usbnoise.rs

//! Prints raw samples from the capacitor random number generator.
//! These would not usually be used directly, instead use `CapRng`.
//! Raw samples are useful to analyse the entropy.

#![no_std]
#![no_main]

#[allow(unused_imports)]
use defmt::{debug, info, warn, error};
use {defmt_rtt as _, panic_probe as _};

use core::fmt::Write;

use embassy_rp::gpio::Pin;
use embassy_executor::Spawner;
use embassy_futures::join::join;
use embassy_rp::bind_interrupts;
use embassy_rp::peripherals::USB;
use embassy_usb::class::cdc_acm::{CdcAcmClass, State};
use embassy_rp::usb::{InterruptHandler};
use embassy_usb::{Builder, Config};

bind_interrupts!(struct Irqs {
    USBCTRL_IRQ => InterruptHandler<USB>;
});
    
#[embassy_executor::main]
async fn main(_spawner: Spawner) {
    info!("top");
    let mut p = embassy_rp::init(Default::default());

    // Create the driver, from the HAL.
    let driver = embassy_rp::usb::Driver::new(p.USB, Irqs);

    // Create embassy-usb Config
    let mut config = Config::new(0x6666, 0x5c4f);
    config.manufacturer = Some("Matt Johnston");
    config.product = Some("caprand raw noise");
    config.serial_number = Some("12345678");
    config.max_power = 100;
    config.max_packet_size_0 = 64;

    // Required for windows compatiblity.
    // https://developer.nordicsemi.com/nRF_Connect_SDK/doc/1.9.1/kconfig/CONFIG_CDC_ACM_IAD.html#help
    config.device_class = 0xEF;
    config.device_sub_class = 0x02;
    config.device_protocol = 0x01;
    config.composite_with_iads = true;

    // Create embassy-usb DeviceBuilder using the driver and config.
    // It needs some buffers for building the descriptors.
    let mut device_descriptor = [0; 256];
    let mut config_descriptor = [0; 256];
    let mut bos_descriptor = [0; 256];
    let mut msos_descriptor = [0; 16];
    let mut control_buf = [0; 64];

    let mut state = State::new();

    let mut builder = Builder::new(
        driver,
        config,
        &mut device_descriptor,
        &mut config_descriptor,
        &mut bos_descriptor,
        &mut msos_descriptor,
        &mut control_buf,
    );

    // Create classes on the builder.
    let mut class = CdcAcmClass::new(&mut builder, &mut state, 64);

    // Build the builder.
    let mut usb = builder.build();

    // Run the USB device.
    let usb_fut = usb.run();

    // Do stuff with the class!
    let echo_fut = async {
        loop {
            class.wait_connection().await;
            info!("Connected");
            let pin = &mut p.PIN_10;
            let _ = run(pin, &mut class).await;
            info!("Disconnected");
        }
    };

    join(usb_fut, echo_fut).await;
}

async fn run<'d, D: embassy_usb_driver::Driver<'d>>(pin: &mut impl Pin, class: &mut CdcAcmClass<'d, D>) -> Result<(), ()> {

    let low_cycles = 1;
    let mut noise = caprand::cap::RawNoise::new(pin, low_cycles);

    // discard one sample
    noise.next();

    loop {
        // usb packet has 64 limit
        let mut b = heapless::String::<64>::new();
        while b.len() <= b.capacity() - 2 {
            let (c, _valid) = noise.next().unwrap();
            write!(b, "{:02x}\n", c).unwrap();
            // if valid {
            //     write!(b, "{}\n", caprand::cap::lsb(c)).unwrap();
            // }
        }
        class.write_packet(b.as_bytes()).await.unwrap()
    }
}