Testing Toolkit

🏗 A set of CLIs, tools and tests to set up, manage and operate Polygon devnets.

The Testing Toolkit is built on top of express-cli, an extension of matic-cli which uses terraform to deploy, test and monitor any devnet on AWS/GCP stacks from any local system.

It currently supports only devnets running v0.3.x stacks.

The express-cli interacts with terraform to create a fully working setup on AWS/GCP. In case the infrastructure already exists, matic-cli can be used as a standalone tool to deploy Polygon stacks on pre-configured VMs.

Please, refer to the section of this file you are more interested in (express-cli or matic-cli)

`express-cli`

Requirements

To use the express-cli you have to execute the following steps.

install aws cli or install gcloud tool
install terraform on your local machine
use nvm to switch to the proper node version, v18.19.0, by running nvm use from the root folder
install express-cli and matic-cli locally with command npm i
generate a keypair on AWS EC2 (in the same region being used, currently eu-west-1 by default and download its certificate locally (.pem file). If you are on GCP, you can use your existing keypair or use ssh-keygen to generate. Check the GCP guide.
copy secret.tfvars.example to secret.tfvar with command cp secret.tfvars.example secret.tfvars and check the commented file for details
If you are a Polygon employee, connect to the company VPN
modify secret.tfvar with addresses of the allowed IPs (as specified in secret.tfvars.example file)
copy .env.example to .env with command cp .env.example .env and check the heavily commented file for details. If you're using GCP, you can ignore AWS specific terraform variables and vice versa.
make sure PEM_FILE_PATH points to a correct AWS key certificate, the one you downloaded in the previous steps
define the number of nodes (TF_VAR_VALIDATOR_COUNT and TF_VAR_SENTRY_COUNT) and adjust the DEVNET_BOR_USERS accordingly
use TF_VAR_DOCKERZIED=no to have one VM per node, otherwise the stack will run on one VM only in a dockerized environment
(optional) replace TF_VAR_VM_NAME with your own identifier (it can be any string, default is "polygon-user")
(optional) replace TF_VAR_DISK_SIZE_GB with your preferred disk size in GB (default is 100 GB)
VERBOSE=true prints logs from the remote machines. If set to false, only express-cli and matic-cli logs will be shown

Auth Configuration

As a prerequisite, you need to configure authentication on aws This will create the folder ~/.aws in your system To do so, please run

aws configure sso

This command will interactively ask for some configs If you are a Polygon employee, please use the following

SSO session name: leave empty
SSO start URL: https://0xpolygon.awsapps.com/start/#/
SSO region: eu-west-1

The browser will open and authorize your request. Please allow it.

In case there are multiple accounts available to you, please select

posv1-devnet

Then, the command will ask for other configs, please use

CLI default client Region: eu-west-1
CLI default output format: json
CLI profile name: default

Note that it's mandatory to use CLI profile name: default, as used by terraform in express-cli (for more context see this)

Here an output example

SSO session name (Recommended):
WARNING: Configuring using legacy format (e.g. without an SSO session).
Consider re-running "configure sso" command and providing a session name.
SSO start URL [None]: https://0xpolygon.awsapps.com/start/#/
SSO region [None]: eu-west-1
Attempting to automatically open the SSO authorization page in your default browser.
If the browser does not open or you wish to use a different device to authorize this request, open the following URL:

https://device.sso.eu-west-1.amazonaws.com/

Then enter the code:

<CODE-HERE>

There are 2 AWS accounts available to you.

Using the account ID <ACCOUNT_ID>
The only role available to you is: <AWSRole> (<AWS_ROLE_ID>)
Using the role name "<AWS_ROLE>"
CLI default client Region [None]: eu-west-1
CLI default output format [None]: json
CLI profile name [<PROFILE_NAME_AND_ID>]: default

To use this profile, specify the profile name using --profile, as shown:

aws s3 ls --profile default

Now you can log into aws by running the following command. It needs to be executed every time the token expires.

aws sso login

Congrats! You're all set to use express-cli commands.

If you are using Google cloud platform, you need to configure authentication on gcloud.

If you have downloaded the service account credentials, you can use the GOOGLE_APPLICATION_CREDENTIALS environment variable to provide the location of that credential JSON file.

gcloud auth application-default login

# OR

export GOOGLE_APPLICATION_CREDENTIALS='/absolute/path/to/sa/creds.json'

Commands

Instructions to run express-cli. For the list of commands, please run express-cli --help First off, you need to --init terraform on your local machine, by executing the following command.

./bin/express-cli.js --init <aws|gcp>
- Initializes a new devnet folder with terraform and creates some git-ignored files locally. This step is mandatory before running any other command. The new devnet folder created will be devnet-<id> where id is a monotonically increasing count for the devnets. Once created, you can cd deployments/devnet-<id> and run the other commands. This allows you to work with multiple devnets at once. Then, a remote devnet can be created with the --start command, as follows.
- You should specify the cloud provider. Currently the supported values are aws and gcp.
../../bin/express-cli.js --start
- Creates the desired remote setup, based on the preferences defined in the .env.devnet<id> file
- --start command can be used also to target an existing AWS setup. If changes to .env.devnet<id> file are detected, the previous devnet will be destroyed and a new one created, reusing the same AWS VMs To destroy the remote devnet, you can execute the --destroy command.
../../bin/express-cli.js --destroy
- Destroys the remote setup and delete the dedicated VMs

The express-cli also comes with additional utility commands, listed below. Some of them are only available for non-dockerized devnets.

../../bin/express-cli.js --update-all [index]
- Fetches heimdall,bor and erigon branches defined as HEIMDALL_BRANCH, BOR_BRANCH and ERIGON_BRANCH in .env. devnet<id> file, pulls relative changes and restarts those services on the remote machines. If an integer index is used, the job will be performed only on the VM corresponding to that index. For example if the devnet consists of 2 bor and erigon nodes, then the indices for bor machines would be 0 and 1 and for erigon it'll be 2 and 3.
../../bin/express-cli.js --update-bor [index]
- Fetches bor branch defined as BOR_BRANCH in .env.devnet<id> file, pulls relative changes and restarts it on the remote machines. If an integer index is used, the job will be performed only on the VM corresponding to that index.
../../bin/express-cli.js --update-erigon [index]
- Fetches erigon branch defined as ERIGON_BRANCH in .env.devnet<id> file, pulls relative changes and restarts it on the remote machines. If an integer index is used, the job will be performed only on the VM corresponding to that index. For example, if the devnet consists of 2 bor and erigon nodes and you want to target the first erigon node, index will be 2.
../../bin/express-cli.js --update-heimdall [index]
- Fetches heimdall branch defined as HEIMDALL_BRANCH in .env.devnet<id> file, pulls relative changes and restarts it on the remote machines. If an integer index is used, the job will be performed only on the VM corresponding to that index. For example if the devnet consists of 2 bor and erigon nodes, then the indices for bor machines would be 0 and 1 and for erigon it'll be 2 and 3.
../../bin/express-cli.js --restart-all [index]
- Restarts bor, erigon and heimdall on all the remote machines. If an integer index is used, the job will be performed only on the VM corresponding to that index. For example if the devnet consists of 2 bor and erigon nodes, then the indices for bor machines would be 0 and 1 and for erigon it'll be 2 and 3.
../../bin/express-cli.js --restart-bor [index]
- Restarts bor on all the remote machines. If an integer index is used, the job will be performed only on the VM corresponding to that index.
../../bin/express-cli.js --restart-erigon [index]
- Restarts erigon on all the remote machines. If an integer index is used, the job will be performed only on the VM corresponding to that index. For example if the devnet consists of 2 bor and erigon nodes and you wanted to target the first erigon node, index will be 2.
../../bin/express-cli.js --restart-heimdall [index]
- Restarts heimdall on all the remote machines. If an integer index is used, the job will be performed only on the VM corresponding to that index. For example if the devnet consists of 2 bor and erigon nodes, then the indices for bor machines would be 0 and 1 and for erigon it'll be 2 and 3.
../../bin/express-cli.js --cleanup
- Cleans up ganache, bor, heimdall and bridge, redeploys all the contracts and restarts all the services The express-cli also provides additional testing commands, listed here.
../../bin/express-cli.js --send-state-sync
- Create a state-sync transaction on the remote network
../../bin/express-cli.js --send-staked-event [validatorID]
- Create a Staked transaction on the remote network and adds a new validator.
../../bin/express-cli.js --send-stakeupdate-event [validatorID]
- Create a StakeUpdate transaction on the remote network and increase stake of 1st validator by 100 MATIC.
../../bin/express-cli.js --send-signerchange-event [validatorID]
- Create a SignerChange transaction on the remote network and changes the signer of the 1st validator.
../../bin/express-cli.js --send-topupfee-event [validatorID]
- Create a TopUpFee transaction on the remote network and adds balance/heimdallFee for the first validator on Heimdall.
../../bin/express-cli.js --send-unstakeinit-event [validatorID]
- Create a UnstakeInit transaction on the remote network and removes the validator from validator-set. validatorID can be used to specify the validator to be removed. If not specified, the first validator will be removed.
../../bin/express-cli.js --monitor [exit]
- Monitors the reception of state-syncs and checkpoints to make sure the whole network is in a healthy state. If --send-state-sync hasn't been used before, only checkpoints will be detected. Monitor the setup. If exit string is passed the process terminates when at least one stateSync and one checkpoint are detected.
../../bin/express-cli.js --instances-stop
- Stop the cloud VM instances associated with the deployed devnet.
../../bin/express-cli.js --instances-start
- Start the (previously stopped) VM instances associated with the deployed devnet. Also, it starts all services, such as ganache, heimdall, and bor
../../bin/express-cli.js --stress [fund]
- Runs the stress tests on remote nodes. The string fund is needed when stress tests are ran for the first time, to fund the accounts
../../bin/express-cli.js --setup-datadog
- Sets up datadog on the nodes and gets them ready to send metrics to Datadog Dashboard. DD_API_KEY env var is required for this.
../../bin/express-cli.js --setup-ethstats
- Sets up ethstats on the nodes and gets them ready to send metrics to Ethstats Backend which can be queried from Hasura Console and displayed on Reorgs Frontend.
../../bin/express-cli.js --chaos [intensity]
- Adds dedicated chaos(de-peering) to the network. The intensity parameter is optional and can be set from 1 to 10. If not set, 5 is used.
../../bin/express-cli.js --rewind [numberOfBlocks]
- Rewinds the chain by a defined number of blocks (not greater than 128). Default numberOfBlocks value is 100.
../../bin/express-cli.js --eip-1559-test [index]
- Executes a test to send EIP 1559 tx. In case of a non-dockerized devnet, if an integer [index] is specified, it will use that VM to send the tx. Otherwise, it will target the first VM.
../../bin/express-cli.js --ssh-key-add
- Generates an additional ssh key-pair remotely and stores it locally in the devnet folder. The public key is added to the ssh authorized keys of the devnet's machines. The key can be shared - on a secure channel! - with other devs to grant them access to the remote devnet.
../../bin/express-cli.js --ssh-key-des [keyName]
- Destroys an ssh key-pair given its keyName. The key gets deleted remotely from aws or gcp, cancelled from the authorized ssh keys of the devnet's machines and removed from local devnet folder.
../../bin/express-cli.js --reorg-start [split]
- Reorg the chain by creating two clusters in the network, where [split] param represents the number of nodes that one of the clusters will have (with other being [total number of nodes - split])
../../bin/express-cli.js --reorg-stop
- Stops the reorg previously created by reconnecting all the nodes
../../bin/express-cli.js --shadow-fork [blockNumber]
- Run (mumbai/mainnet) nodes in shadow mode. Please note that there might be an offset of ~3-4 blocks from [block] number specified when restarting the (shadow) node. Currently only works with remote setup (no docker support).
../../bin/express-cli.js --rpc-test
- Executes RPC methods against the provided test data and verifies the response data's compatibility and correctness. Since the tests/rpc-tests/RPC-testdata is a submodule , do the following to initialize and fetch the testdata:
```
git submodule init
git submodule update
```
../../bin/express-cli.js --relay
- Relay transactions from testnet or mainnet to shadow node running in the devnet.
../../bin/express-cli.js --fund-ganache-accounts
- Transfers 10 eth to all the ganache accounts.

Note: to allow express-cli to clone private repos, make sure the git configs in the .env file looks like the following (example for BOR_REPO)

# BOR_REPO="https://<username>:<token>@github.com/<username>/<repo>.git" # example of private repo URL

`Milestone tests`

The express-cli can also be used to perform few simulation based tests for the upcoming milestone feature. Please refer to the steps and requirements mentioned over here for running the tests.

`matic-cli`

matic-cli has to be installed on a ubuntu VM (host) and - through a config file - it will point to other VMs' IPs (remotes).

Host machine will run a Polygon node (bor and heimdall) and a layer 1 node (ganache)
Remote machines will only run a Polygon node each

Requirements

Please, make sure to install the following software/packages on the VMs.

Ubuntu

Build Essentials (host and remotes)

sudo apt update --yes && sudo apt install --yes build-essential

Go 1.18+ (host and remotes)

wget https://raw.githubusercontent.com/maticnetwork/node-ansible/master/go-install.sh \
  && bash go-install.sh --remove \
  && bash go-install.sh

Rabbitmq (host and remotes)
```
sudo apt install --yes rabbitmq-server
```
Docker (host and remotes, only needed in case of a docker setup)
- https://docs.docker.com/engine/install/ubuntu/
- https://docs.docker.com/engine/install/linux-postinstall/)

Node v18.19.0 (only host)

curl https://raw.githubusercontent.com/creationix/nvm/master/install.sh | bash \
  && source /home/ubuntu/.bashrc \
  && nvm install 18.19.0 \
  && node --version

Npm (only host)

sudo apt update --yes && sudo apt install --yes npm

Python 2 (only host)

sudo apt install python2 --yes && alias python="/usr/bin/python2"

Solc v0.5.16 (only host)
```
sudo snap install solc
```
Ganache CLI (only host)
```
npm install --global ganache
```

MacOS

Build Essentials (host and remotes)
```
xcode-select --install
```

Go 1.18+ (host and remotes)

curl -O https://raw.githubusercontent.com/maticnetwork/node-ansible/master/go-install.sh
bash go-install.sh --remove
bash go-install.sh

Rabbitmq (host and remotes)
```
brew install rabbitmq
```
Docker (host and remotes, only needed in case of a docker setup)

https://docs.docker.com/desktop/install/mac-install/

Node v18.19.0 (only host)

curl -o- https://raw.githubusercontent.com/nvm-sh/nvm/v0.40.1/install.sh | bash \
&& nvm install 18.19.0 \
&& node --version

Python 2 (only host)

brew install pyenv
pyenv install 2.7.18
pyenv global 2.7.18
python --version

Solc v0.5.16 (only host)

brew tap ethereum/ethereum
brew install solc-select
solc-select install 0.5.17
solc-select use 0.5.17
solc --version

Ganache CLI (only host)
```
npm install --global ganache
```

Usage

On the host machine, please run

cd \
  && git clone https://github.com/maticnetwork/matic-cli.git \
  && cd matic-cli \
  && npm install

Local dockerized network

Adjust the docker configs based on your setup, and run

mkdir devnet \
  && cd devnet \
  && ../bin/matic-cli.js setup devnet --config ../configs/devnet/docker-setup-config.yaml | tee setup.log

This will create and spin up the devnet. The process will take some time, until this log shows up

DONE Devnet is ready

Once the setup is done, use the aggregated script for local docker deployment

chmod +x ../docker_devnet.sh
../docker_devnet.sh

Logs will be stored under logs/ folder

Note: in case of docker setup, we have provided some additional scripts which might be helpful.

Remote network

Adjust the remote configs and run

../bin/matic-cli.js setup devnet --config ../configs/devnet/remote-setup-config.yaml

Alternatively, this step can be executed interactively with

../bin/matic-cli.js setup devnet --interactive

Once the setup is done, follow these steps for remote deployment In this case, the stack is already running, you would just need to deploy/sync some contracts, as follows:

Move to devnet folder
```
cd matic-cli/devnet
```
Deploy contracts on Child chain
```
bash ganache-deployment-bor.sh
```
Sync contract addresses to Main chain
```
bash ganache-deployment-sync.sh
```

Clean setup

Stop all services, remove the matic-cli/devnet folder, and you can start the process once again

Notes

The ganache URL hostname will be used for ganache http://<host-machine-ip>:9545
Make sure that the host machine has access to remote machines for transferring the data To persist ssh key for remote access, please run:
```
eval "$(ssh-agent -s)"
ssh-add `<.pem file>`
```
We have provided the default config values here to ensure smooth functioning of the process Please check the relative README for more accurate description of such configs These files are used as templates and dynamically modified by express-cli, hence they should not be deleted nor any modification remotely pushed Therefore, they are under .gitignore, and in case you do not want those changes to be reflected in your local git, you can use the commands

git update-index --assume-unchanged configs/devnet/remote-setup-config.yaml
git update-index --assume-unchanged configs/devnet/docker-setup-config.yaml

to undo, please use

  git update-index --no-assume-unchanged configs/devnet/remote-setup-config.yaml
  git update-index --no-assume-unchanged configs/devnet/docker-setup-config.yaml

License

MIT

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

README.md

README.md

Testing Toolkit

Table of contents

`express-cli`

Requirements

Auth Configuration

Commands

`Milestone tests`

`matic-cli`

Requirements

Ubuntu

MacOS

Usage

Local dockerized network

Remote network

Clean setup

Notes

License

Files

README.md

Latest commit

History

README.md

File metadata and controls

Testing Toolkit

Table of contents

express-cli

Requirements

Auth Configuration

Commands

Milestone tests

matic-cli

Requirements

Ubuntu

MacOS

Usage

Local dockerized network

Remote network

Clean setup

Notes

License

`express-cli`

`Milestone tests`

`matic-cli`