relays.bas

    2 rem Relays control program in bwbasic 3.2   4-18-2020 Ken.
    3 rem 4-18-2020 Added hardware check. Error traps and help.
    5 rem As of 4-13-2020 Debian apt get install bwbasic installs an old 2.2.
    6 rem Assumes bwbasic 3.2. bwbasic 2.2 has issues see changelog.
    7 rem Download bwbasic-3.2a.tar file. Untar then cd bwbasic-3.2a then sh compile
    8 rem Set terminal to ANSI mode. Linux and Windows. Only 3.2 or newer
    9 rem   option terminal ANSI
   11 call cls : rem Clear screen on initial startup. Only 3.2 or newer
   12 call close : rem Close any open files. Again 3.2 or newer.
   13 rem Trap errors
   14 on error gosub 10000
   15 gosub 9000 : rem Get Dogtag & Model & see if it's allowable hardware.
   16 print : print "=== Relay games on ";DATE$;" at ";TIME$;" ===" : print " ";d$
   17 print "        ";o$
   18 print
   24 rem b$ = Base address as of Beaglebone Black Debian 10.3 3-26-2020
   25 let b$="/sys/class/gpio/gpio"
   50 print "0 Off, 1 On, s State, sa State All,";
   52 print " ao All Off, l Label, h for Help or x Exit "; : input m$
   60 IF m$ = "0" or m$ = "1" or m$ = "l" or m$ = "s" then goto 70
   63 IF m$ = "x" or m$ = "e" then system : rem   Stop program. Exit to system.
   64 IF m$ = "sa" then print:print "Currently:":gosub 500:goto 16 : rem State all
   65 IF m$ = "ao" then print:print "Was:":gosub 500:print "Now:":gosub 600:goto 16
   66 IF m$ = "q"  then print "Bye" : stop : rem   Stop program
   67 IF m$ = "h"  then gosub 1000 : goto 16
   68 print "Mode error. Only 0, 1, s, l, ao All Off, sa State All ";
   69 print "h Help or x allowed" : goto 50
   70 print "Relay # = gpio: 1 = 20, 2 = 7, 3 = 112, 4 = 115 or r to Return. ";
   71 input "Enter gpio # ";s$
   75 IF s$ = "20" or s$ = "7" or s$ = "112" or s$ = "115" then goto 80
   76 IF s$ = "r" then goto 16 : rem Start over
   78 print "Relay gpio number error. Only 20, 7, 112, 115 or r" : goto 70
   80 print
   82 IF m$ = "l" then gosub 400 : goto 16 :         rem     l = Label
   84 IF m$ = "s" then gosub 300 : print : goto 16 : rem     s = State
   86 IF m$ = "0" or m$ = "1" then gosub 100 : goto 16 : rem Change Relay state
   90 print : print "Error. Code fall through at line 90" : print : stop
  100 rem Change state of a Relay.
  101 rem p$ = Complete address to gpio. b$ is the Base + gpio# + end of string
  102 let p$=b$ + s$ + "/value"
  110 call open("O",#1,p$) : rem Open for Output and write m$
  150 print #1,m$ : rem          Print to gpio string m$
  160 call close(#1)
  210 call open("I",#1,p$) : rem  Open for Input
  250 read #1,x : rem             Read numeric result
  255 call close(#1)
  256 IF s$ = "20"  then print "#1 ";
  257 IF s$ = "7"   then print "#2 ";
  258 IF s$ = "112" then print "#3 ";
  259 IF s$ = "115" then print "#4 ";
  260 gosub 700
  299 return
  300 rem p$ = Complete address to gpio. b$ is the Base + gpio# + end of string
  304 let p$=b$ + s$ + "/value"
  310 call open("I",#1,p$) : rem Open for Input
  350 read #1,x : rem            Read numeric result
  355 call close(#1)
  360 gosub 700
  396 return : rem Start over
  400 rem p$ = Complete address to gpio. b$ is the Base + gpio# + end of string
  404 let p$=b$ + s$ + "/label"
  410 call open("I",#1,p$)
  420 read #1,l$
  425 call close(#1)
  430 print "Label for gpio ";s$;" is ";l$
  440 return
  500 rem Display the state of all Relays 'sa'
  510 let s$ = "20" :  print "#1 "; : gosub 300
  520 let s$ = "7"   : print "#2 "; : gosub 300
  530 let s$ = "112" : print "#3 "; : gosub 300
  540 let s$ = "115" : print "#4 "; : gosub 300
  550 return
  600 rem Turn all Relays off 'ao'
  612 let m$ = "0"   : rem Set mode to '0' off
  620 let s$ = "20"  : gosub 100
  624 let s$ = "7"   : gosub 100
  626 let s$ = "112" : gosub 100
  628 let s$ = "115" : gosub 100
  630 return
  700 rem Print relay state gathered from 'read'
  704 print "Relay gpio ";s$," state is now = ";x;
  770 IF x = 0 then print " Off"
  780 IF x = 1 then print " On"
  790 IF x > 1 or x < 0 then print " Error"
  799 return
 1000 rem Give them some help
 1010 print:print "Information" : print
 1020 print "To change the state of a relay use 0 for Off or 1 for On"
 1022 print "   Then enter the gpio number 20, 7, 112 or 115":print
 1024 print "To check the state of a single relay use s"
 1026 print "   Then enter the gpio number":print
 1028 print "To get the associated label (header pin) use l"
 1030 print "   Then enter the gpio number":print
 1032 print "To get the state of all relays use sa": print
 1034 print "To turn all relays off use ao":print
 1035 print "For the latest updates goto:"
 1036 print "https://github.com/kenmartin-unix/Bwbasic-3.2a-for-BeagleBone"
 1040 print : input "Press enter ? ",h
 1099 return
 9000 rem  Get Model & Dogtag d$ = Dogtag 0$ = MOdel. Check for Beaglebone 'Black'
 9002 rem If we fail here we should not. This only runs once at startup.
 9004 call open("I",#1,"/etc/dogtag") : rem             Open dogtag file
 9008 read #1,d$ : call close(#1)
 9014 call open("I",#1,"/proc/device-tree/model") : rem Open model info
 9018 read #1,o$ : call close(#1)
 9020 rem Lets see if it's a 'Black'
 9025 IF (instr(1,o$,"Black") > 0) then return
 9055 print : print "Warning: It appears this is not a BeagleBone 'Black'" : print
 9056 print "It appears to be : ";o$
 9057 print "Running : ";d$ 
 9058 system
10000 rem Trap errors here. Hopefuly you will not get here.
10020 print : print "Error code ";err;" Error line ";erl
10040 print
10041 IF (err = 2)   then print "A program syntax error." : print : system
10042 IF (err = 5)   then print "Trouble working with files." : print :system 
10043 IF (erl > 9000) then print "Trouble during initial setup." : print : system:
10044 IF (err = 62)  then print "Reading past the end of file attempted." : print
10048 IF (err = 64)  then print "Invalid path. Verify open paths." : system
10060 rem CLOSE will fail on 2.2 and loop but not 3.2+
10070 call close : rem Just in case something is open.
11100 system : rem Stop program