Skip to content

Latest commit

 

History

History
98 lines (70 loc) · 5.9 KB

README.md

File metadata and controls

98 lines (70 loc) · 5.9 KB
Raw

robile_description

Robot description for the KELO ROBILE's in form of URDF files and meshes

Available KELO ROBILE bricks

The following ROBILE bricks are made available as xacro macro's. To reduce the computational load during simulation and to protect proprietary design, the meshes provided in this package are an approximation of the real hardware. The bricks are defined in the urdf/robile_bricks directory.

ROBILE brick Purpose
robile_active_wheel_brick A ROBILE brick with an active KELO Drive attached to it.
robile_passive_wheel_brick A ROBILE brick with a passive caster wheel attached to it.
robile_master_battery_brick A mockup of a ROBILE brick with a master battery
robile_cpu_brick A mockup of a ROBILE brick with an onboard CPU
robile_empty_brick A mockup of a full-sized empty ROBILE brick

TUTORIAL: Building a custom ROBILE platform configuration

The above ROBILE bricks can be used to construct customized platform's. We describe the procedure to build a new platform with a simple example. Lets assume we want to build a new platform with the name simple_config. This platform consists of two active wheels and two passive wheels with the following arrangement. For simplicity, lets assume we do not include any CPU or master_battery bricks in the platform.
Simple config arrangement

Step-1: Define a new robot

  1. Since we want to name our platform simple_config, we create a file simple_config.urdf.xacro in the robots/ directory.
  2. We then add the following block of code to define the new robot platform 
    <?xml version='1.0'?>
<robot xmlns:xacro="http://ros.org/wiki/xacro" name="simple_config" >

    <xacro:arg name="movable_joints" default="true"/>

    <!-- Include desired robile bricks -->
    <xacro:include filename="$(find robile_description)/urdf/robile_bricks/robile_active_wheel_brick.urdf.xacro" />
    <xacro:include filename="$(find robile_description)/urdf/robile_bricks/robile_passive_wheel_brick.urdf.xacro" />

    <link name="base_link"/>

</robot>
    Since our platform will only consists of active and passive ROBILE bricks, we only include the robile_active_wheel_brick and robile_passive_wheel_brick xacro files.

Step-2: Add ROBILE bricks to the new robot

We shall use the center of the robot as the base_link and hence, as shown in the figure, each ROBILE brick center will be at +/- 0.1165m from the base_link, depending on the position of each brick.

Therefore we instantiate the ROBILE bricks as follows. We can use arbitrary names for each ROBILE brick, but in this example, we name each brick as robile_'n'. The origin for each ROBILE brick is specified w.r.t. the base_link.

<!-- Build platform using robile bricks -->
<xacro:robile_passive_wheel_brick name="robile_1" parent="base_link" movable_joints="$(arg movable_joints)">
    <origin xyz="0.1165 0.1165 0.05" rpy="0.0 0.0 0.0"/>
</xacro:robile_passive_wheel_brick>

<xacro:robile_passive_wheel_brick name="robile_2" parent="base_link" movable_joints="$(arg movable_joints)">
    <origin xyz="0.1165 -0.1165 0.05" rpy="0.0 0.0 0.0"/>
</xacro:robile_passive_wheel_brick>

<xacro:robile_active_wheel_brick name="robile_3" parent="base_link" movable_joints="$(arg movable_joints)">
    <origin xyz="-0.1165 -0.1165 0.05" rpy="0.0 0.0 0.0"/>
</xacro:robile_active_wheel_brick>

<xacro:robile_active_wheel_brick name="robile_4" parent="base_link" movable_joints="$(arg movable_joints)">
    <origin xyz="-0.1165 0.1165 0.05" rpy="0.0 0.0 0.0"/>
</xacro:robile_active_wheel_brick>

The complete platform config file

The complete platform configuration file robots/simple_config.urdf.xacro would look as follows:

<?xml version='1.0'?>
<robot xmlns:xacro="http://ros.org/wiki/xacro" name="simple_config" >

    <xacro:arg name="movable_joints" default="true"/>

    <!-- Include desired robile bricks -->
    <xacro:include filename="$(find robile_description)/urdf/robile_bricks/robile_active_wheel_brick.urdf.xacro" />
    <xacro:include filename="$(find robile_description)/urdf/robile_bricks/robile_passive_wheel_brick.urdf.xacro" />

    <link name="base_link"/>

    <!-- Build platform using robile bricks -->
    <xacro:robile_passive_wheel_brick name="robile_1" parent="base_link" movable_joints="$(arg movable_joints)">
        <origin xyz="0.1165 0.1165 0.05" rpy="0.0 0.0 0.0"/>
    </xacro:robile_passive_wheel_brick>

    <xacro:robile_passive_wheel_brick name="robile_2" parent="base_link" movable_joints="$(arg movable_joints)">
        <origin xyz="0.1165 -0.1165 0.05" rpy="0.0 0.0 0.0"/>
    </xacro:robile_passive_wheel_brick>

    <xacro:robile_active_wheel_brick name="robile_3" parent="base_link" movable_joints="$(arg movable_joints)">
        <origin xyz="-0.1165 -0.1165 0.05" rpy="0.0 0.0 0.0"/>
    </xacro:robile_active_wheel_brick>

    <xacro:robile_active_wheel_brick name="robile_4" parent="base_link" movable_joints="$(arg movable_joints)">
        <origin xyz="-0.1165 0.1165 0.05" rpy="0.0 0.0 0.0"/>
    </xacro:robile_active_wheel_brick>

</robot>