The Camera Quick Clamp is an 3D printed adapter for attaching an assistive device to a section of 1/2 inch PVC piping. The clamp has a ¼”- 20 UNC camera thread stud that is compatible with various assistive devices and/or camera mount adapters. The clamp can easily be installed, adjusted, and removed by hand. The Camera Quick Clamp is part of the PVC Assistive Mounting System (PAMS).
The PVC Assistive Mounting System is a collection of readily available commercial-off-the-shelf components and 3D printed components that can be assembled into various configurations to provide mounting solutions for assistive technology.
| Document | Version | Link |
|---|---|---|
| Design Specification | WIP | |
| Design Rationale | WIP | |
| Bill of Materials | WIP | |
| Assembly Guide | 0.1 | Camera_Quick Clamp_Assembly_v0.1 |
| Maker Checklist | 0.1 | Camera_Quick_Clamp_Checklist_v0.1 |
| User Guide | 0.1 | Camera_Quick_Clamp_UserGuide_v0.1 |
| Changelog | WIP |
The snap latch mechanism was inspired by NASA CHAMP CLAMP (Strong man) by Jonathan Brazeau.
PAMS Camera Quick Clamp by Neil Squire is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Makers Making Change is an initiative of Neil Squire, a Canadian non-profit that helps people with disabilities.
We are committed to creating a network of volunteer makers who support people with disabilities in their communities through 3D printing assistive devices. Check out our library of free, open-source assistive technologies with parts and build instructions.
- www.MakersMakingChange.com
- GitHub
- Thingiverse
- Twitter: @makermakechange
- Instagram: @makersmakingchange
For technical questions, to get involved, or share your experience we encourage you to visit the MMC Project Page, MMC Forum, or contact [email protected]