Grid Consumption and Return to grid

[0superolo0]

I have a problem with adding the Grid consumption and return to grid to HA. I attached a screenshot with error.
Thank you in advance.

HA version:
2023.7.3

foxess-ha version:
v0.31

[Kepro]

use FoxESS - Energy Generated for solar production

[0superolo0]

use FoxESS - Energy Generated for solar production

The solar production is displayed. The problem are the errors in the orange.

[Kepro]

yes, because you're reading it from incorrect place, it was working before? or it was not working from beginning? check other sensors

[0superolo0]

yes, because you're reading it from incorrect place, it was working before? or it was not working from beginning? check other sensors

It wasn't working from the beginning.

[Kepro]

then again, check other sensors and use sensor that have valid data

[0superolo0]

Other sensor have valid data but I would like to know the grid consumption and resfeatures too.

[0superolo0]

Other sensor have valid data but I would like to know the grid return and consumption too.

[Kepro]

show screenshot from foxcloud or mobile app if you see that there

[0superolo0]

[Kepro]

and you don't have same value in HA? on some sensor?

[0superolo0]

Other sensors show correct value but this one gives error like on the image above.

[Lat91]

Same issue here. It's been working fine for months but upgraded ha core and this plug-in and now I have this issue. Will try and debug it soon unless anyone has the answer ?

[Kepro]

just use feedin power and grid consumption power

[Lat91]

Not a bug in the plug-in; I had to contact my installer as the Fox maintenance on 7th August had stopped my cat clamp from working. They remotely re-enabled it and voila, I have data on those sensors again.

[0superolo0]

just use feedin power and grid consumption power

How do I do that? It doesn't let me select it.

[pkasarda]

can you share guys what sensors do you see in your HA?

[kamyk]

Hello,

I have the same issue. I can not choose anything what gives me a correct value in that place:

FoxESS - FeedIn give me correct value in entity dashboard

but when I set it up I see that error too:

Thank you for your help!

[laura1050]

I had the same problem whereby feedin and grid consumption sensors from the foxess integration have always shown as unknown. I assumed it was because I have an old grid tied inverter (F3600). I had to create a rieman sum integral helper to calculate the value of feedin in kwH based on input sensor
sensor.foxess_feedin_power. That gives me a value in kwH that I added to the energy stats page. Unfortunately I don't know how to get the yaml code for the helper to show you

f you have a sensor that returns instantaneous power readings (W or kW), then to add a sensor that returns energy usage or generation (kWh), refer to the Riemann sum integral integration.