ACD-DESC-MIB.mib

--
-- Accedian Enterprise Specific MIB
--
-- Copyright (c) 2005-2015, Accedian Networks, Inc.
-- All rights reserved.
--
-- The contents of this document is subject to change without notice.
--

ACD-DESC-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
    Integer32, Unsigned32, Gauge32
        FROM SNMPv2-SMI
    DisplayString, TruthValue, MacAddress
        FROM SNMPv2-TC
    MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
        FROM SNMPv2-CONF
    sysName
        FROM SNMPv2-MIB
    acdProducts
        FROM ACCEDIAN-SMI;

acdDesc MODULE-IDENTITY

    LAST-UPDATED "201512250100Z"
    ORGANIZATION "Accedian Networks, Inc."
    CONTACT-INFO
            "Accedian Technical Assistance Center
             Accedian Networks, Inc.
             2351 Alfred-Nobel blvd., Suite N-410
             Saint-Laurent, Quebec Canada H4S 2A9
             E-mail: support@accedian.com"
    DESCRIPTION
            "The Accedian Networks device Description MIB."

    REVISION "201512250100Z"        -- 25 Dec 2015
    DESCRIPTION
            "Added hardware options information."
	
    REVISION "201407020100Z"        -- 2 July 2014
    DESCRIPTION
            "Added system uptime in seconds."

    REVISION "201308100100Z"        -- 10 August 2013
    DESCRIPTION
            "Add label for Temperature sensors. Add note about LT 
             products truncating of values"

    REVISION "201011100100Z"        -- 10 November 2010
    DESCRIPTION
            "Fix compliance statement."

    REVISION "201006300100Z"        -- 30 june 2010
    DESCRIPTION
            "Revision for 10GE product introduction."

    REVISION "200902040100Z"        -- 4 Feb 2009
    DESCRIPTION
            "Add sysName in power lost (Dying gasp) notification."

    REVISION "200812010100Z"        -- 1 Dec 2008
    DESCRIPTION
            "Add power lost (Dying gasp) notification."

    REVISION "200608060100Z"        -- 6 Aug 2006
    DESCRIPTION
            "Initial version of MIB module ACD-DESC-MIB."

    ::= { acdProducts 1 }

acdDescNotifications    OBJECT IDENTIFIER ::= { acdDesc 0 }
acdDescMIBObjects       OBJECT IDENTIFIER ::= { acdDesc 15 }
acdDescConformance      OBJECT IDENTIFIER ::= { acdDescMIBObjects 1 }

---------------------------------------------------------------------------
 -- EtherNID General information
---------------------------------------------------------------------------

acdDescCommercialName  OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This string is to describe the type of device."
    ::= { acdDesc 1 }

acdDescMacBaseAddr OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This is the Base of the EtherNID MAC addresses."
    ::= { acdDesc 2 }

acdDescIdentifier  OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Identifies the EtherNID on your network."
    ::= { acdDesc 3 }

acdDescFirmwareVersion  OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the version of the firmware currently loaded."
    ::= { acdDesc 4 }

acdDescHardwareVersion  OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the assembly ID of the hardware."
    ::= { acdDesc 5 }

acdDescSerialNumber  OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the serial number."
    ::= { acdDesc 6 }

acdDescHardwareOptions  OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the Hardware options."
    ::= { acdDesc 7 }

acdDescCpuUsageCurrent  OBJECT-TYPE
    SYNTAX      Gauge32 (0..100)
    UNITS       "percent"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the current percentage of CPU usage."
    ::= { acdDesc 20 }

acdDescCpuUsageAverage15  OBJECT-TYPE
    SYNTAX      Gauge32 (0..100)
    UNITS       "percent"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the average percentage of CPU usage over the last 15 seconds.
         This object range from (0..100)."
    ::= { acdDesc 21 }

acdDescCpuUsageAverage30  OBJECT-TYPE
    SYNTAX      Gauge32 (0..100)
    UNITS       "percent"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the average percentage of CPU usage over the last 30 seconds.
         This object range from (0..100)."
    ::= { acdDesc 22 }

acdDescCpuUsageAverage60  OBJECT-TYPE
    SYNTAX      Gauge32 (0..100)
    UNITS       "percent"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the average percentage of CPU usage over the last 60 seconds.
         This object range from (0..100)."
    ::= { acdDesc 23 }

acdDescCpuUsageAverage900  OBJECT-TYPE
    SYNTAX      Gauge32 (0..100)
    UNITS       "percent"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the average percentage of CPU usage over the last 900
         seconds. This object range from (0..100)."
    ::= { acdDesc 24 }

acdDescUptime  OBJECT-TYPE
    SYNTAX      Unsigned32(1..4294967295)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION    
        "Number of seconds elapsed since boot."
    ::= { acdDesc 25 }

---------------------------------------------------------------------------
 -- The connector table
 -- This table contains all the information related to the connector.
---------------------------------------------------------------------------

acdDescConnectorTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF AcdDescConnectorEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "Table of all connectors info"
    ::= { acdDesc 10 }

acdDescConnectorEntry OBJECT-TYPE
    SYNTAX      AcdDescConnectorEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "This is the product connector definition."
    INDEX   { acdDescConnectorID }
    ::=  { acdDescConnectorTable 1 }


AcdDescConnectorEntry ::= SEQUENCE {
    acdDescConnectorID          Unsigned32,
    acdDescConnectorName        DisplayString,
    acdDescConnectorType        INTEGER,
    acdDescConnectorPoESupport  TruthValue
}

acdDescConnectorID  OBJECT-TYPE
    SYNTAX      Unsigned32(1..4294967295)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Unique value for each connector. Starting to one from left to right."
    ::= { acdDescConnectorEntry 1 }

acdDescConnectorName  OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Identifies the connector on the silkscreen."
    ::= { acdDescConnectorEntry 2 }

acdDescConnectorType  OBJECT-TYPE
    SYNTAX      INTEGER {
                    other(1),
                    rj45(2),
                    rj45S(3), -- rj45 shielded
                    db9(4),
                    bnc(5),
                    fAUI(6),  -- female aui
                    mAUI(7),  -- male aui
                    fiberSC(8),
                    fiberMIC(9),
                    fiberST(10),
                    telco(11),
                    mtrj(12),  -- fiber MT-RJ
                    hssdc(13), -- fiber channel style-2
                    fiberLC(14)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Describe the connector type, for instance an RJ-45 or an SFP."
    ::= { acdDescConnectorEntry 3 }

acdDescConnectorPoESupport  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This is to indicate if the port support PoE or not."
    ::= { acdDescConnectorEntry 4 }

---------------------------------------------------------------------------
 -- The Power Supply table
 -- This table contains all the information related to the Power supplies.
---------------------------------------------------------------------------

acdDescPwrTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF AcdDescPwrEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "Table of all Power Supplies"
    ::= { acdDesc 11 }

acdDescPwrEntry OBJECT-TYPE
    SYNTAX      AcdDescPwrEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "This is the product available power supplies information."
    INDEX   { acdDescPwrID }
    ::=  { acdDescPwrTable 1 }


AcdDescPwrEntry ::= SEQUENCE {
    acdDescPwrID                Unsigned32,
    acdDescPwrName              DisplayString,
    acdDescPwrType              INTEGER,
    acdDescPwrPresent           TruthValue
}

acdDescPwrID  OBJECT-TYPE
    SYNTAX      Unsigned32(1..4294967295)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Unique value for each power supply."
    ::= { acdDescPwrEntry 1 }

acdDescPwrName  OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS   current
    DESCRIPTION
        "Identifies the power supply."
    ::= { acdDescPwrEntry 2 }

acdDescPwrType  OBJECT-TYPE
    SYNTAX      INTEGER {
                    pwrplus5volts(1),
                    pwrminus48volts(2)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Describe the Power Supply type."
    ::= { acdDescPwrEntry 3 }

acdDescPwrPresent  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This is to indicate if the power supply is present or not."
    ::= { acdDescPwrEntry 4 }

---------------------------------------------------------------------------
 -- The Temperature sensor table
 -- This table contains all the information for the Temperature sensors.
---------------------------------------------------------------------------

acdDescTsTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF AcdDescTsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "Table of all Teperature Sensors."
    ::= { acdDesc 12 }

acdDescTsEntry OBJECT-TYPE
    SYNTAX      AcdDescTsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
            "This is the product available Temperature sensor information."
    INDEX   { acdDescTsID }
    ::=  { acdDescTsTable 1 }


AcdDescTsEntry ::= SEQUENCE {
    acdDescTsID                 Unsigned32,
    acdDescTsCurrentTemp        Integer32,
    acdDescTsFirstThres         Integer32,
    acdDescTsFisrtThresPass     TruthValue,
    acdDescTsSecondThres        Integer32,
    acdDescTsSecondThresPass    TruthValue,
    acdDescTsLabel              DisplayString
}

acdDescTsID  OBJECT-TYPE
    SYNTAX      Unsigned32(1..4294967295)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION    
        "Unique value for each Temperature Sensor."
    ::= { acdDescTsEntry 1 }

acdDescTsCurrentTemp  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Current temperature in Celsius around the temperature sensor.
         On LT and LT-S units this value is truncated and does not
         include the decimals."
    ::= { acdDescTsEntry 2 }

acdDescTsFirstThres  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Temperature value in Celsius to declare this threshold crossed.
         On LT and LT-S units this value is truncated and does not
         include the decimals."
    ::= { acdDescTsEntry 3 }

acdDescTsFisrtThresPass  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This is to indicate if the temperature cross the first threshold."
    ::= { acdDescTsEntry 4 }

acdDescTsSecondThres  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Temperature value in Celsius to declare this second threshold crossed.
         On LT and LT-S units this value is truncated and does not
         include the decimals."
   ::= { acdDescTsEntry 5 }

acdDescTsSecondThresPass  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This is to indicate if the temperature cross the second threshold."
    ::= { acdDescTsEntry 6 }

acdDescTsLabel  OBJECT-TYPE
    SYNTAX      DisplayString(SIZE(1..63))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Label of the temperature sensor."
    ::= { acdDescTsEntry 7 }

-- ****************************************************************************
-- NOTIFICATIONS (TRAPS)
-- ****************************************************************************

acdPowerLost NOTIFICATION-TYPE
    OBJECTS  {  acdDescCommercialName,
                acdDescMacBaseAddr,
                acdDescIdentifier,
                acdDescSerialNumber,
                sysName }
    STATUS      current
    DESCRIPTION
        "The SNMP trap that is generated by a unit when it detect a power lost.
         It's the equivalent of the 802.3ah dying gasp."

    ::= { acdDescNotifications 1 }


---------------------------------------------------------------------------
 -- ACD-DESC-MIB Module - Conformance Information
---------------------------------------------------------------------------

acdDescCompliances  OBJECT IDENTIFIER ::= { acdDescConformance 1 }
acdDescGroups       OBJECT IDENTIFIER ::= { acdDescConformance 2 }

---------------------------------------------------------------------------
-- Units of conformance
---------------------------------------------------------------------------

acdDescGenGroup OBJECT-GROUP
    OBJECTS {
        acdDescCommercialName,
        acdDescMacBaseAddr,
        acdDescIdentifier,
        acdDescFirmwareVersion,
        acdDescHardwareVersion,
        acdDescSerialNumber,
        acdDescHardwareOptions,
        acdDescCpuUsageCurrent,
        acdDescCpuUsageAverage15,
        acdDescCpuUsageAverage30,
        acdDescCpuUsageAverage60,
        acdDescCpuUsageAverage900,
        acdDescUptime
    }
    STATUS      current
    DESCRIPTION
       "."
    ::= { acdDescGroups 1 }

acdDescConnectorGroup OBJECT-GROUP
    OBJECTS {
        acdDescConnectorName,
        acdDescConnectorType,
        acdDescConnectorPoESupport
    }
    STATUS      current
    DESCRIPTION
       "."
    ::= { acdDescGroups 2 }

acdDescPwrGroup OBJECT-GROUP
    OBJECTS {
        acdDescPwrName,
        acdDescPwrType,
        acdDescPwrPresent
    }
    STATUS      current
    DESCRIPTION
       "."
    ::= { acdDescGroups 3 }

acdDescTsGroup OBJECT-GROUP
    OBJECTS {
        acdDescTsCurrentTemp,
        acdDescTsFirstThres,
        acdDescTsFisrtThresPass,
        acdDescTsSecondThres,
        acdDescTsSecondThresPass,
        acdDescTsLabel
    }
    STATUS      current
    DESCRIPTION
       "."
    ::= { acdDescGroups 4 }

acdDescNotificationsGroup NOTIFICATION-GROUP
    NOTIFICATIONS {
        acdPowerLost
    }
    STATUS      current
    DESCRIPTION
       "Objects for the Notifications group."
    ::= { acdDescGroups 5 }

---------------------------------------------------------------------------
-- MIB Module Compliance statements
---------------------------------------------------------------------------
acdDescCompliance MODULE-COMPLIANCE
    STATUS      current
    DESCRIPTION
       "The compliance statement for support of the ACD-DESC-MIB module."
    MODULE
        MANDATORY-GROUPS {
            acdDescGenGroup,
            acdDescConnectorGroup,
            acdDescPwrGroup,
            acdDescTsGroup,
            acdDescNotificationsGroup
        }

    ::= { acdDescCompliances 1 }

END