Argument_Simple.ino

/****************************************************************************************************************************
  Argument_Simple.ino
  For Arduino and Adadruit AVR 328(P) and 32u4 boards
  Written by Khoi Hoang

  Built by Khoi Hoang https://github.com/khoih-prog/TimerInterrupt
  Licensed under MIT license

  Now we can use these new 16 ISR-based timers, while consuming only 1 hardware Timer.
  Their independently-selected, maximum interval is practically unlimited (limited only by unsigned long miliseconds)
  The accuracy is nearly perfect compared to software timers. The most important feature is they're ISR-based timers
  Therefore, their executions are not blocked by bad-behaving functions / tasks.
  This important feature is absolutely necessary for mission-critical tasks.

  Notes:
  Special design is necessary to share data between interrupt code and the rest of your program.
  Variables usually need to be "volatile" types. Volatile tells the compiler to avoid optimizations that assume
  variable can not spontaneously change. Because your function may change variables while your program is using them,
  the compiler needs this hint. But volatile alone is often not enough.
  When accessing shared variables, usually interrupts must be disabled. Even with volatile,
  if the interrupt changes a multi-byte variable between a sequence of instructions, it can be read incorrectly.
  If your data is multiple variables, such as an array and a count, usually interrupts need to be disabled
  or the entire sequence of your code which accesses the data.
 *****************************************************************************************************************************/

// These define's must be placed at the beginning before #include "TimerInterrupt.h"
// _TIMERINTERRUPT_LOGLEVEL_ from 0 to 4
// Don't define _TIMERINTERRUPT_LOGLEVEL_ > 0. Only for special ISR debugging only. Can hang the system.
#define TIMER_INTERRUPT_DEBUG         0
#define _TIMERINTERRUPT_LOGLEVEL_     0

#define USE_TIMER_1     true

#if ( defined(__AVR_ATmega644__) || defined(__AVR_ATmega644A__) || defined(__AVR_ATmega644P__) || defined(__AVR_ATmega644PA__)  || \
        defined(ARDUINO_AVR_UNO) || defined(ARDUINO_AVR_NANO) || defined(ARDUINO_AVR_MINI) ||    defined(ARDUINO_AVR_ETHERNET) || \
        defined(ARDUINO_AVR_FIO) || defined(ARDUINO_AVR_BT)   || defined(ARDUINO_AVR_LILYPAD) || defined(ARDUINO_AVR_PRO)      || \
        defined(ARDUINO_AVR_NG) || defined(ARDUINO_AVR_UNO_WIFI_DEV_ED) || defined(ARDUINO_AVR_DUEMILANOVE) || defined(ARDUINO_AVR_FEATHER328P) || \
        defined(ARDUINO_AVR_METRO) || defined(ARDUINO_AVR_PROTRINKET5) || defined(ARDUINO_AVR_PROTRINKET3) || defined(ARDUINO_AVR_PROTRINKET5FTDI) || \
        defined(ARDUINO_AVR_PROTRINKET3FTDI) )
#define USE_TIMER_2     true
#warning Using Timer1
#else
#define USE_TIMER_3     true
#warning Using Timer3
#endif

#include "TimerInterrupt_Generic.h"

#if !defined(LED_BUILTIN)
	#define LED_BUILTIN     13
#endif

unsigned int outputPin1 = LED_BUILTIN;
unsigned int outputPin  = A0;

#define TIMER1_INTERVAL_MS    1000

void TimerHandler1(unsigned int outputPin = LED_BUILTIN)
{
	static bool toggle1 = false;
	static bool started = false;

	if (!started)
	{
		started = true;
		pinMode(outputPin, OUTPUT);
	}

#if (TIMER_INTERRUPT_DEBUG > 1)
	//timer interrupt toggles pin outputPin, default LED_BUILTIN
	Serial.print("pin1 = ");
	Serial.print(outputPin);
	Serial.print(" address: ");
	Serial.println((uint32_t) &outputPin );
#endif

	digitalWrite(outputPin, toggle1);
	toggle1 = !toggle1;
}

#define TIMER_INTERVAL_MS    2000

void TimerHandler(unsigned int outputPin = LED_BUILTIN)
{
	static bool toggle = false;
	static bool started = false;

	if (!started)
	{
		started = true;
		pinMode(outputPin, OUTPUT);
	}

	//timer interrupt toggles pin outputPin, default LED_BUILTIN
	digitalWrite(outputPin, toggle);
	toggle = !toggle;
}

void setup()
{
	Serial.begin(115200);

	while (!Serial && millis() < 5000);

  delay(500);

	Serial.print(F("\nStarting Argument_Simple on "));
	Serial.println(BOARD_TYPE);
	Serial.println(TIMER_INTERRUPT_VERSION);
	Serial.println(TIMER_INTERRUPT_GENERIC_VERSION);
	Serial.print(F("CPU Frequency = "));
	Serial.print(F_CPU / 1000000);
	Serial.println(F(" MHz"));

	// Timer0 is used for micros(), millis(), delay(), etc and can't be used
	// Select Timer 1-2 for UNO, 1-5 for MEGA, 1,3,4 for 16u4/32u4
	// Timer 2 is 8-bit timer, only for higher frequency
	// Timer 4 of 16u4 and 32u4 is 8/10-bit timer, only for higher frequency

	ITimer1.init();

	// Using ATmega328 used in UNO => 16MHz CPU clock ,
	// For 16-bit timer 1, 3, 4 and 5, set frequency from 0.2385 to some KHz
	// For 8-bit timer 2 (prescaler up to 1024, set frequency from 61.5Hz to some KHz

	if (ITimer1.attachInterruptInterval(TIMER1_INTERVAL_MS, TimerHandler1, outputPin1))
	{
		Serial.print(F("Starting  ITimer1 OK, millis() = "));
		Serial.println(millis());

#if (TIMER_INTERRUPT_DEBUG > 1)
		Serial.print(F("OutputPin1 = "));
		Serial.print(outputPin1);
		Serial.print(F(" address: "));
		Serial.println((uint32_t) &outputPin1 );
#endif
	}
	else
		Serial.println(F("Can't set ITimer1. Select another freq. or timer"));

#if USE_TIMER_2

	ITimer2.init();

	if (ITimer2.attachInterruptInterval(TIMER_INTERVAL_MS, TimerHandler, outputPin))
	{
		Serial.print(F("Starting  ITimer2 OK, millis() = "));
		Serial.println(millis());

#if (TIMER_INTERRUPT_DEBUG > 1)
		Serial.print(F("OutputPin = "));
		Serial.print(outputPin);
		Serial.print(F(" address: "));
		Serial.println((uint32_t) &outputPin );
#endif
	}
	else
		Serial.println(F("Can't set ITimer2. Select another freq. or timer"));

#elif USE_TIMER_3

	ITimer3.init();

	if (ITimer3.attachInterruptInterval(TIMER_INTERVAL_MS, TimerHandler, outputPin))
	{
		Serial.print(F("Starting  ITimer3 OK, millis() = "));
		Serial.println(millis());

#if (TIMER_INTERRUPT_DEBUG > 1)
		Serial.print(F("OutputPin = "));
		Serial.print(outputPin);
		Serial.print(F(" address: "));
		Serial.println((uint32_t) &outputPin );
#endif
	}
	else
		Serial.println(F("Can't set ITimer3. Select another freq. or timer"));

#endif
}

void loop()
{
}