paper-conference-minted.tex

% This template has been tested with IEEEtran of 2015.

% !TeX spellcheck = en-US
% LTeX: language=en-US
% !TeX encoding = utf8
% !TeX program = lualatex
% !TeX TXS-program:compile = txs:///lualatex/[--shell-escape]
% !BIB program = bibtex
% -*- coding:utf-8 mod:LaTeX -*-

% DO NOT DOWNLOAD IEEEtran.cls - Use the one of your LaTeX distribution
% For the final version, replace "draftcls" by "final"
\documentclass[conference,a4paper,english]{IEEEtran}[2015/08/26]

% Balance the last page using the balance package (see https://ctan.org/pkg/balance)
% Alternative to balance is the pbalance package (see https://ctan.org/pkg/pbalance), which sometimes works better
\usepackage{balance}

\usepackage{iftex}

% backticks (`) are rendered as such in verbatim environments.
% See following links for details:
%   - https://tex.stackexchange.com/a/341057/9075
%   - https://tex.stackexchange.com/a/47451/9075
%   - https://tex.stackexchange.com/a/166791/9075
\usepackage{upquote}

% Set English as language and allow to write hyphenated"=words
%
% Even though `american`, `english` and `USenglish` are synonyms for babel package (according to https://tex.stackexchange.com/questions/12775/babel-english-american-usenglish), the llncs document class is prepared to avoid the overriding of certain names (such as "Abstract." -> "Abstract" or "Fig." -> "Figure") when using `english`, but not when using the other 2.
% english has to go last to set it as default language
\usepackage[ngerman,main=english]{babel}
%
% Hint by http://tex.stackexchange.com/a/321066/9075 -> enable "= as dashes
\addto\extrasenglish{\languageshorthands{ngerman}\useshorthands{"}}

% Links behave as they should. Enables "\url{...}" for URL typesettings.
% Allow URL breaks also at a hyphen, even though it might be confusing: Is the "-" part of the address or just a hyphen?
% See https://tex.stackexchange.com/a/3034/9075.
\usepackage[hyphens]{url}

% When activated, use text font as url font, not the monospaced one.
% For all options see https://tex.stackexchange.com/a/261435/9075.
% \urlstyle{same}

% Improve wrapping of URLs - hint by http://tex.stackexchange.com/a/10419/9075
\makeatletter
\g@addto@macro{\UrlBreaks}{\UrlOrds}
\makeatother

% nicer // - solution by http://tex.stackexchange.com/a/98470/9075
% DO NOT ACTIVATE -> prevents line breaks
%\makeatletter
%\def\Url@twoslashes{\mathchar`\/\@ifnextchar/{\kern-.2em}{}}
%\g@addto@macro\UrlSpecials{\do\/{\Url@twoslashes}}
%\makeatother

%% !!! If you change the font, be sure that words such as "workflow" can
%% !!! still be copied from the PDF. If this is not the case, you have
%% !!! to use glyphtounicode. See comment at cmap package.
%%
%% Background: "workflow" contains "fl" which is a ligature, which in turn
%%             is rendered as one character in the PDF and needs to be split
%%             whily copying.

\ifluatex
  \usepackage[no-math]{fontspec}
  \usepackage{unicode-math}

  % Enable proper ligatures
  % For more information see https://ctan.org/pkg/selnolig
  % language "english" or "ngerman" is passed to selnolig by the document class
  \usepackage{selnolig}
\else
  % use nicer font for code
  \usepackage[zerostyle=b,scaled=.75]{newtxtt}

  % Has to be loaded AFTER any font packages. See https://tex.stackexchange.com/a/2869/9075.
  \usepackage[T1]{fontenc}
\fi

% Character protrusion and font expansion. See http://www.ctan.org/tex-archive/macros/latex/contrib/microtype/

\usepackage[
  babel=true, % Enable language-specific kerning. Take language-settings from the languge of the current document (see Section 6 of microtype.pdf)
  expansion=alltext,
  protrusion=alltext-nott, % Ensure that at listings, there is no change at the margin of the listing
  % In the standard configuration, this template is always in the final mode, so this option only makes a difference if "pros" use the draft mode
  final % Always enable microtype, even if in draft mode. This helps finding bad boxes quickly.
]{microtype}

% \texttt{test -- test} keeps the "--" as "--" (and does not convert it to an en dash)
\DisableLigatures{encoding = T1, family = tt* }

%\DeclareMicrotypeSet*[tracking]{my}{ font = */*/*/sc/* }%
%\SetTracking{ encoding = *, shape = sc }{ 45 }
% Source: http://homepage.ruhr-uni-bochum.de/Georg.Verweyen/pakete.html
% Deactiviated, because does not look good

\usepackage{graphicx}

% Diagonal lines in a table - http://tex.stackexchange.com/questions/17745/diagonal-lines-in-table-cell
% Slashbox is not available in texlive (due to licensing) and also gives bad results. Thus, we use diagbox
\usepackage{diagbox}

\ifluatex
  \usepackage{spelling}
  \spellingoutput{off}
\fi

\usepackage[dvipsnames, table]{xcolor}
% See https://github.com/gpoore/minted
\usepackage[newfloat]{minted}

\setminted{
  % Line numbers not flowing out of the margin
  numbersep=5pt,
  xleftmargin=12pt,
  %
  % Better listing breaking
  breakafter=-/\{,
  breakbefore=\\
  %
  % Alternative: Rely on pygment's tokenizer. Does not work well with LaTeX and comments
  % breakbytoken=true,
  % breakbytokenanywhere=true
}

%\usemintedstyle{bw} %black and white style
%\usemintedstyle{vs} %visual studio
\usemintedstyle{friendly_grayscale}
%\usemintedstyle{friendly}
%\usemintedstyle{eclipse} %http://www.jevon.org/wiki/Eclipse_Pygments_Style
%\usemintedstyle{autumn}
%\usemintedstyle{rrt}
%\usemintedstyle{borland}

% We need to load caption to have a bold font on the label
% The other parameters mimic the layout of the LNCS class
\usepackage[labelfont=bf,font=small,skip=4pt]{caption}
\SetupFloatingEnvironment{listing}{name=List.,within=none}

% When using both minted and listings
% Compatibility of packages minted and listings with respect to the numbering of "List." caption
% Source: https://tex.stackexchange.com/a/269510/9075
% \AtBeginEnvironment{listing}{\setcounter{listing}{\value{lstlisting}}}
% \AtEndEnvironment{listing}{\stepcounter{lstlisting}}

% Intermediate solution for hyperlinked refs. See https://tex.stackexchange.com/q/132420/9075 for more information.
\newcommand{\labelline}[1]{\label[line]{#1}\hypertarget{#1}{}}
\newcommand{\refline}[1]{\hyperlink{#1}{\FancyVerbLineautorefname~\ref*{#1}}}

% For easy quotations: \enquote{text}
% This package is very smart when nesting is applied, otherwise textcmds (see below) provides a shorter command
\usepackage[autostyle=true]{csquotes}

% Enable using "`quote"' - see https://tex.stackexchange.com/a/150954/9075
\defineshorthand{"`}{\openautoquote}
\defineshorthand{"'}{\closeautoquote}

% Nicer tables (\toprule, \midrule, \bottomrule)
\usepackage{booktabs}

% Extended enumerate, such as \begin{compactenum}
\usepackage{paralist}

% Bibliopgraphy enhancements
%  - enable \cite[prenote][]{ref}
%  - enable \cite{ref1,ref2}
% Alternative: \usepackage{cite}, which enables \cite{ref1, ref2} only (otherwise: Error message: "White space in argument")

% Doc: http://texdoc.net/natbib
\usepackage[%
  square,        % for square brackets
  comma,         % use commas as separators
  numbers,       % for numerical citations;
  %sort           % orders multiple citations into the sequence in which they appear in the list of references;
  sort&compress  % as sort but in addition multiple numerical citations are compressed if possible (as 3-6, 15);
]{natbib}

% Same fontsize as without natbib
\renewcommand{\bibfont}{\normalfont\footnotesize}

% Enable hyperlinked author names in the case of \citet
% Source: https://tex.stackexchange.com/a/76075/9075
\usepackage{etoolbox}
\makeatletter
\patchcmd{\NAT@test}{\else \NAT@nm}{\else \NAT@hyper@{\NAT@nm}}{}{}
\makeatother

% Farbige Tabellen
% ----------------
% Das Paket colortbl wird inzwischen automatisch durch xcolor geladen
%
% Erweiterte Funktionen innerhalb von Tabellen
% --------------------------------------------
%%% Doc: http://mirror.ctan.org/tex-archive/macros/latex/contrib/multirow/multirow.sty
\usepackage{multirow} % Mehrfachspalten
%
%%% Doc: Documentation inside dtx Package
\usepackage{dcolumn}  % Ausrichtung an Komma oder Punkt

%%% Doc: http://mirror.ctan.org/tex-archive/macros/latex/contrib/supertabular/supertabular.pdf
%\usepackage{supertabular}

%%% Fussnoten/Endnoten ===================================================

% EN: Put footnotes below floats
% DE: Fußnoten unter Gleitumgebungen ("floats") platzieren
% Source: https://tex.stackexchange.com/a/32993/9075
\usepackage{stfloats}
\fnbelowfloat

% EN: Extended support for footnotes
% DE: Fußnoten
%
%\usepackage{dblfnote}  %Zweispaltige Fußnoten
%
% Keine hochgestellten Ziffern in der Fußnote (KOMA-Script-spezifisch):
%\deffootnote[1.5em]{0pt}{1em}{\makebox[1.5em][l]{\bfseries\thefootnotemark}}
%
% Abstand zwischen Fußnoten vergrößern:
%\setlength{\footnotesep}{.85\baselineskip}
%
% EN: Following command disables the separting line of the footnote
% DE: Folgendes Kommando deaktiviert die Trennlinie zur Fußnote
%\renewcommand{\footnoterule}{}
%
%\addtolength{\skip\footins}{\baselineskip} % Abstand Text <-> Fußnote

% DE: Fußnoten immer ganz unten auf einer \raggedbottom-Seite
% DE: fnpos kommt aus dem yafoot package
%\usepackage{fnpos}
%\makeFNbelow
%\makeFNbottom

% TODO (and comment) configuration
%
% - \todo (from todo, easy-todo, todonotes) / \TODO (from fixmetodonotes) - for "normal" TODOs
% - \todofix - "important" TODOs
%
% - \textcomment - highlights text and has a hover comment
% - \sidecomment - just puts a comment to the side. Note: \comment MUST NOT be used as command name, it is already defined by much packages (mathdesign, mindflow, verbatim, and others)
%
% - \missingfigure
%
% - \textmarker
% - \modified
% - \change      - adresses a review comment

% Enable nice comments
\usepackage{pdfcomment}

\newcommand{\textcomment}[2]{\colorbox{yellow!60}{#1}\pdfcomment[color={0.234 0.867 0.211},hoffset=-6pt,voffset=10pt,opacity=0.5]{#2}}

% Small PDF comment
% 1. Parameter: Comment
\newcommand{\sidecomment}[1]{\pdfcomment[color={0.045 0.278 0.643},voffset=4pt,icon=Note]{#1}}
% Disabled variant - for the final PDF
%\newcommand{\sidecomment}[1]{}

\newcommand{\todo}[1]{TODO!\sidecomment{#1}}

% Änderungen
%
% 1. Parameter: Review-Kommentar
% 2. Parameter: Neuer Text
\newcommand{\change}[2]{{\color{red}#2}\pdfcomment[color={0.234 0.867 0.211},voffset=8pt,opacity=0.5]{#1}}
% Disabled variant - for the final PDF
%\newcommand{\change}[2]{#2}

% Define default commands
\makeatletter
\@ifundefined{missingfigure}{\newcommand{\missingfigure}{... missing figure ...}}{}
\@ifundefined{textcomment}{\newcommand{\textcomment}[2]{#1 \todo{#2}}}{}
\@ifundefined{sidecomment}{\newcommand{\sidecomment}[1]{\marginpar{#1}}}{}
\@ifundefined{todo}{\newcommand{\todo}[1]{\sidecomment{#1}}}{}
\@ifundefined{TODO}{\newcommand{\TODO}[1]{\todo{#1}}}{}
\@ifundefined{todofix}{\newcommand{\todofix}[1]{\todo{#1}}}{}
\@ifundefined{change}{\newcommand{\change}[2]{#1 $\rightarrow$ #2}}{}
\makeatother

% Textmarker (Textfarbe rot)
\newcommand{\textmarker}[1]{{\color{red} #1}\xspace}

% Modified (Text blau)
\newcommand{\modified}[1]{{\color{blue!60!black} #1}\xspace}

\usepackage[group-minimum-digits=4,per-mode=fraction]{siunitx}

% Enable that parameters of \cref{}, \ref{}, \cite{}, ... are linked so that a reader can click on the number an jump to the target in the document
\usepackage{hyperref}

% Enable hyperref without colors and without bookmarks
\hypersetup{
  hidelinks,
  colorlinks=true,       % Links erhalten Farben statt Kaeten
  raiselinks=true,       % calculate real height of the link
  allcolors=black,
  pdfstartview=Fit,
  breaklinks=true,       % Links ueberstehen Zeilenumbruch
  hypertexnames=false,   % Fix jumping to algorithm line - http://tex.stackexchange.com/a/156404/9075
}

% Enable correct jumping to figures when referencing
\usepackage[all]{hypcap}

\usepackage[caption=false,font=footnotesize]{subfig}

% Alternative for making subfigures:
% Part of the caption package. See http://www.ctan.org/pkg/caption
% Ersetzt die Pakete subfigure und subfig - siehe https://tex.stackexchange.com/a/13778/9075
%
% (subfigure is outdated. subfig is maintained, but subcaption is better)
% See: http://tex.stackexchange.com/questions/13625/subcaption-vs-subfig-best-package-for-referencing-a-subfigure
%\usepackage[hypcap=true]{subcaption}

\usepackage[incolumn]{mindflow}

% Extensions for references inside the document (\cref{fig:sample}, ...)
% Enable usage \cref{...} and \Cref{...} instead of \ref: Type of reference included in the link
% That means, "Figure 5" is a full link instead of just "5".
\usepackage[capitalise,nameinlink,noabbrev]{cleveref}

\crefname{listing}{Listing}{Listings}
\Crefname{listing}{Listing}{Listings}

% Intermediate solution for hyperlinked refs. See https://tex.stackexchange.com/q/132420/9075 for more information.
\newcommand{\llabel}[1]{\label[line]{#1}\hypertarget{#1}{}}
\newcommand{\lref}[1]{\hyperlink{#1}{\FancyVerbLineautorefname~\ref*{#1}}}

\usepackage{lipsum}

% For demonstration purposes only
% These packages can be removed when all examples have been deleted
\usepackage[math]{blindtext}
\usepackage{mwe}
\usepackage[realmainfile]{currfile}
\usepackage{tcolorbox}
\tcbuselibrary{minted}

%introduce \powerset - hint by http://matheplanet.com/matheplanet/nuke/html/viewtopic.php?topic=136492&post_id=997377
\DeclareFontFamily{U}{MnSymbolC}{}
\DeclareSymbolFont{MnSyC}{U}{MnSymbolC}{m}{n}
\DeclareFontShape{U}{MnSymbolC}{m}{n}{
  <-6>    MnSymbolC5
  <6-7>   MnSymbolC6
  <7-8>   MnSymbolC7
  <8-9>   MnSymbolC8
  <9-10>  MnSymbolC9
  <10-12> MnSymbolC10
  <12->   MnSymbolC12%
}{}
\DeclareMathSymbol{\powerset}{\mathord}{MnSyC}{180}

% Allows for defining commands that don't eat spaces.
\usepackage{xspace}
% Adds compatibility to \xspace und \enquote
\makeatletter
\xspaceaddexceptions{\grqq \grq \csq@qclose@i \} }
\makeatother

\newcommand{\eg}{e.g.,\ }
\newcommand{\ie}{i.e.,\ }

% Enable hyphenation at other places as the dash.
% Example: applicaiton\hydash specific
\makeatletter
\newcommand{\hydash}{\penalty\@M-\hskip\z@skip}
% Definition of "= taken from http://mirror.ctan.org/macros/latex/contrib/babel-contrib/german/ngermanb.dtx
\makeatother

% Add manual adapted hyphenation of English words
% See https://ctan.org/pkg/hyphenex and https://tex.stackexchange.com/a/22892/9075 for details
\input{ushyphex}

\ifluatex
  % Enable correct rendering of ligatures - provided by https://ctan.org/pkg/selnolig
  % See ADR-0009 for alternatives
  \usepackage{selnolig}
\fi

% correct bad hyphenation here
\hyphenation{
  op-tical net-works semi-conduc-tor
  % May not be hypphenated
  AROMA TOSCA BPMN OASIS OMG DMTF IT DevOps
}

\input{commands}

\ifpdftex
  % Enable copy and paste of text from the PDF
  % Only required for pdflatex. It "just works" in the case of lualatex.
  % Alternative: cmap or mmap package
  % mmap enables mathematical symbols, but does not work with the newtx font set
  % See: https://tex.stackexchange.com/a/64457/9075
  % Other solutions outlined at http://goemonx.blogspot.de/2012/01/pdflatex-ligaturen-und-copynpaste.html and http://tex.stackexchange.com/questions/4397/make-ligatures-in-linux-libertine-copyable-and-searchable
  % Trouble shooting outlined at https://tex.stackexchange.com/a/100618/9075
  %
  % According to https://tex.stackexchange.com/q/451235/9075 this is the way to go
  \input{glyphtounicode}
  \pdfgentounicode=1
\fi
\begin{document}
% Enable following command if you need to typeset "IEEEpubid".
% See https://bytefreaks.net/tag/ieeeoverridecommandlockouts for details.
%\IEEEoverridecommandlockouts

\title{Quick start for LaTeXing with IEEEtran.cls for\\ IEEE Computer Society Conferences}

\author{%
  \IEEEauthorblockN{First Author, Second Author}
  \IEEEauthorblockA{University of Examples, Germany\\
    \{lastname\}@example.org}
  \and
  \IEEEauthorblockN{Third Author}
  \IEEEauthorblockA{School of Electrical and\\Computer Examples\\
    Georgia Institute of Examples\\
    Atlanta, Georgia 30332--0250\\
    \url{http://www.example.org}}
}

% use for special paper notices
%\IEEEspecialpapernotice{(Invited Paper)}

% make the title area
\maketitle

% In case you want to add a copyright statement.
% Works only in the compsoc conference mode.
%
% Source: https://tex.stackexchange.com/a/325013/9075
%
% All possible solutions:
%  - https://tex.stackexchange.com/a/325013/9075
%  - https://tex.stackexchange.com/a/279134/9075
%  - https://tex.stackexchange.com/q/279789/9075 (TikZ)
%  - https://tex.stackexchange.com/a/200330/9075 - for non-compsocc papers
\iffalse
  \IEEEoverridecommandlockouts
  \IEEEpubid{\begin{minipage}{\textwidth}\ \\[12pt] \centering
      1551-3203 \copyright 2015 IEEE.
      Personal use is permitted, but republication/redistribution requires IEEE permission.
      \\
      See \url{https://www.ieee.org/publications_standards/publications/rights/index.html} for more information.
    \end{minipage}}
\fi

\begin{abstract}
\lipsum[1]

\end{abstract}

% For peer review papers, you can put extra information on the cover
% page as needed:
% \ifCLASSOPTIONpeerreview
% \begin{center} \bfseries EDICS Category: 3-BBND \end{center}
% \fi
%
% For peerreview papers, this IEEEtran command inserts a page break and
% creates the second title. It will be ignored for other modes.
\IEEEpeerreviewmaketitle

\section{Introduction}
\label{sec:introduction}
\lipsum[1-3]\todo{Refine me}

The remainder of the paper starts with a presentation of related work (\cref{sec:relatedwork}).
It is followed by a presentation of hints on \LaTeX{} (\cref{sec:latexhints}).
Finally, a conclusion is drawn and outlook on future work is made (\cref{sec:outlook}).

\section{Related Work}
\label{sec:relatedwork}

Winery~\cite{Winery} is a graphical \textcomment{modeling}{modeling with one ``l'', because of American English} tool.
The whole idea of TOSCA is explained by \citet{Binz2009}.

\section{LaTeX Hints}
\label{sec:latexhints}

% Required for proper example rendering in the compiled PDF
\newcount\LTGbeginlineexample
\newcount\LTGendlineexample
\newenvironment{ltgexample}%
{\LTGbeginlineexample=\numexpr\inputlineno+1\relax}%
{\LTGendlineexample=\numexpr\inputlineno-1\relax%
  \tcbinputlisting{%
    listing only,
    listing file=\currfilepath,
    colback=green!5!white,
    colframe=green!25,
    coltitle=black!90,
    coltext=black!90,
    left=8mm,
    title=Corresponding \LaTeX{} code of \texttt{\currfilepath},
    minted language=TeX,
    minted style=vs,
    minted options={
        fontsize=\footnotesize,
        firstline=\the\LTGbeginlineexample,
        lastline=\the\LTGendlineexample,
        firstnumber=\the\LTGbeginlineexample,
        breaklines,
        linenos,
        numbersep=8pt
      }
  }
}%

This section contains hints on writing LaTeX.
It focuses on minimal examples, which can be directly adapted to the content

\subsection{Handling of paragraphs}

\begin{ltgexample}
One sentence per line.
This rule is important for the usage of version control systems.
A new line is generated with a blank line.
As you would do in Word:
New paragraphs are generated by pressing enter.
In LaTeX, this does not lead to a new paragraph as LaTeX joins subsequent lines.
In case you want a new paragraph, just press enter twice!
This leads to an empty line.
In word, there is the functionality to press shift and enter.
This leads to a hard line break.
The text starts at the beginning of a new line.
In LaTeX, you can do that by using two backslashes (\textbackslash\textbackslash).
\\
This is rarely used.

Please do \textit{not} use two backslashes for new paragraphs.
For instance, this sentence belongs to the same paragraph, whereas the last one started a new one.
A long motivation for that is provided at \url{http://loopspace.mathforge.org/HowDidIDoThat/TeX/VCS/#section.3}.
\end{ltgexample}

\subsection{Notes separated from the text}

The package mindflow enables writing down notes and annotations in a way so that they are separated from the main text.

\begin{ltgexample}
\begin{mindflow}
This is a small note.
\end{mindflow}
\end{ltgexample}

\subsection{Handling TODOs}

\begin{ltgexample}
\textmarker{Markierter Text.}
\end{ltgexample}

Bei \verb1\textmarker1 wird nur die Textfarbe geändert, da dies auch bei einigen Worten gut funktioniert.

\begin{ltgexample}
\textcomment{Markierter Text.}{Kommentar dazu.}
\end{ltgexample}

\begin{ltgexample}
\modified{Manuelle Markierung für Text, der seit der letzten Version geändert wurde.}
\end{ltgexample}

\begin{ltgexample}
Das ist ein Text.
\change{FL1: Text angepasst}{Geänderter Text}.
\end{ltgexample}

\begin{ltgexample}
Hier nur ein Kommentar\sidecomment{Kommentar}.
\end{ltgexample}

\begin{ltgexample}
\todo{Hier muss noch kräftig Text produziert werden}
\end{ltgexample}

\subsection{Hyphenation}

\LaTeX{} automatically hyphenates words.
When using \href{https://ctan.org/pkg/microtype}{microtype}, there should be fewer hyphenations than in other settings.
It might be necessary to tweak the hyphenations nevertheless.
Here are some hints:

\begin{ltgexample}
In case you write \enquote{application-specific}, then the word will only be hyphenated at the dash.
You can also write \verb1applica\allowbreak{}tion-specific1 (result: applica\allowbreak{}tion-specific), but this is much more effort.

You can now write words containing hyphens which are hyphenated at other places in the word.
For instance, \verb1application"=specific1 gets application"=specific.
This is enabled by an additional configuration of the babel package.
\end{ltgexample}

\subsection{Typesetting Units}

\begin{ltgexample}
Numbers can be written plain text (such as 100), by using the \href{https://ctan.org/pkg/siunitx}{siunitx} package as follows:
\SI{100}{\km\per\hour},
or by using plain \LaTeX{} (and math mode):
$100 \frac{\mathit{km}}{h}$.
\end{ltgexample}

\begin{ltgexample}
\SI{5}{\percent} of \SI{10}{kg}
\end{ltgexample}

\begin{ltgexample}
Numbers are automatically grouped: \num{123456}.
\end{ltgexample}

\subsection{Surrounding Text by Quotes}

\begin{ltgexample}
Please use the \enquote{enquote command} to quote something.
Quoting with "`quote"' or ``quote'' also works.

\end{ltgexample}

\subsection{Cleveref examples}
\label{sec:ex:cref}

Cleveref demonstration: Cref at beginning of sentence, cref in all other cases.

\begin{figure}
  \centering
  \includegraphics[width=.75\linewidth]{example-image-a}
  \caption{Example figure for cref demo}
  \label{fig:ex:cref}
\end{figure}

\begin{figure}
  \centering
  \begin{tabular}{ll}
    \toprule
    Heading1 & Heading2 \\
    \midrule
    One      & Two      \\
    Thee     & Four     \\
    \bottomrule
  \end{tabular}
  \caption{Example table for cref demo}
  \label{tab:ex:cref}
\end{figure}

\begin{ltgexample}
\Cref{fig:ex:cref} shows a simple fact, although \cref{fig:ex:cref} could also show something else.

\Cref{tab:ex:cref} shows a simple fact, although \cref{tab:ex:cref} could also show something else.

\Cref{sec:ex:cref} shows a simple fact, although \cref{sec:ex:cref} could also show something else.
\end{ltgexample}

\subsection{Figures}

\begin{ltgexample}
\Cref{fig:label} shows something interesting.

\begin{figure}
  \centering
  \includegraphics[width=.8\linewidth]{example-image-golden}
  \caption[Simple Figure]{
    Simple Figure.
    Based on \citet{mwe}.
  }
  \label{fig:label}
\end{figure}
\end{ltgexample}

One can span a figure across multiple columns by using \verb+\begin{figure*}+.
See \cref{fig:16x9} as an example.

\begin{ltgexample}
\begin{figure*}
  \centering
  % note that \textwidth is used instead of \linewidth
  % This ensures that the graphics width is 60% of the "page" (text block), and not just 60% of the current text column
  % See https://tex.stackexchange.com/a/17085/9075 for details
  \includegraphics[width=.6\textwidth]{example-image-16x9}
  \caption{16x9 Figure}
  \label{fig:16x9}
\end{figure*}
\end{ltgexample}


\subsection{Sub Figures}

An example of two sub figures is shown in \cref{fig:two_sub_figures}.

\begin{ltgexample}
\begin{figure*}[!b]
  \centering
  \subfloat[Case I]{\includegraphics[width=.4\linewidth]{example-image-a}%
    \label{fig:first_case}}
  \hfil
  \subfloat[Case II]{\includegraphics[width=.4\linewidth]{example-image-b}%
    \label{fig:second_case}}
  \caption{Example figure with two sub figures.}
  \label{fig:two_sub_figures}
\end{figure*}
\end{ltgexample}

Note that often IEEE papers with subfigures do not employ subfigure
captions (using the optional argument to \verb+\subfloat[]+), but instead will
reference/describe all of them (a), (b), etc., within the main caption.
Be aware that for subfig.sty to generate the (a), (b), etc., subfigure
labels, the optional argument to \verb+\subfloat+ must be present. If a
subcaption is not desired, just leave its contents blank,
e.g., \verb+\subfloat[]+.
An example is shown in \cref{fig:two_sub_figures_ieee}.

\begin{ltgexample}
\begin{figure*}[!b]
  \centering
  \subfloat[]{\includegraphics[width=.4\linewidth]{example-image-a}%
    \label{fig:first_case_ieee}}
  \hfil
  \subfloat[]{\includegraphics[width=.4\linewidth]{example-image-b}%
    \label{fig:second_case_ieee}}
  \caption{Example figure with two sub figures. IEEE style. (a) The first case. (b) The second case.}
  \label{fig:two_sub_figures_ieee}
\end{figure*}
\end{ltgexample}

\subsection{Tables}

Note that IEEE does not support \verb+\begin{table}+, one has to use \verb+\begin{figure}+.

\begin{ltgexample}
\begin{figure}
  \caption{Simple Table}
  \label{tab:simple}
  \centering
  \begin{tabular}{ll}
    \toprule
    Heading1 & Heading2 \\
    \midrule
    One      & Two      \\
    Thee     & Four     \\
    \bottomrule
  \end{tabular}
\end{figure}
\end{ltgexample}

\begin{ltgexample}
% Source: https://tex.stackexchange.com/a/468994/9075
\begin{figure}
  \caption{Table with diagonal line}
  \label{tab:diag}
  \begin{center}
    \begin{tabular}{|l|c|c|}
      \hline
      \diagbox[width=10em]{Diag \\Column Head I}{Diag Column\\Head II} & Second & Third \\
      \hline
       & foo & bar              \\
      \hline
    \end{tabular}
  \end{center}
\end{figure}
\end{ltgexample}


\subsection{Source Code}

\href{https://github.com/gpoore/minted}{minted} is a sophisticated package to enable properly highlighted listings.
It uses the \href{http://pygments.org/}{pygments} library, which in turn requires Python.

\begin{ltgexample}
\Cref{lst:XML} shows source code written in XML.
\refline{line:comment} contains a comment.

\begin{listing}[htbp]
  \begin{minted}[linenos=true,escapeinside=||]{xml}
<listing name="example">
  <!-- comment --> |\labelline{line:comment}|
  <content>not interesting</content>
</listing>
\end{minted}
  \caption{Example XML listing using minted}
  \label{lst:XML}
\end{listing}
\end{ltgexample}

One can also typeset JSON as shown in \cref{lst:flJSON}.

\begin{ltgexample}
\begin{listing}[htbp]
  \begin{minted}[linenos=true,escapeinside=||]{json}
{
  key: "value"
}
\end{minted}
  \caption{Example JSON listing using minted}
  \label{lst:flJSON}
\end{listing}
\end{ltgexample}

Java is also possible as shown in \cref{lst:flJava}.

\begin{ltgexample}
\begin{listing}[htbp]
  \begin{minted}[linenos=true,escapeinside=||]{java}
public class Hello {
    public static void main (String[] args) {
        System.out.println("Hello World!");
    }
}
\end{minted}
  \caption{Java code rendered using minted}
  \label{lst:flJava}
\end{listing}
\end{ltgexample}

\subsection{Itemization}

One can list items as follows:

\begin{ltgexample}
\begin{itemize}
  \item Item One
  \item Item Two
\end{itemize}
\end{ltgexample}

With the package paralist, one can create itemizations with lesser spacing:

\begin{ltgexample}
\begin{compactitem}
  \item Item One
  \item Item Two
\end{compactitem}
\end{ltgexample}

One can enumerate items as follows:

\begin{ltgexample}
\begin{enumerate}
  \item Item One
  \item Item Two
\end{enumerate}
\end{ltgexample}

With the package paralist, one can create enumerations with lesser spacing:

\begin{ltgexample}
\begin{compactenum}
  \item Item One
  \item Item Two
\end{compactenum}
\end{ltgexample}

With paralist, one can even have all items typeset after each other and have them clean in the TeX document:

\begin{ltgexample}
\begin{inparaenum}
  \item All these items...
  \item ...appear in one line
  \item This is enabled by the paralist package.
\end{inparaenum}
\end{ltgexample}

\subsection{Other Features}

\begin{ltgexample}
The words \enquote{workflow} and \enquote{dwarflike} can be copied from the PDF and pasted to a text file.
\end{ltgexample}

\begin{ltgexample}
The symbol for powerset is now correct: $\powerset$ and not a Weierstrass p ($\wp$).

$\powerset({1,2,3})$
\end{ltgexample}

\begin{ltgexample}
Brackets work as designed:
<test>
One can also input backticks in verbatim text: \verb|`test`|.
\end{ltgexample}


\section{Conclusion and Outlook}
\label{sec:outlook}
\lipsum[1-2]

% regular IEEE prefers the singular form
\section*{Acknowledgment}

Identification of funding sources and other support, and thanks to individuals and groups that assisted in the research and the preparation of the work should be included in an acknowledgment section, which is placed just before the reference section in your document \cite{acmart}.

%%% ===============================================================================
%%% Bibliography
%%% ===============================================================================

In the bibliography, use \texttt{\textbackslash textsuperscript} for \enquote{st}, \enquote{nd}, \ldots:
E.g., \enquote{The 2\textsuperscript{nd} conference on examples}.
When you use \href{https://www.jabref.org}{JabRef}, you can use the clean up command to achieve that.
See \url{https://help.jabref.org/en/CleanupEntries} for an overview of the cleanup functionality.

% trigger a \newpage just before the given reference
% number - used to balance the columns on the last page
% adjust value as needed - may need to be readjusted if
% the document is modified later
%\IEEEtriggeratref{8}
% The "triggered" command can be changed if desired:
%\IEEEtriggercmd{\enlargethispage{-5in}}

% Enable to reduce spacing between bibitems (source: https://tex.stackexchange.com/a/25774)
% \def\IEEEbibitemsep{0pt plus .5pt}

\bibliographystyle{IEEEtranN} % IEEEtranN is the natbib compatible bst file
% argument is your BibTeX string definitions and bibliography database(s)
\bibliography{paper}

% Enfore empty line after bibliography
\ \\
%
\noindent
All links were last followed on October 5, 2020.

\end{document}