Open and convert .dwg
and .dxf
with FreeCAD and ODA File Converter, see:
https://askubuntu.com/a/1136178
- http://www.cubietech.com/
- http://cubieboard.org/
- https://linux-sunxi.org/
- http://cubian.org/
- https://www.armbian.com/download/?tx_maker=cubietech
Release | Schematic | Layout (PCB) | 2D Drawing | 3D Model | Status |
---|---|---|---|---|---|
V1 | SJ-019 V3.0 | ||||
V2 | SJ-019 V6.0 | ||||
V3 | SJ-039 V1.0 |
Component | Manufactor | Name | V1/2/3 | Package | Refs |
---|---|---|---|---|---|
USB to Serial Bridge Controller, 3.3/5V, USB 1.1 | Prolific | PL2303HX | U1 |
SSOP28-0.65mm | IMG |
UART 3.3V TTL wires | CubieBoard 1&2 connection |
Release | Schematic | Layout (PCB) | 2D Drawing | 3D Model | Status |
---|---|---|---|---|---|
V1 | 2012-09-09 | DXF (PDF) | EOL |
Component | Manufactor | Name | V1 | Package | Refs |
---|---|---|---|---|---|
Central Procesing Unit (CPU), ARM Cortex-A8 @ 1GHz | Allwinner | A10 | U1 |
FBGA441-0.8mm | IMG |
Random Access Memory (DDR3-SDRAM), 512MB @ 480MHz | GT | GT8UB128M16BP | U2 , U3 |
FBGA96-0.8mm | |
Random Access Memory (DDR3-SDRAM), 1GB @ 480MHz | GT8UB256M16BP | IMG | |||
NAND Technology Flash (NAND-Flash), 4GB | Samsung | K9K8G08U0A | U4 |
TSOP48-0.5mm | |
K9GBG08U0A | IMG | ||||
Power Management IC (PMIC), Li-Battery Charger | X-Powers | AXP209 | U6 |
QFN48-0.4mm | IMG |
Step Down Regulator, 1.5V (DDR3), 3.3V (I/O) | TCS4199 | U5 , U7 |
SOT23-5 | ||
LDO Voltage Regulator, 2.5V (SATA) | TCS | TCS2108-25 | U8 |
SOT25-0.95mm | |
Chipown | AP1231 | ||||
pMOSFET 2.5-V (G-S) 1A, 5V (SATA), 3.3V (EMAC) | TCS | TCS1305 | Q1 , Q6 |
SOT23-0.95mm | IMG |
Low RDS(ON) Load Switch, VBUS USB Host, USB OTG | TCS | TCS9708 | U10 - U12 |
SOT23-5-0.95mm | |
10/100M Fast Ethernet PHY Receiver (EMAC) | Realtek | RTL8201CP | U13 |
LQFP48-0.5mm | IMG |
IR Receiver | Vishay | HS0038B-NEC | U9 |
CubieBoard 1 - top (component side) - bottom (print/solder side) |
- http://www.cubietech.com/product-detail/cubieboard1
- https://linux-sunxi.org/Cubietech_Cubieboard
- https://hands.com/~lkcl/eoma/allwinner
- https://github.com/allwinner-zh/documents
- https://github.com/SoM-Boards
❗TTL 3.3V❗ |
---|
⮕ console=ttyS0,115200n8 |
- https://linux-sunxi.org/Cubietech_Cubieboard#Adding_a_serial_port
- http://linux-sunxi.org/Cubieboard/TTL
- http://linux-sunxi.org/UART#UART-USB_dongle
- https://www.armbian.com/cubieboard-1/ (End of Support)
Release | Schematic | Layout (PCB) | 2D Drawing | 3D Model | Status |
---|---|---|---|---|---|
V1 | 2012-09-09 | DXF (PDF) | EOL | ||
V2 | 2015-12-11 | STP (PDF) |
Component | Manufactor | Name | V1 (EOL) | V2 | Package | Refs |
---|---|---|---|---|---|---|
Central Procesing Unit (CPU), ARM Cortex-A7 @ 1GHz | Allwinner | A20 | U1 |
U1 |
FBGA441-0.8mm | IMG |
Random Access Memory (DDR3-SDRAM), 1GB @ 480MHz | GT | GT8UB256M16BP | U2 , U3 |
7U1 , 7U2 |
FBGA96-0.8mm | IMG |
Hynix | H5TQ4G63AFR | IMG | ||||
NAND Technology Flash (NAND-Flash), 4GB | Hynix | H27UBG8T2BTR | U4 |
U2 |
TSOP48-0.5mm | IMG |
NAND Technology Flash (NAND-Flash), 8GB | H27UCG8T2BTR | |||||
2nd SD Card | CARD2 |
IMG | ||||
TSOP SD (tSD) Card (1.1/2.0) NAND Flash, 4G | Foresee | NCTSTS86-04G | IMG | |||
embedded Multi Media Card (eMMC) NAND Flash, 4G | Foresee | NCEFEH58-08G | U20A |
FBGA169-0.5mm | IMG | |
Power Management IC (PMIC), Li-Battery Charger | X-Powers | AXP209 | U6 |
12U2 |
QFN48-0.4mm | IMG |
Step Down Regulator, 1.5V (DDR3), 3.3V (I/O) | GMT | G5725 | 12U1 , 12U3 |
SOT23-5-0.95mm | ||
Step Down Regulator, 1.5V (DDR3), 3.3V (I/O) | TCS4199 | U5 , U7 |
SOT23-5 | |||
LDO Voltage Regulator, 2.5V (SATA) | TCS | TCS2108-25 | U8 |
12U4 |
SOT25-0.95mm | |
Chipown | AP1231 | |||||
pMOSFET 2.5-V (G-S) 2A, 5V (SATA) | AOSMD | AO3423 | 9Q4 |
SOT23-0.95mm | IMG | |
pMOSFET 2.5-V (G-S) 1A, 5V (SATA), 3.3V (EMAC) | TCS | TCS1305 | Q1 , Q6 |
SOT23-0.95mm | IMG | |
Low RDS(ON) Load Switch, VBUS USB Host | TCS | TCS9708 | U10 , U11 |
U4 , U5 |
SOT23-5-0.95mm | |
Low RDS(ON) Load Switch, VBUS USB OTG | Silergy | SY6280 | U6 |
SOT23-5-0.95mm | ||
TCS | TCS9708 | U12 |
||||
10/100M Fast Ethernet PHY Receiver (EMAC) | Realtek | RTL8201CP | U13 |
U8 |
LQFP48-0.5mm | IMG |
IR Receiver | Vishay | HS0038B | U3 |
|||
HS0038B-NEC | U9 |
CubieBoard 2 - top (component side) - bottom (print/solder side) |
- How To Distinguish Your CubieBoard 2 Version
- http://www.cubietech.com/product-detail/cubieboard2
- http://www.cubietech.com/product-detail/cubieboard2-dualcard
- https://linux-sunxi.org/Cubietech_Cubieboard2
- https://github.com/allwinner-zh/documents
❗TTL 3.3V❗ |
---|
⮕ console=ttyS0,115200n8 |
- https://linux-sunxi.org/Cubietech_Cubieboard2#Adding_a_serial_port
- http://linux-sunxi.org/Cubieboard/TTL
- http://linux-sunxi.org/UART#UART-USB_dongle
- https://www.armbian.com/cubieboard-2/ (End of Support)
Release | Schematic | Layout (PCB) | 2D Drawing | 3D Model | Status |
---|---|---|---|---|---|
V1 | V1.0-0606 | DWG (PDF) | EOL | ||
V2 | V2.0-20180303 |
Component | Manufactor | Name | V1 (EOL) | V2 | Package | Refs |
---|---|---|---|---|---|---|
Central Procesing Unit (CPU), ARM Cortex-A7 @ 1GHz | Allwinner | A20 | 1U1 |
1U1 |
FBGA441-0.8mm | IMG |
Random Access Memory (DDR3-SDRAM), 1GB @ 480MHz | GT | GT8UB256M8BN | 1U2 - 1U5 |
1U2 - 1U5 |
FBGA78-0.8mm | |
Samsung | K4B1G0846E | |||||
Random Access Memory (DDR3-SDRAM), 2GB @ 480MHz | GT | GT8UB512M8BP | IMG | |||
Hynix | H5TQ4G83AFR | IMG | ||||
NAND Technology Flash (NAND-Flash), 8GB | Hynix | H27UCG8T2BTR | U4 |
U4 |
TSOP48-0.5mm | IMG |
TSOP SD (tSD) Card (1.1/2.0) NAND Flash, 8G | Foresee | NCTSTS76-08G | IMG | |||
embedded Multi Media Card (eMMC) NAND Flash, 8G | Foresee | NCEMAM6G-08G | U39A |
FBGA169-0.5mm | IMG | |
Power Management IC (PMIC), Li-Battery Charger | X-Powers | AXP209 | U9 |
U9 |
QFN48-0.4mm | IMG |
Step Down Regulator, 1.5V (DDR3), 3.3V (I/O) | TCS4199 | U7 , U8 |
U7 , U8 |
SOT23-5 | ||
LDO Voltage Regulator, 2.5V (SATA) | TCS | TCS2108-25 | U10 |
U10 |
SOT25-0.95mm | |
pMOSFET 2.5-V (G-S) 1A, 5V (SATA) | TCS | TCS1305 | Q1 |
Q1 |
SOT23-0.95mm | IMG |
Low RDS(ON) Load Switch, VBUS USB Host | TCS | TCS9708 | U13 , U14 |
U13 , U14 |
SOT23-5-0.95mm | |
Low RDS(ON) Load Switch, VBUS USB OTG | Silergy | SY6280 | OU2 |
SOT23-5-0.95mm | ||
TCS | TCS9708 | OU2 |
||||
10/100/1000M Ethernet (GbE) PHY Receiver (EMAC) | Realtek | RTL8211E | U15 |
U15 |
QFN48-0.4mm | IMG |
WiFi 1T1R 802.11bgn + BT4.0 (SDIO v2.0, UART/PCM) | AMPAK | AP6210 SiP | U5 |
U5 |
QFN44-0.9mm | IMG |
Broadcom | CYW43362 WL | |||||
CYW20710 BT | ||||||
IR Receiver | Vishay | HS0038B | U12 |
U12 |
CubieBoard 3 - CubieTruck - top (component side) |
- How to use CubieTruck TSD Version
- http://www.cubietech.com/product-detail/cubieboard3
- https://linux-sunxi.org/Cubietech_Cubietruck
- https://github.com/allwinner-zh/documents
❗TTL 3.3V❗ |
---|
⮕ console=ttyS0,115200n8 |
- https://linux-sunxi.org/Cubietech_Cubietruck#Adding_a_serial_port
- http://linux-sunxi.org/Cubieboard/TTL
- http://linux-sunxi.org/UART#UART-USB_dongle
- https://www.armbian.com/cubietruck/ (Supported)
- https://www.solid-run.com/
- https://wiki.solid-run.com/
- https://developer.solid-run.com/
- http://forum.solid-run.com/
- https://community.nxp.com/community/imx
- http://freescale.github.io/
- https://www.armbian.com/download/?tx_maker=solidrun
- https://xbian.org/getxbian
µSOM based on NXP i.MX6
Release | Schematic* | Layout (PCB) | 2D Drawing | 3D Model | Status |
---|---|---|---|---|---|
V1.1 | EOL | ||||
V1.2 | EOL | ||||
V1.3 | 2015-04-30 | STP (PDF) | EOL | ||
V1.4 | EOL | ||||
V1.5 | 2016-10-26 | STP (PDF) |
*NOTE: All schematics are simplified and coming without DDR3-SDRAM and core voltage regulator!
Parts of the V1.3(2) schematic seems to were borrowed from the WandBoard SOM reference design WBQUAD REV B1 (20130620). That are:
- WiFi + BT SiP USI WM-BN-BM-02
-- EOL (long long time ago)
- Today it is impossible to find the right documentation for this component.
- Further this component was already replaced in latest WandBoard SOM reference design WB-EDM-iMX6 REV C1 (20140317) with the WiFi + BT SiP WM-BN-BM-04, based on BCM4330.
Component | Manufactor | Name | V1.3 (EOL) | V1.5 | Package | Refs |
---|---|---|---|---|---|---|
Central Procesing Unit (CPU), ARM Cortex-A9 @ 1GHz | NXP | MCIMX6(S,U,D,Q)XX | U1 |
U1 |
FBGA624-0.8mm | |
Random Access Memory (DDR3-SDRAM), 512MB | Samsung | K4B2G1646E | U4001 - U4002 |
U4001 - U4002 |
FBGA96-0.8mm | only uSOM i1 |
Random Access Memory (DDR3-SDRAM), 1GB | Samsung | K4B2G1646E | U4001 - U4004 |
U4001 - U4004 |
FBGA96-0.8mm | only uSOM i2 |
Random Access Memory (DDR3-SDRAM), 1GB | Samsung | K4B2G1646Q | U4001 - U4004 |
U4001 - U4004 |
FBGA96-0.8mm | only uSOM i2eX |
Random Access Memory (DDR3-SDRAM), 2GB | Samsung | K4B4G1646B | U4001 - U4004 |
U4001 - U4004 |
FBGA96-0.8mm | only uSOM i4Pro |
embedded Multi Media Card (eMMC) NAND Flash, 8GB | Samsung | KLM8G1GETF-B041 | U10003 |
FBGA153-0.5mm | ||
embedded Multi Media Card (eMMC) NAND Flash, 4GB | KLM4G1FEPD-B031 | |||||
IIC/I2C EEPROM (typically not populated), 128Byte | ONSemi | CAT24AA01 | U9002 |
TSOT23-5-0.95mm | I2C3 @ 0x50 |
|
SPI Serial NOR Flash, 128MB @ 100/50MHz | Micron | N25Q00AA | U17 |
LBGA24-1.0mm | SPI3 @ CS0 |
|
Step Down DC-DC Regulator, unsure: 1.35V (DDR3) | Richtek | RT8070ZQW | U10000 |
U10000 |
WDFN-8L-0.65mm | SRF2 |
Step Down DC-DC Regulator, unsure: 1.325V (CPU) | Richtek | RT8073GQW | U10001 |
U10001 |
WDFN-12L-0.45mm | SRF1, SRF2 |
LDO Voltage Regulator, 2.8V (WiFi SDIO max. 2.98V) | Diodes | AP7333-28SRG | U2001 |
SOT23R-0.95mm | only on BCM4330 | |
LDO Voltage Regulator, 2.5V (WiFi SDIO max. 2.98V) | TWS | TS9011KCX | SOT23-0.95mm | |||
LDO Voltage Regulator, 1.8V (WiFi SDIO max. 2.1V) | TWS | TS9011DCX | U2001 |
SOT23-0.95mm | only on WL18xx | |
Level Shifter 1.8/3.3V (BT UART Rx/Tx) | NXP | NTB0102GD | U31 |
SOT996-2-0.5mm | only on WL18xx | |
10/100/1000M Ethernet (GbE) PHY Receiver (EMAC) | Atheros | AR8035-AL1A | U7000 |
U7000 |
QFN40-0.4mm | |
WiFi 1T1R 802.11bgn + BT2.1 (SDIO v1.2, UART/PCM) | USI | WM-BN-BM-02 SiP | U10002 |
QFM63-0.55mm | not U6002 |
|
Broadcom | BCM4329 WL+BT+FM | |||||
WiFi 1T1R 802.11bgn + BT4.0 (SDIO v2.0, UART/PCM) | AzureWave | AW-NH660 SiP | U6002 |
LGA81-X.Xmm | not U10002 |
|
Broadcom | BCM4330 WL+BT+FM | |||||
WiFi xTxR 802.11bgn + BT4.1 (SDIO v3.0, UART/PCM) | TI | WiLink8 SiP | U10002 |
QFM100-0.7mm | ||
WL1837MOD | MIMO WiFi+BTLE | |||||
WL1831MOD | SISO WiFi+BTLE | |||||
nMOSFET 2.0-V (G-S) Dual Channel 3.3/5V (HDMI DDC) | Diodes | DMN65D8LDW-7 | U3000 |
U3000 |
SOT363-0.65mm | |
CMOS Logic AND, Level Shifter 3.3/5V (HDMI HPD) | ONSemi | M74VHC1GT08DFT1G | U3003 |
U3003 |
SOT353-0.65mm |
SR-uSOM-MX6 - top (component side) | SR-uSOM-MX6 - bottom (print/solder side) |
SR-uSOM-MX6 - i1 / i2 / i2eX / i4Pro | SR-uSOM-MX6 - heatsink |
- https://www.solid-run.com/nxp-family/imx6-som
- https://developer.solid-run.com/products/imx6-som
- https://developer.solid-run.com/article-categories/i-mx6-som
- http://forum.solid-run.com/i-mx6-based-microsom-sr-usom-mx6-f19
Release | Schematic | Layout* (PCB) | 2D Drawing | 3D Model | Status |
---|---|---|---|---|---|
V1.2 | DSN (PDF) | GDO (CS PS) | DXF (PDF) | EOL | |
V1.4 | PRJ (CS PS) | STP (PDF) |
*HINT: PRJ - OrCAD project, GDO - Gerber, CS - component side (PDF), PS - print/solder side (PDF)
Component | Manufactor | Name | V1.2 (EOL) | V1.4 | Package | Refs |
---|---|---|---|---|---|---|
embedded Multi Media Card (eMMC) NAND Flash, 8GB | Samsung | KLM8G1GETF-B041 | U10001 |
U10001 |
FBGA153-0.5mm | |
embedded Multi Media Card (eMMC) NAND Flash, 4GB | KLM4G1FEAC-B031 | |||||
I2S DSP Analog Audio Codec with Headphone Amp | NXP | SGTL5000XNAA3/R2 | U4 |
U4 |
QFN32-0.5mm | |
4 Port USB 2.0 Hub Controller (HX2VL) | Cypress | CY7C65632-28LTXC | U7 |
QFN28-0.5mm | ||
4 Port USB 2.0 Hub Controller | Microchip | USB2514BI-AEZG | U10004 |
QFN36-0.5mm | ||
IIC/I2C Real-Time Clock (RTC) and calendar | NXP | PCF8523T/1,118 | U16 |
U16 |
SOT96-1-1.27mm | I2C1 @ 0x68 |
IIC/I2C 12-Bit 4-Ch MUX-Input SAR ADC | TI | ADS7924IRTER | U13 |
U13 |
WQFN16-0.5mm | |
Step Down DC-DC Regulator, 3.2V and 5V (BOARD) | Richtek | RT2875BQGCP | U23 , U24 |
U23 , U24 |
TSSOP14-0.65mm | |
LDO Voltage Regulator, 1.5V (miniPCIE) | TWS | TS9011ACX | U6 |
U6 |
SOT23-0.95mm | |
LDO Voltage Regulator, 1.8V (AUDIOCODEC max. 1.9V) | TWS | TS9011DCX | U20 |
U20 |
SOT23-0.95mm | opt: SD Card |
Microchip | MCP1700T-1802E/TT | |||||
Dual Channel Power Switch (500mA USB 1 - 4) | Micrel | MIC2026-1YM | U9 , U22 |
U9 , U22 |
SOIC8-1.27mm | max. 350mA/USB |
Diodes | AP2162ASG-13 | NOT pin-comp. | ||||
CMOS Dual Non-Inverting Buffer (RS-232 CONSOLE) | ONSemi | NLX2G16AMX1TCG | U3 |
U3 |
UDFN6-0.5mm | 7V protection |
- https://www.solid-run.com/nxp-family/hummingboard
- https://developer.solid-run.com/products/hummingboard-gate-edge
- https://developer.solid-run.com/article-categories/hummingboard-gate-edge
- http://forum.solid-run.com/hummingboard-hardware-lab-f18
❗TTL 3.3V❗ |
---|
⮕ console=ttymxc0,115200n8 |
- https://developer.solid-run.com/knowledge-base/hummingboard-gate-edge-uart-console
- https://developer.solid-run.com/knowledge-base/serial-console-usb-uart