Display not showing the correct windows while running this example

[TheElectronicMusicProject]

I'm using a 1.8TFT SPI 128x160 display.
I also use develop/lvgl_7.11.0_idf_5.0 for lvgl_esp32_drivers and v7.11.0 for lvgl.

Describe the issue
I use the following connections:

• PIN LED to 3.3V
• PIN SCK to GPIO14
• PIN SDA to GPIO13
• PIN A0 to GPIO2
• PIN RESET to GPIO4
• PIN CS to GPIO15
• PIN GND to ground
• PIN VCC to 5V

Running the example I don't see the correct result on the screen.

Code to reproduce the issue
The given example with the following sdkconfig where I matched the pins and the display resolution

Expected Results
The windows shown in the example

Actual Results
I see this picture on the screen with fluctuations of the content but it doesn't work.

In the serial monitor I don't notice anything "strange":

I (0) cpu_start: App cpu up.
I (297) cpu_start: Pro cpu start user code
I (297) cpu_start: cpu freq: 160000000
I (297) cpu_start: Application information:
I (301) cpu_start: Project name:     lvgl-demo
I (306) cpu_start: App version:      v2.0-68-gcffa173-dirty
I (313) cpu_start: Compile time:     Apr 24 2023 17:00:46
I (319) cpu_start: ELF file SHA256:  d5d3d50c2a493b36...
I (325) cpu_start: ESP-IDF:          -128-NOTFOUND
I (330) cpu_start: Min chip rev:     v0.0
I (335) cpu_start: Max chip rev:     v3.99
I (340) cpu_start: Chip rev:         v1.0
I (345) heap_init: Initializing. RAM available for dynamic allocation:
I (352) heap_init: At 3FFAE6E0 len 00001920 (6 KiB): DRAM
I (358) heap_init: At 3FFBAD68 len 00025298 (148 KiB): DRAM
I (364) heap_init: At 3FFE0440 len 00003AE0 (14 KiB): D/IRAM
I (370) heap_init: At 3FFE4350 len 0001BCB0 (111 KiB): D/IRAM
I (377) heap_init: At 4008D2A0 len 00012D60 (75 KiB): IRAM
I (384) spi_flash: detected chip: generic
I (388) spi_flash: flash io: dio
I (393) cpu_start: Starting scheduler on PRO CPU.
I (0) cpu_start: Starting scheduler on APP CPU.
I (40) lvgl_helpers: Display hor size: 128, ver size: 160
I (40) lvgl_helpers: Display buffer size: 5120
I (40) lvgl_helpers: Initializing SPI master for display
I (50) lvgl_helpers: Configuring SPI host HSPI_HOST (1)
I (60) lvgl_helpers: MISO pin: -1, MOSI pin: 13, SCLK pin: 14, IO2/WP pin: -1, IO3/HD pin: -1
I (60) lvgl_helpers: Max transfer size: 10240 (bytes)
I (70) lvgl_helpers: Initializing SPI bus...
I (80) disp_spi: Adding SPI device
I (80) disp_spi: Clock speed: 40000000Hz, mode: 0, CS pin: 15
I (90) gpio: GPIO[2]| InputEn: 0| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:0
I (100) gpio: GPIO[4]| InputEn: 0| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:0
I (320) ILI9341: Initialization.
I (540) ILI9341: Display orientation: PORTRAIT
I (540) ILI9341: 0x36 command value: 0x48

ESP-IDF version
I use ESP-IDF v4.4.4-336-g4b404115e8

Development kit used
ESP32-WROOM-32

Development machine OS
Windows 11

Compilation warnings/errors (if available)
Yes, some warnings at the bottom of the log.
lvgl_log_build.txt

If possible, copy the compilation log into a file and attach it here

1. Is this display supported?
2. If yes, what kind of error I'm encountering?
3. Is there a way to fix it?

Thank you for your help

[CE3kmacriver]

Your Display looks like mine does if I try to put the SPI frequency too high. Try backing it off.

[TheElectronicMusicProject]

@CE3kmacriver I posted this issue here, they said I should use another driver for this display. I looked for the ST7735S but it gives errors while compiling..