Some new ideas

[mebitek]

1. Add a gate-option (at least in Curve-track mode) which is a hole step long (Gate 100%) and seemlessly ties to the next step if it is also a Gate 100% - step. Background: I like to try this in addition to 8 curve tracks and for example with an NLC-Clump (or any other VCAs) to realize something like a sequential switch matrix. Tho, not sure, if it is really practical.
2. I see you already added some new waveforms! I suggested you an editor for creating own curve-waveforms: Just a thought, which came to mind and maybe a bit easier to implement, as I recorded some CV today. Maybe its possible to just mark a certain section of the recorded CV and store this as a user-waveform?
3. A more experimental use-case of the Performer is to use it as an oscillator. Especially the curve-track-mode invites to experiment with this, as you can "draw" your waveform. But a problem with this is, that you need to set the clock at least to 300bpm. But this avoids to use Westlicht as a sequencer anymore - of course. So my suggestion would be to just increase the multiplier amount significantly to easily get a track into the audio rate without increasing the overall clock speed. And an possibity would be a dream to still be able to live record CV and directly listen to it at audio rate (like at the modules Gliss or Proteo). But I think this would be more complicated, since it would need a live-scaling of the recording...
   Then also a 1V/oct-routing option, which would be needed to be independant from the global clock-speed... not easy implement I estimate, but maybe you are curious about it as well!