Print-O-Matic RAFT defaults to ON

[dgwilson]

In 0029 (possibly earlier) and in 0029 beta r2 the print-o-matic setting for RAFT is always ON. Changes to this setting are not remembered between Generation of GCode for objects.

Not sure if this is an intended feature or a consequence of upgrading from previous versions?

[FarMcKon]

dg,
Thanks for the heads-up. We've seen reports of this both as 'is always on' and 'always off' There might be a couple of things going on here, and we've talked to support to help walk through sussing out the problem.
Have you thrown an email at [email protected]?

[dgwilson]

On 19/12/2011, at 12:34 PM, Far McKon wrote:

dg,
Thanks for the heads-up. We've seen reports of this both as 'is always on' and 'always off' There might be a couple of things going on here, and we've talked to support to help walk through sussing out the problem.
Have you thrown an email at [email protected]?

Hi there….

I have NOT had a discussion with [email protected]

As SF44 is experimental…. I imagined it to be outside of something they would provide direct support on, thus though the best approach to be submitting a bug report straight via github.

If I can provide more assistance… I'm happy to.

• David

David G. Wilson
http://dgwilson.wordpress.com
http://homepages.paradise.net.nz/dgwilson/