v4.2.0-ls262

LinuxServer Changes:

Rebase to Alpine 3.20. Existing users should update their nginx confs to avoid http2 deprecation warnings.

grocy Changes:

Stock

• When using/scanning a stock entry Grocycode on the transfer page, the "Use specific stock item" dropdown (and "From location") is now also prefilled accordingly
• Fixed that for the product's last price stock transactions with an empty or 0 price weren't ignored
• Fixed that when copying a product, the field "Move on open" wasn't copied along

Shopping list

• The shopping lists dropdown on the shopping list page now also shows the number of items on the corresponding shopping list

Recipes

• Optimized that when creating a recipe, the desired serving amount is now initially prefilled by the recipe's base serving amount

Batteries

• It's now possible to track any addtional info on a battery charge cycle by using Userfields (thanks @TheDodger)
  • => Configure the desired Userfields for the entity battery_charge_cycles
  • => The on a battery charge cycle tracking entered information is then visible on the corresponding battery charge cycle journal entry

General

• Optimized that file uploads are no longer completely buffered in memory before writing them to disk (thanks @bbx0)
• Optimized top right corner menus icon spacing (thanks @TheDodger for the initial work on this)
• Fixed again that some dialogs were not properly (too small) displayed (this time mostly affecting Chrome/Edge)
• Fixed that table states (visible columns, sorting, column order and so on) could be reset to default after not accessing/using the corresponding page for a certain amount of time

v4.2.0-ls261

LinuxServer Changes:

Rebase to Alpine 3.20. Existing users should update their nginx confs to avoid http2 deprecation warnings.

grocy Changes:

Stock

• When using/scanning a stock entry Grocycode on the transfer page, the "Use specific stock item" dropdown (and "From location") is now also prefilled accordingly
• Fixed that for the product's last price stock transactions with an empty or 0 price weren't ignored
• Fixed that when copying a product, the field "Move on open" wasn't copied along

Shopping list

• The shopping lists dropdown on the shopping list page now also shows the number of items on the corresponding shopping list

Recipes

• Optimized that when creating a recipe, the desired serving amount is now initially prefilled by the recipe's base serving amount

Batteries

• It's now possible to track any addtional info on a battery charge cycle by using Userfields (thanks @TheDodger)
  • => Configure the desired Userfields for the entity battery_charge_cycles
  • => The on a battery charge cycle tracking entered information is then visible on the corresponding battery charge cycle journal entry

General

• Optimized that file uploads are no longer completely buffered in memory before writing them to disk (thanks @bbx0)
• Optimized top right corner menus icon spacing (thanks @TheDodger for the initial work on this)
• Fixed again that some dialogs were not properly (too small) displayed (this time mostly affecting Chrome/Edge)
• Fixed that table states (visible columns, sorting, column order and so on) could be reset to default after not accessing/using the corresponding page for a certain amount of time

v4.2.0-ls260

LinuxServer Changes:

Rebase to Alpine 3.20. Existing users should update their nginx confs to avoid http2 deprecation warnings.

grocy Changes:

Stock

• When using/scanning a stock entry Grocycode on the transfer page, the "Use specific stock item" dropdown (and "From location") is now also prefilled accordingly
• Fixed that for the product's last price stock transactions with an empty or 0 price weren't ignored
• Fixed that when copying a product, the field "Move on open" wasn't copied along

Shopping list

• The shopping lists dropdown on the shopping list page now also shows the number of items on the corresponding shopping list

Recipes

• Optimized that when creating a recipe, the desired serving amount is now initially prefilled by the recipe's base serving amount

Batteries

• It's now possible to track any addtional info on a battery charge cycle by using Userfields (thanks @TheDodger)
  • => Configure the desired Userfields for the entity battery_charge_cycles
  • => The on a battery charge cycle tracking entered information is then visible on the corresponding battery charge cycle journal entry

General

• Optimized that file uploads are no longer completely buffered in memory before writing them to disk (thanks @bbx0)
• Optimized top right corner menus icon spacing (thanks @TheDodger for the initial work on this)
• Fixed again that some dialogs were not properly (too small) displayed (this time mostly affecting Chrome/Edge)
• Fixed that table states (visible columns, sorting, column order and so on) could be reset to default after not accessing/using the corresponding page for a certain amount of time

v4.2.0-ls259

LinuxServer Changes:

Rebase to Alpine 3.20. Existing users should update their nginx confs to avoid http2 deprecation warnings.

grocy Changes:

Stock

• When using/scanning a stock entry Grocycode on the transfer page, the "Use specific stock item" dropdown (and "From location") is now also prefilled accordingly
• Fixed that for the product's last price stock transactions with an empty or 0 price weren't ignored
• Fixed that when copying a product, the field "Move on open" wasn't copied along

Shopping list

• The shopping lists dropdown on the shopping list page now also shows the number of items on the corresponding shopping list

Recipes

• Optimized that when creating a recipe, the desired serving amount is now initially prefilled by the recipe's base serving amount

Batteries

• It's now possible to track any addtional info on a battery charge cycle by using Userfields (thanks @TheDodger)
  • => Configure the desired Userfields for the entity battery_charge_cycles
  • => The on a battery charge cycle tracking entered information is then visible on the corresponding battery charge cycle journal entry

General

• Optimized that file uploads are no longer completely buffered in memory before writing them to disk (thanks @bbx0)
• Optimized top right corner menus icon spacing (thanks @TheDodger for the initial work on this)
• Fixed again that some dialogs were not properly (too small) displayed (this time mostly affecting Chrome/Edge)
• Fixed that table states (visible columns, sorting, column order and so on) could be reset to default after not accessing/using the corresponding page for a certain amount of time

v4.2.0-ls258

LinuxServer Changes:

Rebase to Alpine 3.20. Existing users should update their nginx confs to avoid http2 deprecation warnings.

grocy Changes:

Stock

• When using/scanning a stock entry Grocycode on the transfer page, the "Use specific stock item" dropdown (and "From location") is now also prefilled accordingly
• Fixed that for the product's last price stock transactions with an empty or 0 price weren't ignored
• Fixed that when copying a product, the field "Move on open" wasn't copied along

Shopping list

• The shopping lists dropdown on the shopping list page now also shows the number of items on the corresponding shopping list

Recipes

• Optimized that when creating a recipe, the desired serving amount is now initially prefilled by the recipe's base serving amount

Batteries

• It's now possible to track any addtional info on a battery charge cycle by using Userfields (thanks @TheDodger)
  • => Configure the desired Userfields for the entity battery_charge_cycles
  • => The on a battery charge cycle tracking entered information is then visible on the corresponding battery charge cycle journal entry

General

• Optimized that file uploads are no longer completely buffered in memory before writing them to disk (thanks @bbx0)
• Optimized top right corner menus icon spacing (thanks @TheDodger for the initial work on this)
• Fixed again that some dialogs were not properly (too small) displayed (this time mostly affecting Chrome/Edge)
• Fixed that table states (visible columns, sorting, column order and so on) could be reset to default after not accessing/using the corresponding page for a certain amount of time

v4.2.0-ls257

LinuxServer Changes:

Rebase to Alpine 3.20. Existing users should update their nginx confs to avoid http2 deprecation warnings.

grocy Changes:

Stock

• When using/scanning a stock entry Grocycode on the transfer page, the "Use specific stock item" dropdown (and "From location") is now also prefilled accordingly
• Fixed that for the product's last price stock transactions with an empty or 0 price weren't ignored
• Fixed that when copying a product, the field "Move on open" wasn't copied along

Shopping list

• The shopping lists dropdown on the shopping list page now also shows the number of items on the corresponding shopping list

Recipes

• Optimized that when creating a recipe, the desired serving amount is now initially prefilled by the recipe's base serving amount

Batteries

• It's now possible to track any addtional info on a battery charge cycle by using Userfields (thanks @TheDodger)
  • => Configure the desired Userfields for the entity battery_charge_cycles
  • => The on a battery charge cycle tracking entered information is then visible on the corresponding battery charge cycle journal entry

General

• Optimized that file uploads are no longer completely buffered in memory before writing them to disk (thanks @bbx0)
• Optimized top right corner menus icon spacing (thanks @TheDodger for the initial work on this)
• Fixed again that some dialogs were not properly (too small) displayed (this time mostly affecting Chrome/Edge)
• Fixed that table states (visible columns, sorting, column order and so on) could be reset to default after not accessing/using the corresponding page for a certain amount of time

v4.2.0-ls256

LinuxServer Changes:

Rebase to Alpine 3.20. Existing users should update their nginx confs to avoid http2 deprecation warnings.

grocy Changes:

Stock

• When using/scanning a stock entry Grocycode on the transfer page, the "Use specific stock item" dropdown (and "From location") is now also prefilled accordingly
• Fixed that for the product's last price stock transactions with an empty or 0 price weren't ignored
• Fixed that when copying a product, the field "Move on open" wasn't copied along

Shopping list

• The shopping lists dropdown on the shopping list page now also shows the number of items on the corresponding shopping list

Recipes

• Optimized that when creating a recipe, the desired serving amount is now initially prefilled by the recipe's base serving amount

Batteries

• It's now possible to track any addtional info on a battery charge cycle by using Userfields (thanks @TheDodger)
  • => Configure the desired Userfields for the entity battery_charge_cycles
  • => The on a battery charge cycle tracking entered information is then visible on the corresponding battery charge cycle journal entry

General

• Optimized that file uploads are no longer completely buffered in memory before writing them to disk (thanks @bbx0)
• Optimized top right corner menus icon spacing (thanks @TheDodger for the initial work on this)
• Fixed again that some dialogs were not properly (too small) displayed (this time mostly affecting Chrome/Edge)
• Fixed that table states (visible columns, sorting, column order and so on) could be reset to default after not accessing/using the corresponding page for a certain amount of time

v4.2.0-ls255

LinuxServer Changes:

Rebase to Alpine 3.20. Existing users should update their nginx confs to avoid http2 deprecation warnings.

grocy Changes:

Stock

• When using/scanning a stock entry Grocycode on the transfer page, the "Use specific stock item" dropdown (and "From location") is now also prefilled accordingly
• Fixed that for the product's last price stock transactions with an empty or 0 price weren't ignored
• Fixed that when copying a product, the field "Move on open" wasn't copied along

Shopping list

• The shopping lists dropdown on the shopping list page now also shows the number of items on the corresponding shopping list

Recipes

• Optimized that when creating a recipe, the desired serving amount is now initially prefilled by the recipe's base serving amount

Batteries

• It's now possible to track any addtional info on a battery charge cycle by using Userfields (thanks @TheDodger)
  • => Configure the desired Userfields for the entity battery_charge_cycles
  • => The on a battery charge cycle tracking entered information is then visible on the corresponding battery charge cycle journal entry

General

• Optimized that file uploads are no longer completely buffered in memory before writing them to disk (thanks @bbx0)
• Optimized top right corner menus icon spacing (thanks @TheDodger for the initial work on this)
• Fixed again that some dialogs were not properly (too small) displayed (this time mostly affecting Chrome/Edge)
• Fixed that table states (visible columns, sorting, column order and so on) could be reset to default after not accessing/using the corresponding page for a certain amount of time

v4.2.0-ls254

LinuxServer Changes:

Add clear_env = no to php-fpm to pass on environment variables to workers threads

grocy Changes:

Stock

• When using/scanning a stock entry Grocycode on the transfer page, the "Use specific stock item" dropdown (and "From location") is now also prefilled accordingly
• Fixed that for the product's last price stock transactions with an empty or 0 price weren't ignored
• Fixed that when copying a product, the field "Move on open" wasn't copied along

Shopping list

• The shopping lists dropdown on the shopping list page now also shows the number of items on the corresponding shopping list

Recipes

• Optimized that when creating a recipe, the desired serving amount is now initially prefilled by the recipe's base serving amount

Batteries

• It's now possible to track any addtional info on a battery charge cycle by using Userfields (thanks @TheDodger)
  • => Configure the desired Userfields for the entity battery_charge_cycles
  • => The on a battery charge cycle tracking entered information is then visible on the corresponding battery charge cycle journal entry

General

• Optimized that file uploads are no longer completely buffered in memory before writing them to disk (thanks @bbx0)
• Optimized top right corner menus icon spacing (thanks @TheDodger for the initial work on this)
• Fixed again that some dialogs were not properly (too small) displayed (this time mostly affecting Chrome/Edge)
• Fixed that table states (visible columns, sorting, column order and so on) could be reset to default after not accessing/using the corresponding page for a certain amount of time

v4.2.0-ls253

LinuxServer Changes:

Add clear_env = no to php-fpm to pass on environment variables to workers threads

grocy Changes:

Stock

• When using/scanning a stock entry Grocycode on the transfer page, the "Use specific stock item" dropdown (and "From location") is now also prefilled accordingly
• Fixed that for the product's last price stock transactions with an empty or 0 price weren't ignored
• Fixed that when copying a product, the field "Move on open" wasn't copied along

Shopping list

• The shopping lists dropdown on the shopping list page now also shows the number of items on the corresponding shopping list

Recipes

• Optimized that when creating a recipe, the desired serving amount is now initially prefilled by the recipe's base serving amount

Batteries

• It's now possible to track any addtional info on a battery charge cycle by using Userfields (thanks @TheDodger)
  • => Configure the desired Userfields for the entity battery_charge_cycles
  • => The on a battery charge cycle tracking entered information is then visible on the corresponding battery charge cycle journal entry

General

• Optimized that file uploads are no longer completely buffered in memory before writing them to disk (thanks @bbx0)
• Optimized top right corner menus icon spacing (thanks @TheDodger for the initial work on this)
• Fixed again that some dialogs were not properly (too small) displayed (this time mostly affecting Chrome/Edge)
• Fixed that table states (visible columns, sorting, column order and so on) could be reset to default after not accessing/using the corresponding page for a certain amount of time