2.8973
 * /robot_config/joint_config/joint_position_limit/upper/panda_joint2: 1.7628
 * /robot_config/joint_config/joint_position_limit/upper/panda_joint3: 2.8973
 * /robot_config/joint_config/joint_position_limit/upper/panda_joint4: -0.0698
 * /robot_config/joint_config/joint_position_limit/upper/panda_joint5: 2.8973
 * /robot_config/joint_config/joint_position_limit/upper/panda_joint6: 3.7525
 * /robot_config/joint_config/joint_position_limit/upper/panda_joint7: 2.8973
 * /robot_config/joint_config/joint_velocity_limit/panda_joint1: 2.175
 * /robot_config/joint_config/joint_velocity_limit/panda_joint2: 2.175
 * /robot_config/joint_config/joint_velocity_limit/panda_joint3: 2.175
 * /robot_config/joint_config/joint_velocity_limit/panda_joint4: 2.175
 * /robot_config/joint_config/joint_velocity_limit/panda_joint5: 2.61
 * /robot_config/joint_config/joint_velocity_limit/panda_joint6: 2.61
 * /robot_config/joint_config/joint_velocity_limit/panda_joint7: 2.61
 * /robot_config/joint_limit_warning_threshold: 0.1
 * /robot_config/joint_names: ['panda_joint1', ...
 * /robot_config/neutral_pose/panda_joint1: -0.01779206022777...
 * /robot_config/neutral_pose/panda_joint2: -0.7601235411041661
 * /robot_config/neutral_pose/panda_joint3: 0.019782607023391807
 * /robot_config/neutral_pose/panda_joint4: -2.342050140544315
 * /robot_config/neutral_pose/panda_joint5: 0.029840531355804868
 * /robot_config/neutral_pose/panda_joint6: 1.5411935298621688
 * /robot_config/neutral_pose/panda_joint7: 0.7534486589746342
 * /robot_config/rate_limiting: True
 * /robot_config/realtime_config: enforce
 * /robot_config/robot_ip: 172.16.0.2
 * /robot_description: <?xml version="1....
 * /robot_description_kinematics/panda_arm/kinematics_solver: kdl_kinematics_pl...
 * /robot_description_kinematics/panda_arm/kinematics_solver_search_resolution: 0.005
 * /robot_description_kinematics/panda_arm/kinematics_solver_timeout: 0.05
 * /robot_description_planning/joint_limits/panda_finger_joint1/has_acceleration_limits: False
 * /robot_description_planning/joint_limits/panda_finger_joint1/has_velocity_limits: True
 * /robot_description_planning/joint_limits/panda_finger_joint1/max_acceleration: 0
 * /robot_description_planning/joint_limits/panda_finger_joint1/max_velocity: 0.1
 * /robot_description_planning/joint_limits/panda_finger_joint2/has_acceleration_limits: False
 * /robot_description_planning/joint_limits/panda_finger_joint2/has_velocity_limits: True
 * /robot_description_planning/joint_limits/panda_finger_joint2/max_acceleration: 0
 * /robot_description_planning/joint_limits/panda_finger_joint2/max_velocity: 0.1
 * /robot_description_planning/joint_limits/panda_joint1/has_acceleration_limits: True
 * /robot_description_planning/joint_limits/panda_joint1/has_velocity_limits: True
 * /robot_description_planning/joint_limits/panda_joint1/max_acceleration: 3.75
 * /robot_description_planning/joint_limits/panda_joint1/max_velocity: 2.175
 * /robot_description_planning/joint_limits/panda_joint2/has_acceleration_limits: True
 * /robot_description_planning/joint_limits/panda_joint2/has_velocity_limits: True
 * /robot_description_planning/joint_limits/panda_joint2/max_acceleration: 1.875
 * /robot_description_planning/joint_limits/panda_joint2/max_velocity: 2.175
 * /robot_description_planning/joint_limits/panda_joint3/has_acceleration_limits: True
 * /robot_description_planning/joint_limits/panda_joint3/has_velocity_limits: True
 * /robot_description_planning/joint_limits/panda_joint3/max_acceleration: 2.5
 * /robot_description_planning/joint_limits/panda_joint3/max_velocity: 2.175
 * /robot_description_planning/joint_limits/panda_joint4/has_acceleration_limits: True
 * /robot_description_planning/joint_limits/panda_joint4/has_velocity_limits: True
 * /robot_description_planning/joint_limits/panda_joint4/max_acceleration: 3.125
 * /robot_description_planning/joint_limits/panda_joint4/max_velocity: 2.175
 * /robot_description_planning/joint_limits/panda_joint5/has_acceleration_limits: True
 * /robot_description_planning/joint_limits/panda_joint5/has_velocity_limits: True
 * /robot_description_planning/joint_limits/panda_joint5/max_acceleration: 3.75
 * /robot_description_planning/joint_limits/panda_joint5/max_velocity: 2.61
 * /robot_description_planning/joint_limits/panda_joint6/has_acceleration_limits: True
 * /robot_description_planning/joint_limits/panda_joint6/has_velocity_limits: True
 * /robot_description_planning/joint_limits/panda_joint6/max_acceleration: 5
 * /robot_description_planning/joint_limits/panda_joint6/max_velocity: 2.61
 * /robot_description_planning/joint_limits/panda_joint7/has_acceleration_limits: True
 * /robot_description_planning/joint_limits/panda_joint7/has_velocity_limits: True
 * /robot_description_planning/joint_limits/panda_joint7/max_acceleration: 5
 * /robot_description_planning/joint_limits/panda_joint7/max_velocity: 2.61
 * /robot_description_semantic: <?xml version="1....
 * /robot_state_publisher/publish_frequency: 1000
 * /rosdistro: noetic
 * /rosversion: 1.15.11

NODES
  /
    base_to_link0 (tf/static_transform_publisher)
    controllers (controller_manager/spawner)
    demo_scene_loader (franka_moveit/create_demo_planning_scene.py)
    franka_control (franka_interface/custom_franka_control_node)
    franka_gripper (franka_gripper/franka_gripper_node)
    joint_state_desired_publisher (joint_state_publisher/joint_state_publisher)
    joint_state_publisher (joint_state_publisher/joint_state_publisher)
    load_controllers (controller_manager/controller_manager)
    move_group (moveit_ros_move_group/move_group)
    robot_state_publisher (robot_state_publisher/robot_state_publisher)
    state_controller_spawner (controller_manager/spawner)
    world_to_base (tf/static_transform_publisher)

auto-starting new master
process[master]: started with pid [16636]
ROS_MASTER_URI=http://172.16.0.1:11311

setting /run_id to 04472a8a-52fb-11ec-8004-61c0d9261ce8
process[rosout-1]: started with pid [16646]
started core service [/rosout]
process[franka_gripper-2]: started with pid [16653]
process[franka_control-3]: started with pid [16654]
process[state_controller_spawner-4]: started with pid [16655]
/home/oclab/code/panda_robot/devel/lib/franka_interface/custom_franka_control_node: Symbol `_ZTVN9franka_hw8FrankaHWE' has different size in shared object, consider re-linking
/home/oclab/code/panda_robot/devel/lib/franka_interface/custom_franka_control_node: symbol lookup error: /home/oclab/code/panda_robot/devel/lib/franka_interface/custom_franka_control_node: undefined symbol: _ZNK9franka_hw8FrankaHW7controlERKSt8functionIFbRKN3ros4TimeERKNS2_8DurationEEE
[ INFO] [1638399861.230149073]: franka_gripper_node: Found default_speed 0.1
process[robot_state_publisher-5]: started with pid [16658]
[ INFO] [1638399861.230586104]: franka_gripper_node: Found default_grasp_epsilon inner: 0.005, outer: 0.005
================================================================================REQUIRED process [franka_control-3] has died!
process has died [pid 16654, exit code 127, cmd /home/oclab/code/panda_robot/devel/lib/franka_interface/custom_franka_control_node __name:=franka_control __log:=/home/oclab/.ros/log/04472a8a-52fb-11ec-8004-61c0d9261ce8/franka_control-3.log].
log file: /home/oclab/.ros/log/04472a8a-52fb-11ec-8004-61c0d9261ce8/franka_control-3*.log
Initiating shutdown!
================================================================================
RLException: cannot add process [joint_state_publisher-6] after process monitor has been shut down
The traceback for the exception was written to the log file
[robot_state_publisher-5] killing on exit
[state_controller_spawner-4] killing on exit
[franka_control-3] killing on exit
[franka_gripper-2] killing on exit
[franka <Master> - [email protected]] (base) oclab@panda1:~/code/panda_robot$ [INFO] [1638399861.495801]: Controller Spawner: Waiting for service controller_manager/load_controller
[WARN] [1638399891.671958]: Controller Spawner couldn't find the expected controller_manager ROS interface.

In case the output of /home/oclab/code/libfranka/build/examples/echo_robot_state 172.16.0.2 is helpful, here it is:

{"O_T_EE": [0.998995,-0.0438993,-0.00790835,0,-0.0436144,-0.998488,0.0331812,0,-0.0093532,-0.0328035,-0.999418,0,0.302331,0.173787,0.465025,1], "O_T_EE_d": [0.998995,-0.0438995,-0.00791904,0,-0.0436141,-0.998487,0.0331915,0,-0.00936433,-0.0328134,-0.999418,0,0.302335,0.173788,0.465021,1], "F_T_NE": [0.7071,-0.7071,0,0,0.7071,0.7071,0,0,0,0,1,0,0,0,0.1034,1], "NE_T_EE": [1,0,0,0,0,1,0,0,0,0,1,0,0,0,0,1], "F_T_EE": [0.7071,-0.7071,0,0,0.7071,0.7071,0,0,0,0,1,0,0,0,0.1034,1], "EE_T_K": [1,0,0,0,0,1,0,0,0,0,1,0,0,0,0,1], "m_ee": 0.73, "F_x_Cee": [-0.01,0,0.03], "I_ee": [0.001,0,0,0,0.0025,0,0,0,0.0017], "m_load": 0, "F_x_Cload": [0,0,0], "I_load": [0,0,0,0,0,0,0,0,0], "m_total": 0.73, "F_x_Ctotal": [-0.01,0,0.03], "I_total": [0.001,0,0,0,0.0025,0,0,0,0.0017], "elbow": [0.0118932,-1], "elbow_d": [0.011903,-1], "elbow_c": [0.011903,-1], "delbow_c": [0,0], "ddelbow_c": [0,0], "tau_J": [-0.0262443,-8.68335,-0.787238,22.7851,0.814284,2.13832,-0.0168133], "tau_J_d": [0,0,0,0,0,0,0], "dtau_J": [54.0963,-219.42,41.8383,13.3756,36.4945,-35.4212,5.58874], "q": [0.519095,-0.646616,0.0118932,-2.32042,-0.0164992,1.6492,1.35918], "dq": [-0.000521154,0.00229842,-0.00135589,-0.000156747,-0.000637353,0.000470845,-0.000805113], "q_d": [0.519081,-0.646593,0.011903,-2.32041,-0.0164965,1.6492,1.35917], "dq_d": [0,0,0,0,0,0,0], "ddq_d": [0,0,0,0,0,0,0], "joint_contact": [0,0,0,0,0,0,0], "cartesian_contact": [0,0,0,0,0,0], "joint_collision": [0,0,0,0,0,0,0], "cartesian_collision": [0,0,0,0,0,0], "tau_ext_hat_filtered": [-0.0416108,-0.224339,-0.0550402,0.539869,0.0756463,-0.0680105,-0.0123975], "O_F_ext_hat_K": [0.355217,0.153844,1.5997,0.136658,-0.0323647,-0.0210621], "K_F_ext_hat_K": [0.335462,-0.116026,-1.60714,-0.0822474,-0.282803,-0.00289346], "O_dP_EE_d": [0,0,0,0,0,0], "O_T_EE_c": [0.998995,-0.0438995,-0.00791904,0,-0.0436141,-0.998487,0.0331915,0,-0.00936433,-0.0328134,-0.999418,0,0.302335,0.173788,0.465021,1], "O_dP_EE_c": [0,0,0,0,0,0], "O_ddP_EE_c": [0,0,0,0,0,0], "theta": [0.519093,-0.647225,0.0118372,-2.31882,-0.0164088,1.64944,1.35917], "dtheta": [0,0,0,0,0,0,0], "current_errors": [], "last_motion_errors": [], "control_command_success_rate": 0, "robot_mode": "Idle", "time": 1229644}
Done.

Any ideas as to what might be causing this?
@williamsnider
Copy link
Author

Additionally, running roscore seems to work (I think?)

(base) oclab@panda1:~$ cd /home/oclab/code/panda_robot
(base) oclab@panda1:~/code/panda_robot$ source /home/oclab/code/panda_robot/devel/setup.bash
(base) oclab@panda1:~/code/panda_robot$ ./franka.sh master

ROBOT: 172.16.0.2

[franka <Master> - [email protected]] (base) oclab@panda1:~/code/panda_robot$ roscore
... logging to /home/oclab/.ros/log/33ba5c80-52fe-11ec-8004-61c0d9261ce8/roslaunch-panda1-18263.log
Checking log directory for disk usage. This may take a while.
Press Ctrl-C to interrupt
Done checking log file disk usage. Usage is <1GB.

started roslaunch server http://172.16.0.1:39829/
ros_comm version 1.15.11


SUMMARY
========

PARAMETERS
 * /rosdistro: noetic
 * /rosversion: 1.15.11

NODES

auto-starting new master
process[master]: started with pid [18271]
ROS_MASTER_URI=http://172.16.0.1:11311/

setting /run_id to 33ba5c80-52fe-11ec-8004-61c0d9261ce8
process[rosout-1]: started with pid [18281]
started core service [/rosout]

@williamsnider
Copy link
Author

This is the output after restarting the pc and robot (seems to have gotten a little further than above).

(base) oclab@panda1:~/code/panda_robot$ cd /home/oclab/code/panda_robot
(base) oclab@panda1:~/code/panda_robot$ source /home/oclab/code/panda_robot/devel/setup.bash
(base) oclab@panda1:~/code/panda_robot$ ./franka.sh master

ROBOT: 172.16.0.2

[franka <Master> - [email protected]] (base) oclab@panda1:~/code/panda_robot$ roslaunch franka_interface interface.launch
... logging to /home/oclab/.ros/log/70944680-5393-11ec-88d6-cfaca2b630b9/roslaunch-panda1-6300.log
Checking log directory for disk usage. This may take a while.
Press Ctrl-C to interrupt
Done checking log file disk usage. Usage is <1GB.

xacro: in-order processing became default in ROS Melodic. You can drop the option.
started roslaunch server http://172.16.0.1:38563/

SUMMARY
========

PARAMETERS
 * /controllers_config/command_timeout: 0.2
 * /controllers_config/default_controller: position_joint_tr...
 * /controllers_config/impedance_controller: franka_ros_interf...
 * /controllers_config/position_controller: franka_ros_interf...
 * /controllers_config/torque_controller: franka_ros_interf...
 * /controllers_config/trajectory_controller: position_joint_tr...
 * /controllers_config/velocity_controller: franka_ros_interf...
 * /franka_control/publish_frequency: 1000
 * /franka_gripper/default_grasp_epsilon/inner: 0.005
 * /franka_gripper/default_grasp_epsilon/outer: 0.005
 * /franka_gripper/default_speed: 0.1
 * /franka_gripper/joint_names: ['panda_finger_jo...
 * /franka_gripper/publish_rate: 30
 * /franka_gripper/robot_ip: 172.16.0.2
 * /franka_gripper/stop_at_shutdown: False
 * /franka_ros_interface/custom_franka_state_controller/arm_id: panda
 * /franka_ros_interface/custom_franka_state_controller/joint_names: ['panda_joint1', ...
 * /franka_ros_interface/custom_franka_state_controller/publish_rate: 1000
 * /franka_ros_interface/custom_franka_state_controller/type: franka_interface/...
 * /franka_ros_interface/effort_joint_impedance_controller/arm_id: panda
 * /franka_ros_interface/effort_joint_impedance_controller/coriolis_factor: 1.0
 * /franka_ros_interface/effort_joint_impedance_controller/d_gains: [50.0, 50.0, 50.0...
 * /franka_ros_interface/effort_joint_impedance_controller/joint_names: ['panda_joint1', ...
 * /franka_ros_interface/effort_joint_impedance_controller/k_gains: [1200.0, 1000.0, ...
 * /franka_ros_interface/effort_joint_impedance_controller/publish_rate: 30.0
 * /franka_ros_interface/effort_joint_impedance_controller/type: franka_ros_contro...
 * /franka_ros_interface/effort_joint_position_controller/arm_id: panda
 * /franka_ros_interface/effort_joint_position_controller/d_gains: [50.0, 50.0, 50.0...
 * /franka_ros_interface/effort_joint_position_controller/joint_names: ['panda_joint1', ...
 * /franka_ros_interface/effort_joint_position_controller/k_gains: [1200.0, 1000.0, ...
 * /franka_ros_interface/effort_joint_position_controller/publish_rate: 30.0
 * /franka_ros_interface/effort_joint_position_controller/type: franka_ros_contro...
 * /franka_ros_interface/effort_joint_torque_controller/arm_id: panda
 * /franka_ros_interface/effort_joint_torque_controller/compensate_coriolis: False
 * /franka_ros_interface/effort_joint_torque_controller/joint_names: ['panda_joint1', ...
 * /franka_ros_interface/effort_joint_torque_controller/type: franka_ros_contro...
 * /franka_ros_interface/position_joint_position_controller/joint_names: ['panda_joint1', ...
 * /franka_ros_interface/position_joint_position_controller/type: franka_ros_contro...
 * /franka_ros_interface/velocity_joint_velocity_controller/joint_names: ['panda_joint1', ...
 * /franka_ros_interface/velocity_joint_velocity_controller/type: franka_ros_contro...
 * /gripper_config/default_grasp_epsilon/inner: 0.005
 * /gripper_config/default_grasp_epsilon/outer: 0.005
 * /gripper_config/default_speed: 0.1
 * /gripper_config/joint_names: ['panda_finger_jo...
 * /joint_state_desired_publisher/rate: 1000
 * /joint_state_desired_publisher/source_list: ['franka_ros_inte...
 * /joint_state_publisher/rate: 1000
 * /joint_state_publisher/source_list: ['franka_ros_inte...
 * /move_group/allow_trajectory_execution: True
 * /move_group/controller_list: [{'name': 'positi...
 * /move_group/hand/planner_configs: ['SBLkConfigDefau...
 * /move_group/jiggle_fraction: 0.05
 * /move_group/max_range: 5.0
 * /move_group/max_safe_path_cost: 1
 * /move_group/moveit_controller_manager: moveit_simple_con...
 * /move_group/moveit_manage_controllers: True
 * /move_group/octomap_frame: camera_rgb_optica...
 * /move_group/octomap_resolution: 0.05
 * /move_group/panda_arm/planner_configs: ['SBLkConfigDefau...
 * /move_group/panda_arm_hand/planner_configs: ['SBLkConfigDefau...
 * /move_group/planner_configs/BFMTkConfigDefault/balanced: 0
 * /move_group/planner_configs/BFMTkConfigDefault/cache_cc: 1
 * /move_group/planner_configs/BFMTkConfigDefault/extended_fmt: 1
 * /move_group/planner_configs/BFMTkConfigDefault/heuristics: 1
 * /move_group/planner_configs/BFMTkConfigDefault/nearest_k: 1
 * /move_group/planner_configs/BFMTkConfigDefault/num_samples: 1000
 * /move_group/planner_configs/BFMTkConfigDefault/optimality: 1
 * /move_group/planner_configs/BFMTkConfigDefault/radius_multiplier: 1.0
 * /move_group/planner_configs/BFMTkConfigDefault/type: geometric::BFMT
 * /move_group/planner_configs/BKPIECEkConfigDefault/border_fraction: 0.9
 * /move_group/planner_configs/BKPIECEkConfigDefault/failed_expansion_score_factor: 0.5
 * /move_group/planner_configs/BKPIECEkConfigDefault/min_valid_path_fraction: 0.5
 * /move_group/planner_configs/BKPIECEkConfigDefault/range: 0.0
 * /move_group/planner_configs/BKPIECEkConfigDefault/type: geometric::BKPIECE
 * /move_group/planner_configs/BiESTkConfigDefault/range: 0.0
 * /move_group/planner_configs/BiESTkConfigDefault/type: geometric::BiEST
 * /move_group/planner_configs/BiTRRTkConfigDefault/cost_threshold: 1e300
 * /move_group/planner_configs/BiTRRTkConfigDefault/frountier_node_ratio: 0.1
 * /move_group/planner_configs/BiTRRTkConfigDefault/frountier_threshold: 0.0
 * /move_group/planner_configs/BiTRRTkConfigDefault/init_temperature: 100
 * /move_group/planner_configs/BiTRRTkConfigDefault/range: 0.0
 * /move_group/planner_configs/BiTRRTkConfigDefault/temp_change_factor: 0.1
 * /move_group/planner_configs/BiTRRTkConfigDefault/type: geometric::BiTRRT
 * /move_group/planner_configs/ESTkConfigDefault/goal_bias: 0.05
 * /move_group/planner_configs/ESTkConfigDefault/range: 0.0
 * /move_group/planner_configs/ESTkConfigDefault/type: geometric::EST
 * /move_group/planner_configs/FMTkConfigDefault/cache_cc: 1
 * /move_group/planner_configs/FMTkConfigDefault/extended_fmt: 1
 * /move_group/planner_configs/FMTkConfigDefault/heuristics: 0
 * /move_group/planner_configs/FMTkConfigDefault/nearest_k: 1
 * /move_group/planner_configs/FMTkConfigDefault/num_samples: 1000
 * /move_group/planner_configs/FMTkConfigDefault/radius_multiplier: 1.1
 * /move_group/planner_configs/FMTkConfigDefault/type: geometric::FMT
 * /move_group/planner_configs/KPIECEkConfigDefault/border_fraction: 0.9
 * /move_group/planner_configs/KPIECEkConfigDefault/failed_expansion_score_factor: 0.5
 * /move_group/planner_configs/KPIECEkConfigDefault/goal_bias: 0.05
 * /move_group/planner_configs/KPIECEkConfigDefault/min_valid_path_fraction: 0.5
 * /move_group/planner_configs/KPIECEkConfigDefault/range: 0.0
 * /move_group/planner_configs/KPIECEkConfigDefault/type: geometric::KPIECE
 * /move_group/planner_configs/LBKPIECEkConfigDefault/border_fraction: 0.9
 * /move_group/planner_configs/LBKPIECEkConfigDefault/min_valid_path_fraction: 0.5
 * /move_group/planner_configs/LBKPIECEkConfigDefault/range: 0.0
 * /move_group/planner_configs/LBKPIECEkConfigDefault/type: geometric::LBKPIECE
 * /move_group/planner_configs/LBTRRTkConfigDefault/epsilon: 0.4
 * /move_group/planner_configs/LBTRRTkConfigDefault/goal_bias: 0.05
 * /move_group/planner_configs/LBTRRTkConfigDefault/range: 0.0
 * /move_group/planner_configs/LBTRRTkConfigDefault/type: geometric::LBTRRT
 * /move_group/planner_configs/LazyPRMkConfigDefault/range: 0.0
 * /move_group/planner_configs/LazyPRMkConfigDefault/type: geometric::LazyPRM
 * /move_group/planner_configs/LazyPRMstarkConfigDefault/type: geometric::LazyPR...
 * /move_group/planner_configs/PDSTkConfigDefault/type: geometric::PDST
 * /move_group/planner_configs/PRMkConfigDefault/max_nearest_neighbors: 10
 * /move_group/planner_configs/PRMkConfigDefault/type: geometric::PRM
 * /move_group/planner_configs/PRMstarkConfigDefault/type: geometric::PRMstar
 * /move_group/planner_configs/ProjESTkConfigDefault/goal_bias: 0.05
 * /move_group/planner_configs/ProjESTkConfigDefault/range: 0.0
 * /move_group/planner_configs/ProjESTkConfigDefault/type: geometric::ProjEST
 * /move_group/planner_configs/RRTConnectkConfigDefault/range: 0.0
 * /move_group/planner_configs/RRTConnectkConfigDefault/type: geometric::RRTCon...
 * /move_group/planner_configs/RRTkConfigDefault/goal_bias: 0.05
 * /move_group/planner_configs/RRTkConfigDefault/range: 0.0
 * /move_group/planner_configs/RRTkConfigDefault/type: geometric::RRT
 * /move_group/planner_configs/RRTstarkConfigDefault/delay_collision_checking: 1
 * /move_group/planner_configs/RRTstarkConfigDefault/goal_bias: 0.05
 * /move_group/planner_configs/RRTstarkConfigDefault/range: 0.0
 * /move_group/planner_configs/RRTstarkConfigDefault/type: geometric::RRTstar
 * /move_group/planner_configs/SBLkConfigDefault/range: 0.0
 * /move_group/planner_configs/SBLkConfigDefault/type: geometric::SBL
 * /move_group/planner_configs/SPARSkConfigDefault/dense_delta_fraction: 0.001
 * /move_group/planner_configs/SPARSkConfigDefault/max_failures: 1000
 * /move_group/planner_configs/SPARSkConfigDefault/sparse_delta_fraction: 0.25
 * /move_group/planner_configs/SPARSkConfigDefault/stretch_factor: 3.0
 * /move_group/planner_configs/SPARSkConfigDefault/type: geometric::SPARS
 * /move_group/planner_configs/SPARStwokConfigDefault/dense_delta_fraction: 0.001
 * /move_group/planner_configs/SPARStwokConfigDefault/max_failures: 5000
 * /move_group/planner_configs/SPARStwokConfigDefault/sparse_delta_fraction: 0.25
 * /move_group/planner_configs/SPARStwokConfigDefault/stretch_factor: 3.0
 * /move_group/planner_configs/SPARStwokConfigDefault/type: geometric::SPARStwo
 * /move_group/planner_configs/STRIDEkConfigDefault/degree: 16
 * /move_group/planner_configs/STRIDEkConfigDefault/estimated_dimension: 0.0
 * /move_group/planner_configs/STRIDEkConfigDefault/goal_bias: 0.05
 * /move_group/planner_configs/STRIDEkConfigDefault/max_degree: 18
 * /move_group/planner_configs/STRIDEkConfigDefault/max_pts_per_leaf: 6
 * /move_group/planner_configs/STRIDEkConfigDefault/min_degree: 12
 * /move_group/planner_configs/STRIDEkConfigDefault/min_valid_path_fraction: 0.2
 * /move_group/planner_configs/STRIDEkConfigDefault/range: 0.0
 * /move_group/planner_configs/STRIDEkConfigDefault/type: geometric::STRIDE
 * /move_group/planner_configs/STRIDEkConfigDefault/use_projected_distance: 0
 * /move_group/planner_configs/TRRTkConfigDefault/frountierNodeRatio: 0.1
 * /move_group/planner_configs/TRRTkConfigDefault/frountier_threshold: 0.0
 * /move_group/planner_configs/TRRTkConfigDefault/goal_bias: 0.05
 * /move_group/planner_configs/TRRTkConfigDefault/init_temperature: 10e-6
 * /move_group/planner_configs/TRRTkConfigDefault/k_constant: 0.0
 * /move_group/planner_configs/TRRTkConfigDefault/max_states_failed: 10
 * /move_group/planner_configs/TRRTkConfigDefault/min_temperature: 10e-10
 * /move_group/planner_configs/TRRTkConfigDefault/range: 0.0
 * /move_group/planner_configs/TRRTkConfigDefault/temp_change_factor: 2.0
 * /move_group/planner_configs/TRRTkConfigDefault/type: geometric::TRRT
 * /move_group/planner_configs/TrajOptDefault/type: geometric::TrajOpt
 * /move_group/planning_plugin: ompl_interface/OM...
 * /move_group/planning_scene_monitor/publish_geometry_updates: True
 * /move_group/planning_scene_monitor/publish_planning_scene: True
 * /move_group/planning_scene_monitor/publish_state_updates: True
 * /move_group/planning_scene_monitor/publish_transforms_updates: True
 * /move_group/request_adapters: default_planner_r...
 * /move_group/sensors: [{'sensor_plugin'...
 * /move_group/start_state_max_bounds_error: 0.1
 * /move_group/trajectory_execution/allowed_execution_duration_scaling: 1.2
 * /move_group/trajectory_execution/allowed_goal_duration_margin: 0.5
 * /move_group/trajectory_execution/allowed_start_tolerance: 0.01
 * /position_joint_trajectory_controller/constraints/goal_time: 0.5
 * /position_joint_trajectory_controller/constraints/panda_joint1/goal: 0.05
 * /position_joint_trajectory_controller/constraints/panda_joint2/goal: 0.05
 * /position_joint_trajectory_controller/constraints/panda_joint3/goal: 0.05
 * /position_joint_trajectory_controller/constraints/panda_joint4/goal: 0.05
 * /position_joint_trajectory_controller/constraints/panda_joint5/goal: 0.05
 * /position_joint_trajectory_controller/constraints/panda_joint6/goal: 0.05
 * /position_joint_trajectory_controller/constraints/panda_joint7/goal: 0.05
 * /position_joint_trajectory_controller/joints: ['panda_joint1', ...
 * /position_joint_trajectory_controller/type: position_controll...
 * /robot_config/arm_id: panda
 * /robot_config/collision_config/lower_force_thresholds_acceleration: [20.0, 20.0, 20.0...
 * /robot_config/collision_config/lower_force_thresholds_nominal: [20.0, 20.0, 20.0...
 * /robot_config/collision_config/lower_torque_thresholds_acceleration: [20.0, 20.0, 18.0...
 * /robot_config/collision_config/lower_torque_thresholds_nominal: [20.0, 20.0, 18.0...
 * /robot_config/collision_config/upper_force_thresholds_acceleration: [20.0, 20.0, 20.0...
 * /robot_config/collision_config/upper_force_thresholds_nominal: [20.0, 20.0, 20.0...
 * /robot_config/collision_config/upper_torque_thresholds_acceleration: [20.0, 20.0, 18.0...
 * /robot_config/collision_config/upper_torque_thresholds_nominal: [20.0, 20.0, 18.0...
 * /robot_config/cutoff_frequency: 100
 * /robot_config/internal_controller: joint_impedance
 * /robot_config/joint_config/joint_acceleration_limit/panda_joint1: 15.0
 * /robot_config/joint_config/joint_acceleration_limit/panda_joint2: 7.5
 * /robot_config/joint_config/joint_acceleration_limit/panda_joint3: 10.0
 * /robot_config/joint_config/joint_acceleration_limit/panda_joint4: 12.5
 * /robot_config/joint_config/joint_acceleration_limit/panda_joint5: 15.0
 * /robot_config/joint_config/joint_acceleration_limit/panda_joint6: 20.0
 * /robot_config/joint_config/joint_acceleration_limit/panda_joint7: 20.0
 * /robot_config/joint_config/joint_effort_limit/panda_joint1: 87
 * /robot_config/joint_config/joint_effort_limit/panda_joint2: 87
 * /robot_config/joint_config/joint_effort_limit/panda_joint3: 87
 * /robot_config/joint_config/joint_effort_limit/panda_joint4: 87
 * /robot_config/joint_config/joint_effort_limit/panda_joint5: 12
 * /robot_config/joint_config/joint_effort_limit/panda_joint6: 12
 * /robot_config/joint_config/joint_effort_limit/panda_joint7: 12
 * /robot_config/joint_config/joint_position_limit/lower/panda_joint1: -2.8973
 * /robot_config/joint_config/joint_position_limit/lower/panda_joint2: -1.7628
 * /robot_config/joint_config/joint_position_limit/lower/panda_joint3: -2.8973
 * /robot_config/joint_config/joint_position_limit/lower/panda_joint4: -3.0718
 * /robot_config/joint_config/joint_position_limit/lower/panda_joint5: -2.8973
 * /robot_config/joint_config/joint_position_limit/lower/panda_joint6: -0.0175
 * /robot_config/joint_config/joint_position_limit/lower/panda_joint7: -2.8973
 * /robot_config/joint_config/joint_position_limit/upper/panda_joint1: 2.8973
 * /robot_config/joint_config/joint_position_limit/upper/panda_joint2: 1.7628
 * /robot_config/joint_config/joint_position_limit/upper/panda_joint3: 2.8973
 * /robot_config/joint_config/joint_position_limit/upper/panda_joint4: -0.0698
 * /robot_config/joint_config/joint_position_limit/upper/panda_joint5: 2.8973
 * /robot_config/joint_config/joint_position_limit/upper/panda_joint6: 3.7525
 * /robot_config/joint_config/joint_position_limit/upper/panda_joint7: 2.8973
 * /robot_config/joint_config/joint_velocity_limit/panda_joint1: 2.175
 * /robot_config/joint_config/joint_velocity_limit/panda_joint2: 2.175
 * /robot_config/joint_config/joint_velocity_limit/panda_joint3: 2.175
 * /robot_config/joint_config/joint_velocity_limit/panda_joint4: 2.175
 * /robot_config/joint_config/joint_velocity_limit/panda_joint5: 2.61
 * /robot_config/joint_config/joint_velocity_limit/panda_joint6: 2.61
 * /robot_config/joint_config/joint_velocity_limit/panda_joint7: 2.61
 * /robot_config/joint_limit_warning_threshold: 0.1
 * /robot_config/joint_names: ['panda_joint1', ...
 * /robot_config/neutral_pose/panda_joint1: -0.01779206022777...
 * /robot_config/neutral_pose/panda_joint2: -0.7601235411041661
 * /robot_config/neutral_pose/panda_joint3: 0.019782607023391807
 * /robot_config/neutral_pose/panda_joint4: -2.342050140544315
 * /robot_config/neutral_pose/panda_joint5: 0.029840531355804868
 * /robot_config/neutral_pose/panda_joint6: 1.5411935298621688
 * /robot_config/neutral_pose/panda_joint7: 0.7534486589746342
 * /robot_config/rate_limiting: True
 * /robot_config/realtime_config: enforce
 * /robot_config/robot_ip: 172.16.0.2
 * /robot_description: <?xml version="1....
 * /robot_description_kinematics/panda_arm/kinematics_solver: kdl_kinematics_pl...
 * /robot_description_kinematics/panda_arm/kinematics_solver_search_resolution: 0.005
 * /robot_description_kinematics/panda_arm/kinematics_solver_timeout: 0.05
 * /robot_description_planning/joint_limits/panda_finger_joint1/has_acceleration_limits: False
 * /robot_description_planning/joint_limits/panda_finger_joint1/has_velocity_limits: True
 * /robot_description_planning/joint_limits/panda_finger_joint1/max_acceleration: 0
 * /robot_description_planning/joint_limits/panda_finger_joint1/max_velocity: 0.1
 * /robot_description_planning/joint_limits/panda_finger_joint2/has_acceleration_limits: False
 * /robot_description_planning/joint_limits/panda_finger_joint2/has_velocity_limits: True
 * /robot_description_planning/joint_limits/panda_finger_joint2/max_acceleration: 0
 * /robot_description_planning/joint_limits/panda_finger_joint2/max_velocity: 0.1
 * /robot_description_planning/joint_limits/panda_joint1/has_acceleration_limits: True
 * /robot_description_planning/joint_limits/panda_joint1/has_velocity_limits: True
 * /robot_description_planning/joint_limits/panda_joint1/max_acceleration: 3.75
 * /robot_description_planning/joint_limits/panda_joint1/max_velocity: 2.175
 * /robot_description_planning/joint_limits/panda_joint2/has_acceleration_limits: True
 * /robot_description_planning/joint_limits/panda_joint2/has_velocity_limits: True
 * /robot_description_planning/joint_limits/panda_joint2/max_acceleration: 1.875
 * /robot_description_planning/joint_limits/panda_joint2/max_velocity: 2.175
 * /robot_description_planning/joint_limits/panda_joint3/has_acceleration_limits: True
 * /robot_description_planning/joint_limits/panda_joint3/has_velocity_limits: True
 * /robot_description_planning/joint_limits/panda_joint3/max_acceleration: 2.5
 * /robot_description_planning/joint_limits/panda_joint3/max_velocity: 2.175
 * /robot_description_planning/joint_limits/panda_joint4/has_acceleration_limits: True
 * /robot_description_planning/joint_limits/panda_joint4/has_velocity_limits: True
 * /robot_description_planning/joint_limits/panda_joint4/max_acceleration: 3.125
 * /robot_description_planning/joint_limits/panda_joint4/max_velocity: 2.175
 * /robot_description_planning/joint_limits/panda_joint5/has_acceleration_limits: True
 * /robot_description_planning/joint_limits/panda_joint5/has_velocity_limits: True
 * /robot_description_planning/joint_limits/panda_joint5/max_acceleration: 3.75
 * /robot_description_planning/joint_limits/panda_joint5/max_velocity: 2.61
 * /robot_description_planning/joint_limits/panda_joint6/has_acceleration_limits: True
 * /robot_description_planning/joint_limits/panda_joint6/has_velocity_limits: True
 * /robot_description_planning/joint_limits/panda_joint6/max_acceleration: 5
 * /robot_description_planning/joint_limits/panda_joint6/max_velocity: 2.61
 * /robot_description_planning/joint_limits/panda_joint7/has_acceleration_limits: True
 * /robot_description_planning/joint_limits/panda_joint7/has_velocity_limits: True
 * /robot_description_planning/joint_limits/panda_joint7/max_acceleration: 5
 * /robot_description_planning/joint_limits/panda_joint7/max_velocity: 2.61
 * /robot_description_semantic: <?xml version="1....
 * /robot_state_publisher/publish_frequency: 1000
 * /rosdistro: noetic
 * /rosversion: 1.15.11

NODES
  /
    base_to_link0 (tf/static_transform_publisher)
    controllers (controller_manager/spawner)
    demo_scene_loader (franka_moveit/create_demo_planning_scene.py)
    franka_control (franka_interface/custom_franka_control_node)
    franka_gripper (franka_gripper/franka_gripper_node)
    joint_state_desired_publisher (joint_state_publisher/joint_state_publisher)
    joint_state_publisher (joint_state_publisher/joint_state_publisher)
    load_controllers (controller_manager/controller_manager)
    move_group (moveit_ros_move_group/move_group)
    robot_state_publisher (robot_state_publisher/robot_state_publisher)
    state_controller_spawner (controller_manager/spawner)
    world_to_base (tf/static_transform_publisher)

auto-starting new master
process[master]: started with pid [6373]
ROS_MASTER_URI=http://172.16.0.1:11311

setting /run_id to 70944680-5393-11ec-88d6-cfaca2b630b9
process[rosout-1]: started with pid [6384]
started core service [/rosout]
process[franka_gripper-2]: started with pid [6391]
process[franka_control-3]: started with pid [6392]
process[state_controller_spawner-4]: started with pid [6393]
process[robot_state_publisher-5]: started with pid [6394]
[ INFO] [1638465326.482597739]: franka_gripper_node: Found default_speed 0.1
process[joint_state_publisher-6]: started with pid [6399]
[ INFO] [1638465326.483102191]: franka_gripper_node: Found default_grasp_epsilon inner: 0.005, outer: 0.005
process[joint_state_desired_publisher-7]: started with pid [6406]
/home/oclab/code/panda_robot/devel/lib/franka_interface/custom_franka_control_node: Symbol `_ZTVN9franka_hw8FrankaHWE' has different size in shared object, consider re-linking
/home/oclab/code/panda_robot/devel/lib/franka_interface/custom_franka_control_node: symbol lookup error: /home/oclab/code/panda_robot/devel/lib/franka_interface/custom_franka_control_node: undefined symbol: _ZNK9franka_hw8FrankaHW7controlERKSt8functionIFbRKN3ros4TimeERKNS2_8DurationEEE
process[controllers-8]: started with pid [6408]
process[load_controllers-9]: started with pid [6410]
process[base_to_link0-10]: started with pid [6415]
process[world_to_base-11]: started with pid [6417]
process[move_group-12]: started with pid [6421]
process[demo_scene_loader-13]: started with pid [6423]
[ WARN] [1638465326.565270767]: MoveGroup launched without ~default_planning_pipeline specifying the namespace for the default planning pipeline configuration
[ WARN] [1638465326.565926217]: Falling back to using the the move_group node namespace (deprecated behavior).
[ INFO] [1638465326.571024238]: Loading robot model 'panda'...
[ WARN] [1638465326.571049738]: Skipping virtual joint 'virtual_joint' because its child frame 'panda_link0' does not match the URDF frame 'world'
[ INFO] [1638465326.571065518]: No root/virtual joint specified in SRDF. Assuming fixed joint
================================================================================REQUIRED process [franka_control-3] has died!
process has died [pid 6392, exit code 127, cmd /home/oclab/code/panda_robot/devel/lib/franka_interface/custom_franka_control_node __name:=franka_control __log:=/home/oclab/.ros/log/70944680-5393-11ec-88d6-cfaca2b630b9/franka_control-3.log].
log file: /home/oclab/.ros/log/70944680-5393-11ec-88d6-cfaca2b630b9/franka_control-3*.log
Initiating shutdown!
================================================================================
[ INFO] [1638465326.632937374]: Publishing maintained planning scene on 'monitored_planning_scene'
[ INFO] [1638465326.634151265]: Listening to 'joint_states' for joint states
[ INFO] [1638465326.636260843]: Listening to '/attached_collision_object' for attached collision objects
[ INFO] [1638465326.636283323]: Starting planning scene monitor
[ INFO] [1638465326.637286567]: Listening to '/planning_scene'
[ INFO] [1638465326.637306437]: Starting world geometry update monitor for collision objects, attached objects, octomap updates.
[ INFO] [1638465326.638096965]: Listening to '/collision_object'
[ INFO] [1638465326.638865393]: Listening to '/planning_scene_world' for planning scene world geometry
[ INFO] [1638465326.650222450]: Listening to '/camera/depth_registered/points' using message filter with target frame 'world '
[ INFO] [1638465326.650252209]: Loading planning pipeline ''
[demo_scene_loader-13] killing on exit
[move_group-12] killing on exit
[ INFO] [1638465326.682648857]: Using planning interface 'OMPL'
[world_to_base-11] killing on exit
Traceback (most recent call last):
  File "/home/oclab/code/panda_robot/devel/lib/franka_moveit/create_demo_planning_scene.py", line 15, in <module>
    exec(compile(fh.read(), python_script, 'exec'), context)
  File "/home/oclab/code/panda_robot/src/franka_ros_interface/franka_moveit/scripts/create_demo_planning_scene.py", line 30, in <module>
    import rospy
  File "/opt/ros/noetic/lib/python3/dist-packages/rospy/__init__.py", line 49, in <module>
[base_to_link0-10] killing on exit
    from .client import spin, myargv, init_node, \
  File "/opt/ros/noetic/lib/python3/dist-packages/rospy/client.py", line 39, in <module>
    import logging
  File "/home/oclab/anaconda3/lib/python3.8/logging/__init__.py", line 441, in <module>
[load_controllers-9] killing on exit
    class StrFormatStyle(PercentStyle):
  File "/home/oclab/anaconda3/lib/python3.8/logging/__init__.py", line 446, in StrFormatStyle
    fmt_spec = re.compile(r'^(.?[<>=^])?[+ -]?#?0?(\d+|{\w+})?[,_]?(\.(\d+|{\w+}))?[bcdefgnosx%]?$', re.I)
  File "/home/oclab/anaconda3/lib/python3.8/re.py", line 252, in compile
[controllers-8] killing on exit
    return _compile(pattern, flags)
  File "/home/oclab/anaconda3/lib/python3.8/re.py", line 292, in _compile
[joint_state_desired_publisher-7] killing on exit
    flags = flags.value
  File "/home/oclab/anaconda3/lib/python3.8/types.py", line 178, in __get__
[joint_state_publisher-6] killing on exit
    return self.fget(instance)
  File "/home/oclab/anaconda3/lib/python3.8/enum.py", line 751, in value
[robot_state_publisher-5] killing on exit
[state_controller_spawner-4] killing on exit
[ INFO] [1638465326.684641216]: Param 'default_workspace_bounds' was not set. Using default value: 10
    return self._value_
KeyboardInterrupt
[ INFO] [1638465326.684829273]: Param 'start_state_max_bounds_error' was set to 0.1
[ INFO] [1638465326.685014420]: Param 'start_state_max_dt' was not set. Using default value: 0.5
Traceback (most recent call last):
  File "/opt/ros/noetic/lib/controller_manager/controller_manager", line 5, in <module>
    import rospy, sys
  File "/opt/ros/noetic/lib/python3/dist-packages/rospy/__init__.py", line 49, in <module>
    from .client import spin, myargv, init_node, \
  File "/opt/ros/noetic/lib/python3/dist-packages/rospy/client.py", line 49, in <module>
[ INFO] [1638465326.685188947]: Param 'start_state_max_dt' was not set. Using default value: 0.5
    import rosgraph
  File "/opt/ros/noetic/lib/python3/dist-packages/rosgraph/__init__.py", line 36, in <module>
    from . masterapi import Master, MasterFailure, MasterError, MasterException
  File "/opt/ros/noetic/lib/python3/dist-packages/rosgraph/masterapi.py", line 45, in <module>
Traceback (most recent call last):
  File "/opt/ros/noetic/lib/controller_manager/spawner", line 38, in <module>
    from . names import make_caller_id
  File "/opt/ros/noetic/lib/python3/dist-packages/rosgraph/names.py", line 246, in <module>
    REMAP_PATTERN = re.compile(r'^([\~\/A-Za-z]|_|__)[\w\/]*' + REMAP + '.*')
  File "/home/oclab/anaconda3/lib/python3.8/re.py", line 252, in compile
    import rospy, sys
  File "/opt/ros/noetic/lib/python3/dist-packages/rospy/__init__.py", line 49, in <module>
Traceback (most recent call last):
  File "/opt/ros/noetic/lib/joint_state_publisher/joint_state_publisher", line 35, in <module>
[ INFO] [1638465326.685357254]: Param 'jiggle_fraction' was set to 0.05
    return _compile(pattern, flags)
  File "/home/oclab/anaconda3/lib/python3.8/re.py", line 304, in _compile
    from .client import spin, myargv, init_node, \
  File "/opt/ros/noetic/lib/python3/dist-packages/rospy/client.py", line 60, in <module>
Traceback (most recent call last):
  File "/opt/ros/noetic/lib/joint_state_publisher/joint_state_publisher", line 37, in <module>
    import rospy
  File "/opt/ros/noetic/lib/python3/dist-packages/rospy/__init__.py", line 49, in <module>
    p = sre_compile.compile(pattern, flags)
    from .client import spin, myargv, init_node, \
  File "/home/oclab/anaconda3/lib/python3.8/sre_compile.py", line 764, in compile
    import rospy.impl.init
  File "/opt/ros/noetic/lib/python3/dist-packages/rospy/client.py", line 49, in <module>
    import joint_state_publisher
  File "/opt/ros/noetic/lib/python3/dist-packages/rospy/impl/init.py", line 54, in <module>
Traceback (most recent call last):
  File "/opt/ros/noetic/lib/python3/dist-packages/joint_state_publisher/__init__.py", line 38, in <module>
  File "/opt/ros/noetic/lib/controller_manager/spawner", line 38, in <module>
    import rosgraph
[ INFO] [1638465326.685516812]: Param 'max_sampling_attempts' was not set. Using default value: 100
  File "/opt/ros/noetic/lib/python3/dist-packages/rosgraph/__init__.py", line 36, in <module>
    import sensor_msgs.msg
  File "/opt/ros/noetic/lib/python3/dist-packages/sensor_msgs/msg/__init__.py", line 8, in <module>
    from .tcpros import init_tcpros
  File "<frozen importlib._bootstrap>", line 991, in _find_and_load
[ INFO] [1638465326.685562001]: Using planning request adapter 'Add Time Parameterization'
    from . masterapi import Master, MasterFailure, MasterError, MasterException
    from ._Imu import *
    import rospy, sys
  File "/opt/ros/noetic/lib/python3/dist-packages/rosgraph/masterapi.py", line 47, in <module>
[ INFO] [1638465326.685583861]: Using planning request adapter 'Resolve constraint frames to robot links'
  File "/opt/ros/noetic/lib/python3/dist-packages/sensor_msgs/msg/_Imu.py", line 9, in <module>
  File "/opt/ros/noetic/lib/python3/dist-packages/rospy/__init__.py", line 49, in <module>
[ INFO] [1638465326.685609140]: Using planning request adapter 'Fix Workspace Bounds'
[ INFO] [1638465326.685622040]: Using planning request adapter 'Fix Start State Bounds'
[ INFO] [1638465326.685628820]: Using planning request adapter 'Fix Start State In Collision'
    from . network import parse_http_host_and_port
    import geometry_msgs.msg
  File "/opt/ros/noetic/lib/python3/dist-packages/rosgraph/network.py", line 51, in <module>
[ INFO] [1638465326.685635480]: Using planning request adapter 'Fix Start State Path Constraints'
  File "/opt/ros/noetic/lib/python3/dist-packages/geometry_msgs/msg/__init__.py", line 2, in <module>
    from .client import spin, myargv, init_node, \
  File "<frozen importlib._bootstrap>", line 971, in _find_and_load_unlocked
  File "/opt/ros/noetic/lib/python3/dist-packages/rospy/client.py", line 68, in <module>
    from ._AccelStamped import *
    from cStringIO import StringIO #Python 2.x
  File "<frozen importlib._bootstrap>", line 991, in _find_and_load
  File "<frozen importlib._bootstrap>", line 991, in _find_and_load
    p = sre_parse.parse(p, flags)
  File "/home/oclab/anaconda3/lib/python3.8/sre_parse.py", line 948, in parse
    from roscpp.srv import GetLoggers, GetLoggersResponse, SetLoggerLevel, SetLoggerLevelResponse
  File "<frozen importlib._bootstrap>", line 914, in _find_spec
  File "/opt/ros/noetic/lib/python3/dist-packages/roscpp/srv/__init__.py", line 3, in <module>
  File "<frozen importlib._bootstrap>", line 971, in _find_and_load_unlocked
  File "<frozen importlib._bootstrap>", line 971, in _find_and_load_unlocked
    from ._SetLoggerLevel import *
  File "<frozen importlib._bootstrap>", line 991, in _find_and_load
  File "<frozen importlib._bootstrap>", line 914, in _find_spec
  File "<frozen importlib._bootstrap>", line 914, in _find_spec
  File "<frozen importlib._bootstrap_external>", line 1342, in find_spec
  File "<frozen importlib._bootstrap_external>", line 1342, in find_spec
  File "<frozen importlib._bootstrap_external>", line 1342, in find_spec
  File "<frozen importlib._bootstrap>", line 971, in _find_and_load_unlocked
  File "<frozen importlib._bootstrap>", line 914, in _find_spec
  File "<frozen importlib._bootstrap_external>", line 1314, in _get_spec
  File "<frozen importlib._bootstrap_external>", line 1328, in _get_spec
  File "<frozen importlib._bootstrap_external>", line 1314, in _get_spec
  File "<frozen importlib._bootstrap_external>", line 1470, in find_spec
  File "<frozen importlib._bootstrap_external>", line 1342, in find_spec
KeyboardInterrupt
  File "<frozen importlib._bootstrap_external>", line 1428, in _get_spec
  File "<frozen importlib._bootstrap_external>", line 1453, in find_spec
  File "<frozen importlib._bootstrap_external>", line 1314, in _get_spec
  File "<frozen importlib._bootstrap_external>", line 661, in spec_from_file_location
    p = _parse_sub(source, state, flags & SRE_FLAG_VERBOSE, 0)
  File "/home/oclab/anaconda3/lib/python3.8/sre_parse.py", line 443, in _parse_sub
  File "<frozen importlib._bootstrap>", line 342, in __init__
  File "<frozen importlib._bootstrap_external>", line 1470, in find_spec
KeyboardInterrupt
KeyboardInterrupt
  File "<frozen importlib._bootstrap_external>", line 1428, in _get_spec
    itemsappend(_parse(source, state, verbose, nested + 1,
  File "/home/oclab/anaconda3/lib/python3.8/sre_parse.py", line 839, in _parse
  File "<frozen importlib._bootstrap_external>", line 661, in spec_from_file_location
KeyboardInterrupt
    state.closegroup(group, p)
  File "/home/oclab/anaconda3/lib/python3.8/sre_parse.py", line 97, in closegroup
    self.groupwidths[gid] = p.getwidth()
  File "/home/oclab/anaconda3/lib/python3.8/sre_parse.py", line 184, in getwidth
    l, h = av.getwidth()
  File "/home/oclab/anaconda3/lib/python3.8/sre_parse.py", line 221, in getwidth
    return self.width
KeyboardInterrupt
[franka_control-3] killing on exit
[franka_gripper-2] killing on exit
Loading 'move_group/ApplyPlanningSceneService'...
Loading 'move_group/ClearOctomapService'...
Loading 'move_group/MoveGroupCartesianPathService'...
Loading 'move_group/MoveGroupExecuteTrajectoryAction'...
Loading 'move_group/MoveGroupGetPlanningSceneService'...
Loading 'move_group/MoveGroupKinematicsService'...
Loading 'move_group/MoveGroupMoveAction'...
Loading 'move_group/MoveGroupPickPlaceAction'...
Loading 'move_group/MoveGroupPlanService'...
Loading 'move_group/MoveGroupQueryPlannersService'...
Loading 'move_group/MoveGroupStateValidationService'...

You can start planning now!

[rosout-1] killing on exit
[master] killing on exit
shutting down processing monitor...
... shutting down processing monitor complete
done

@williamsnider
Copy link
Author

Okay, I got to the bottom of this and as anticipated it's not something to do with this package, but I will list my solution regardless in case it helps someone else who is struggling.

I did a fresh install of linux / realtime patch / ros melodic / all dependencies. When running roslaunch franka_interface interface.launch, I got two exceptions: missing 'moveit_simple_controller_manager/MoveItSimpleControllerManager' and 'position_controllers/JointTrajectoryController'. I installed these by running sudo aptitude install ros-melodic-moveit-simple-controller-manager and sudo aptitude install ros-melodic-joint-trajectory-controller. I'm able to plan/execute movements with the robot in RVIZ now.

Sign up for free to subscribe to this conversation on GitHub. Already have an account? Sign in.
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
1 participant
@williamsnider