acl-hlt2011.sty

% File acl-hlt2011.sty
% October 11, 2004
% Contact: oflazer@sabanciuniv.edu

% This is the LaTeX style file for ACL 2005.  It is nearly identical to the
% style files for ACL 2002, ACL 2001, ACL 2000, EACL 95 and EACL
% 99. 
%
% This is the LaTeX style file for ACL 2000.  It is nearly identical to the
% style files for EACL 95 and EACL 99.  Minor changes include editing the
% instructions to reflect use of \documentclass rather than \documentstyle
% and removing the white space before the title on the first page
% -- John Chen, June 29, 2000

% To convert from submissions prepared using the style file aclsub.sty
% prepared for the ACL 2000 conference, proceed as follows:
% 1) Remove submission-specific information:  \whichsession, \id,
%    \wordcount, \otherconferences, \area, \keywords
% 2) \summary should be removed.  The summary material should come
%     after \maketitle and should be in the ``abstract'' environment
% 3) Check all citations.  This style should handle citations correctly
%    and also allows multiple citations separated by semicolons.
% 4) Check figures and examples.  Because the final format is double-
%    column, some adjustments may have to be made to fit text in the column
%    or to choose full-width (\figure*} figures.
% 5) Change the style reference from aclsub to acl2000, and be sure
%    this style file is in your TeX search path


% This is the LaTeX style file for EACL-95.  It is identical to the
% style file for ANLP '94 except that the margins are adjusted for A4
% paper.  -- abney 13 Dec 94

% The ANLP '94 style file is a slightly modified
% version of the style used for AAAI and IJCAI, using some changes
% prepared by Fernando Pereira and others and some minor changes 
% by Paul Jacobs.

% Papers prepared using the aclsub.sty file and acl.bst bibtex style
% should be easily converted to final format using this style.  
% (1) Submission information (\wordcount, \subject, and \makeidpage)
% should be removed.
% (2) \summary should be removed.  The summary material should come
% after \maketitle and should be in the ``abstract'' environment
% (between \begin{abstract} and \end{abstract}).
% (3) Check all citations.  This style should handle citations correctly
% and also allows multiple citations separated by semicolons.
% (4) Check figures and examples.  Because the final format is double-
% column, some adjustments may have to be made to fit text in the column
% or to choose full-width (\figure*} figures.

% Place this in a file called aclap.sty in the TeX search path.  
% (Placing it in the same directory as the paper should also work.)

% Prepared by Peter F. Patel-Schneider, liberally using the ideas of
% other style hackers, including Barbara Beeton.
% This style is NOT guaranteed to work.  It is provided in the hope
% that it will make the preparation of papers easier.
%
% There are undoubtably bugs in this style.  If you make bug fixes,
% improvements, etc.  please let me know.  My e-mail address is:
%       pfps@research.att.com

% Papers are to be prepared using the ``acl'' bibliography style,
% as follows:
%       \documentclass[11pt]{article}
%       \usepackage{acl2000}
%       \title{Title}
%       \author{Author 1 \and Author 2 \\ Address line \\ Address line \And
%               Author 3 \\ Address line \\ Address line}
%       \begin{document}
%       ...
%       \bibliography{bibliography-file}
%       \bibliographystyle{acl}
%       \end{document}

% Author information can be set in various styles:
% For several authors from the same institution:
% \author{Author 1 \and ... \and Author n \\
%         Address line \\ ... \\ Address line}
% if the names do not fit well on one line use
%         Author 1 \\ {\bf Author 2} \\ ... \\ {\bf Author n} \\
% For authors from different institutions:
% \author{Author 1 \\ Address line \\  ... \\ Address line
%         \And  ... \And
%         Author n \\ Address line \\ ... \\ Address line}
% To start a seperate ``row'' of authors use \AND, as in
% \author{Author 1 \\ Address line \\  ... \\ Address line
%         \AND
%         Author 2 \\ Address line \\ ... \\ Address line \And
%         Author 3 \\ Address line \\ ... \\ Address line}

% If the title and author information does not fit in the area allocated,
% place \setlength\titlebox{<new height>} right after
% \usepackage{acl2000}
% where <new height> can be something larger than 2.25in

% \typeout{Conference Style for ACL 2000 -- released June 20, 2000}
\typeout{Conference Style for ACL 2005 -- released Octobe 11, 2004}

% NOTE:  Some laser printers have a serious problem printing TeX output.
% These printing devices, commonly known as ``write-white'' laser
% printers, tend to make characters too light.  To get around this
% problem, a darker set of fonts must be created for these devices.
%

% Physical page layout - slightly modified from IJCAI by pj
\setlength\topmargin{0.0in} \setlength\oddsidemargin{-0.0in}
\setlength\textheight{9.0in} \setlength\textwidth{6.5in}
\setlength\columnsep{0.2in}
\newlength\titlebox
\setlength\titlebox{2.25in}
\setlength\headheight{0pt}   \setlength\headsep{0pt}
%\setlength\footheight{0pt}
\setlength\footskip{0pt}
\thispagestyle{empty}      \pagestyle{empty}
\flushbottom \twocolumn \sloppy

%% A4 version of page layout
%\setlength\topmargin{-0.45cm}    % changed by Rz  -1.4
%\setlength\oddsidemargin{.8mm}   % was -0cm, changed by Rz
%\setlength\textheight{23.5cm} 
%\setlength\textwidth{15.8cm}
%\setlength\columnsep{0.6cm}  
%\newlength\titlebox 
%\setlength\titlebox{2.00in}
%\setlength\headheight{5pt}   
%\setlength\headsep{0pt}
%%\setlength\footheight{0pt}
%\setlength\footskip{0pt}
%\thispagestyle{empty}        
%\pagestyle{empty}

\flushbottom \twocolumn \sloppy

% We're never going to need a table of contents, so just flush it to
% save space --- suggested by drstrip@sandia-2
\def\addcontentsline#1#2#3{}

% Title stuff, taken from deproc.
\def\maketitle{\par
 \begingroup
   \def\thefootnote{\fnsymbol{footnote}}
   \def\@makefnmark{\hbox to 0pt{$^{\@thefnmark}$\hss}}
   \twocolumn[\@maketitle] \@thanks
 \endgroup
 \setcounter{footnote}{0}
 \let\maketitle\relax \let\@maketitle\relax
 \gdef\@thanks{}\gdef\@author{}\gdef\@title{}\let\thanks\relax}
\def\@maketitle{\vbox to \titlebox{\hsize\textwidth
 \linewidth\hsize \vskip 0.125in minus 0.125in \centering
 {\Large\bf \@title \par} \vskip 0.2in plus 1fil minus 0.1in
 {\def\and{\unskip\enspace{\rm and}\enspace}%
  \def\And{\end{tabular}\hss \egroup \hskip 1in plus 2fil 
           \hbox to 0pt\bgroup\hss \begin{tabular}[t]{c}\bf}%
  \def\AND{\end{tabular}\hss\egroup \hfil\hfil\egroup
          \vskip 0.25in plus 1fil minus 0.125in
           \hbox to \linewidth\bgroup\large \hfil\hfil
             \hbox to 0pt\bgroup\hss \begin{tabular}[t]{c}\bf}
  \hbox to \linewidth\bgroup\large \hfil\hfil
    \hbox to 0pt\bgroup\hss \begin{tabular}[t]{c}\bf\@author 
                            \end{tabular}\hss\egroup
    \hfil\hfil\egroup}
  \vskip 0.3in plus 2fil minus 0.1in
}}
\renewenvironment{abstract}{\centerline{\large\bf  
 Abstract}\vspace{0.5ex}\begin{quote} \small}{\par\end{quote}\vskip 1ex}


% bibliography

\def\thebibliography#1{\section*{References}
  \global\def\@listi{\leftmargin\leftmargini
               \labelwidth\leftmargini \advance\labelwidth-\labelsep
               \topsep 1pt plus 2pt minus 1pt
               \parsep 0.25ex plus 1pt \itemsep 0.25ex plus 1pt}
  \list {[\arabic{enumi}]}{\settowidth\labelwidth{[#1]}\leftmargin\labelwidth
    \advance\leftmargin\labelsep\usecounter{enumi}}
    \def\newblock{\hskip .11em plus .33em minus -.07em}
    \sloppy
    \sfcode`\.=1000\relax}

\def\@up#1{\raise.2ex\hbox{#1}}

% most of cite format is from aclsub.sty by SMS

% don't box citations, separate with ; and a space
% also, make the penalty between citations negative: a good place to break
% changed comma back to semicolon pj 2/1/90
% \def\@citex[#1]#2{\if@filesw\immediate\write\@auxout{\string\citation{#2}}\fi
% \def\@citea{}\@cite{\@for\@citeb:=#2\do
%   {\@citea\def\@citea{;\penalty\@citeseppen\ }\@ifundefined
%      {b@\@citeb}{{\bf ?}\@warning
%      {Citation `\@citeb' on page \thepage \space undefined}}%
% {\csname b@\@citeb\endcsname}}}{#1}}

% don't box citations, separate with ; and a space
% Replaced for multiple citations (pj) 
% don't box citations and also add space, semicolon between multiple citations
\def\@citex[#1]#2{\if@filesw\immediate\write\@auxout{\string\citation{#2}}\fi
  \def\@citea{}\@cite{\@for\@citeb:=#2\do
     {\@citea\def\@citea{; }\@ifundefined
       {b@\@citeb}{{\bf ?}\@warning
        {Citation `\@citeb' on page \thepage \space undefined}}%
 {\csname b@\@citeb\endcsname}}}{#1}}

% Allow short (name-less) citations, when used in
% conjunction with a bibliography style that creates labels like
%       \citename{<names>, }<year>
% 
\let\@internalcite\cite
\def\cite{\def\citename##1{##1, }\@internalcite}
\def\shortcite{\def\citename##1{}\@internalcite}
\def\newcite{\def\citename##1{{\frenchspacing##1} (}\@internalciteb}

% Macros for \newcite, which leaves name in running text, and is
% otherwise like \shortcite.
\def\@citexb[#1]#2{\if@filesw\immediate\write\@auxout{\string\citation{#2}}\fi
  \def\@citea{}\@newcite{\@for\@citeb:=#2\do
    {\@citea\def\@citea{;\penalty\@m\ }\@ifundefined
       {b@\@citeb}{{\bf ?}\@warning
       {Citation `\@citeb' on page \thepage \space undefined}}%
{\csname b@\@citeb\endcsname}}}{#1}}
\def\@internalciteb{\@ifnextchar [{\@tempswatrue\@citexb}{\@tempswafalse\@citexb[]}}

\def\@newcite#1#2{{#1\if@tempswa, #2\fi)}}

\def\@biblabel#1{\def\citename##1{##1}[#1]\hfill}

%%% More changes made by SMS (originals in latex.tex)
% Use parentheses instead of square brackets in the text.
\def\@cite#1#2{({#1\if@tempswa , #2\fi})}

% Don't put a label in the bibliography at all.  Just use the unlabeled format
% instead.
\def\thebibliography#1{\small\vskip\parskip%
\vskip\baselineskip%
\def\baselinestretch{1}%
\ifx\@currsize\normalsize\@normalsize\else\@currsize\fi%
\vskip-\parskip%
\vskip-\baselineskip%
\section*{References\@mkboth
 {References}{References}}\list
 {}{\setlength{\labelwidth}{0pt}\setlength{\leftmargin}{\parindent}
 \setlength{\itemsep}{-0.5ex}
 \setlength{\itemindent}{-\parindent}}
 \def\newblock{\hskip .11em plus .33em minus -.07em}
 \sloppy\clubpenalty4000\widowpenalty4000
 \sfcode`\.=1000\relax}
\let\endthebibliography=\endlist

% Allow for a bibliography of sources of attested examples
\def\thesourcebibliography#1{\vskip\parskip%
\vskip\baselineskip%
\def\baselinestretch{1}%
\ifx\@currsize\normalsize\@normalsize\else\@currsize\fi%
\vskip-\parskip%
\vskip-\baselineskip%
\section*{Sources of Attested Examples\@mkboth
 {Sources of Attested Examples}{Sources of Attested Examples}}\list
 {}{\setlength{\labelwidth}{0pt}\setlength{\leftmargin}{\parindent}
 \setlength{\itemindent}{-\parindent}}
 \def\newblock{\hskip .11em plus .33em minus -.07em}
 \sloppy\clubpenalty4000\widowpenalty4000
 \sfcode`\.=1000\relax}
\let\endthesourcebibliography=\endlist

\def\@lbibitem[#1]#2{\item[]\if@filesw 
      { \def\protect##1{\string ##1\space}\immediate
        \write\@auxout{\string\bibcite{#2}{#1}}\fi\ignorespaces}}

\def\@bibitem#1{\item\if@filesw \immediate\write\@auxout
       {\string\bibcite{#1}{\the\c@enumi}}\fi\ignorespaces}

% sections with less space
\def\section{\@startsection {section}{1}{\z@}{-2.0ex plus
    -0.5ex minus -.2ex}{1.5ex plus 0.3ex minus .2ex}{\large\bf\raggedright}}
\def\subsection{\@startsection{subsection}{2}{\z@}{-1.8ex plus
    -0.5ex minus -.2ex}{0.8ex plus .2ex}{\normalsize\bf\raggedright}}
\def\subsubsection{\@startsection{subsubsection}{3}{\z@}{1.5ex plus
   0.5ex minus .2ex}{0.5ex plus .2ex}{\normalsize\bf\raggedright}}
\def\paragraph{\@startsection{paragraph}{4}{\z@}{1.5ex plus
   0.5ex minus .2ex}{-1em}{\normalsize\bf}}
\def\subparagraph{\@startsection{subparagraph}{5}{\parindent}{1.5ex plus
   0.5ex minus .2ex}{-1em}{\normalsize\bf}}

% Footnotes
\footnotesep 6.65pt %
\skip\footins 9pt plus 4pt minus 2pt
\def\footnoterule{\kern-3pt \hrule width 5pc \kern 2.6pt }
\setcounter{footnote}{0}

% Lists and paragraphs
\parindent 1em
\topsep 4pt plus 1pt minus 2pt
\partopsep 1pt plus 0.5pt minus 0.5pt
\itemsep 2pt plus 1pt minus 0.5pt
\parsep 2pt plus 1pt minus 0.5pt

\leftmargin 2em \leftmargini\leftmargin \leftmarginii 2em
\leftmarginiii 1.5em \leftmarginiv 1.0em \leftmarginv .5em \leftmarginvi .5em
\labelwidth\leftmargini\advance\labelwidth-\labelsep \labelsep 5pt

\def\@listi{\leftmargin\leftmargini}
\def\@listii{\leftmargin\leftmarginii
   \labelwidth\leftmarginii\advance\labelwidth-\labelsep
   \topsep 2pt plus 1pt minus 0.5pt
   \parsep 1pt plus 0.5pt minus 0.5pt
   \itemsep \parsep}
\def\@listiii{\leftmargin\leftmarginiii
    \labelwidth\leftmarginiii\advance\labelwidth-\labelsep
    \topsep 1pt plus 0.5pt minus 0.5pt 
    \parsep \z@ \partopsep 0.5pt plus 0pt minus 0.5pt
    \itemsep \topsep}
\def\@listiv{\leftmargin\leftmarginiv
     \labelwidth\leftmarginiv\advance\labelwidth-\labelsep}
\def\@listv{\leftmargin\leftmarginv
     \labelwidth\leftmarginv\advance\labelwidth-\labelsep}
\def\@listvi{\leftmargin\leftmarginvi
     \labelwidth\leftmarginvi\advance\labelwidth-\labelsep}

\abovedisplayskip 7pt plus2pt minus5pt%
\belowdisplayskip \abovedisplayskip
\abovedisplayshortskip  0pt plus3pt%   
\belowdisplayshortskip  4pt plus3pt minus3pt%

% Less leading in most fonts (due to the narrow columns)
% The choices were between 1-pt and 1.5-pt leading
%\def\@normalsize{\@setsize\normalsize{11pt}\xpt\@xpt}
%\def\small{\@setsize\small{10pt}\ixpt\@ixpt}
%\def\footnotesize{\@setsize\footnotesize{10pt}\ixpt\@ixpt}
%\def\scriptsize{\@setsize\scriptsize{8pt}\viipt\@viipt}
%\def\tiny{\@setsize\tiny{7pt}\vipt\@vipt}
%\def\large{\@setsize\large{14pt}\xiipt\@xiipt}
%\def\Large{\@setsize\Large{16pt}\xivpt\@xivpt}
%\def\LARGE{\@setsize\LARGE{20pt}\xviipt\@xviipt}
%\def\huge{\@setsize\huge{23pt}\xxpt\@xxpt}
%\def\Huge{\@setsize\Huge{28pt}\xxvpt\@xxvpt}

\let\@@makecaption\@makecaption
\renewcommand{\@makecaption}[1]{\@@makecaption{\small #1}}

\newcommand{\Thanks}[1]{\thanks{\ #1}}