INNR Flows with Homey

[Sannervik]

Hey!

I use Homey with 15 INNR lamps. It is often that one or more do not follow the flow!
The lights usually works when I turn on / off each one separately, but it has never happened that all the lights in the flow have worked properly !?
Do you have any simple suggestions for solving this?
There are always different lamps that do not works in the flow so I have excluded that it is the lamp that is the problem! I also have three INNR smart plugs to amplify the signal in the house!

Homey Firmware Version: 2.0
INNR firmware: 1.1.7

What can I do to make it work?

Regards / Jerker

[kasteleman]

Hello, Not much i can do about it because Homey does not support Groups and Scenes. However, you can use a small time-out in the flow between the individual bulbs you want to switch. Or you can search the app store: there was a app for grouping devices. Btw the INNR bulbs itself are also routers and thus amplify the signal and are part of the zigbee mesh. Regards, Martin Op ma 21 jan. 2019 om 17:35 schreef Sannervik <[email protected]>

…

Hey! I use Homey with 15 INNR lamps. It is often that one or more do not follow the flow! The lights usually works when I turn on / off each one separately, but it has never happened that all the lights in the flow have worked properly !? Do you have any simple suggestions for solving this? There are always different lamps that do not works in the flow so I have excluded that it is the lamp that is the problem! I also have three INNR smart plugs to amplify the signal in the house! Homey Firmware Version: 2.0 INNR firmware: 1.1.7 What can I do to make it work? Regards / Jerker — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <#12>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AFpiKKFwBuy94niSeddnr6LAp5FhFeBMks5vFexIgaJpZM4aLKxA> .

[Sannervik]

Thank you for quick response! I'll try that! /Jerker Den mån 21 jan. 2019 17:42 skrev kasteleman <[email protected]>:

…

Hello, Not much i can do about it because Homey does not support Groups and Scenes. However, you can use a small time-out in the flow between the individual bulbs you want to switch. Or you can search the app store: there was a app for grouping devices. Btw the INNR bulbs itself are also routers and thus amplify the signal and are part of the zigbee mesh. Regards, Martin Op ma 21 jan. 2019 om 17:35 schreef Sannervik ***@***.***> > Hey! > > I use Homey with 15 INNR lamps. It is often that one or more do not follow > the flow! > The lights usually works when I turn on / off each one separately, but it > has never happened that all the lights in the flow have worked properly !? > Do you have any simple suggestions for solving this? > There are always different lamps that do not works in the flow so I have > excluded that it is the lamp that is the problem! I also have three INNR > smart plugs to amplify the signal in the house! > > Homey Firmware Version: 2.0 > INNR firmware: 1.1.7 > > What can I do to make it work? > > Regards / Jerker > > — > You are receiving this because you are subscribed to this thread. > Reply to this email directly, view it on GitHub > <#12>, or mute the thread > < https://github.com/notifications/unsubscribe-auth/AFpiKKFwBuy94niSeddnr6LAp5FhFeBMks5vFexIgaJpZM4aLKxA > > . > — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#12 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AsujGRXcutotOTnz_Pj5-A6_bpMJZv3fks5vFe3igaJpZM4aLKxA> .